Reviews Brake Line Lock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

8" Pneumatic Swivel Caster with Brake - Black Rubber Wheel - 300 lbs. Capacity - Service Caster Brand

  • Weight capacity ranges from 200 lbs on the 6” caster, 300 lbs on the 8”, 350 lbs on the 10” and 450 lbs. on the 12”..
  • Top plate measures at 4″ x 4 1/2″ with a bolt hole pattern of 2.625″ x 3.625″ to 3″ x 3″ and can either be bolted or welded on..
  • Brake options include top lock brake (TLB), side lock brake (SLB), bolt-on swivel lock (BSL), or combinations of each. The TLB (6, 8, and 10” casters) places a positive locking force against the wheel top, whereas the SLB (12” caster) places the force against the wheel side. The bolt-on swivel lock (BSL) is field installable and converts a swivel caster to rigid for straight-line tracking at any 90 degree angle via a spring-loaded bolt inserted into one of 4 notches found on the swivel raceway..
  • Find other wheel materials, sizes and all Service Caster products at our Amazon Storefront. Click on the “by Service Caster” link above the main title on any Service Caster page listing..
Check Stock

Fuel Line Clamp Set, Hose Pinch Pliers for Radiator, Brake, Coolant and Gas Line, Red (3 Sizes)

  • Hose Pinch Pliers: These flexible fuel line clamp pliers can lock into position leaving your hands free to repair.
  • Multi-Use: These gas line clamps are the ideal coolant, fuel, and brake line clamps tool for auto repairs at home or for professional mechanics.
  • Reliable Material: The fuel line pliers kit is made from durable, lightweight, non-conductive, and rust-resistant nylon.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • Comes With: You will receive a total of 3 brake hose clamp pliers in 3 different sizes.
  • please note that these are not for use on rigid, reinforced, or high-pressure lines.
Check Stock

Swpeet 67Pcs Universal Bicycle Shifter Cable Housing with Bike Cable Cutter Kit, Brake Shift Cable End Caps Tube S Buckle Inside Tail Caps and O-Rings Perfect for Bike Bicycle

  • What You Get ------- In this kit, You will get 67Pcs Bike Bicycle Accessory Kit, Including 1Pcs Cable Cutter.
  • 6Pcs General Front Shift Cable Wire (1.7 m).
  • 1Pcs General Rear Brake Cable Wire (2.1 m).
  • 2Pcs V Bike brake noodle cable guide pipe.
  • Heavy Duty Stainless Steel Bike Cable Cutter ----- This cable cutter made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. Works excellent in cutting up to 5/32" cable of all kinds. Meanwhile, The safety lock prevents accidental opens and cuts that might hurt you..
  • Black Thread tube S buckle and C-clip with V Bicycle Brake Noodles Cable ----- The cable end crimp prevents to be scratched by the cable end and keep cable ends nice and tidy, the silicone O-ring keeps your bike from the grind lacquer. These cables can be cut into suitable length for bike to meet your needs. All required end caps & cable tips. Made of rubber tube with a plastic pipe, reduce ....
Check Stock

Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line

  • What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
  • Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
  • V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
  • Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
  • Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check Stock

Fulton 142430 Dual Speed Winch with Hand Brake - 3700 lbs. Capacity, 1 Pack

  • 3,700 lb. capacity two-speed winch with brake one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch ‘Comfort Grip’ handle.
  • Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just lift the shift lock and slide the shaft into the desired gear position.
  • Neutral free-wheel position allows quick line pay out without spinning the handle built in hand brake adds convenience and safety.
  • High-carbon steel gears for superb strength and long-term durability stamped carbon steel frame provides rigidity, important for gear alignment, and longer cycle life.
  • Designed for use with 7/32 inch cable up to 90 feet long – not for use with straps.
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

Comcrosfly 10.6in Large Kite Reel Kite String Winder Omnibearing Line-Guide Ratchet Lock with Reel Grips, Abdominal Support bar & Webbing Strap Professional for Men and Women

  • 【Kite String Winder with Support Bar & Webbing Strap】10.6in Kite Reel Diameter,easy and comfortable to hold -A PROFESSIONAL KITE REEL WINDER FOR ALL KITE PLAYERS.
  • 【Kite Reel of Omnibearing Thread - Guide】allow to pay out or take in kite line from all direction, protecting kite line from wearing / abrasion and prevents from kite line tangling.
  • 【Large Ball Bearing of Kite string winder-SMOOTH】 supports smooth while high-frequency rotation. Send your kite into high air in seconds.
  • 【Kite Reel's Thumb Control Disc Brake -FAST】use your thumb to press and release the metal plate with little effort , all control of the pace of reel in your hand.
  • 【Ratchet Lock Device-EASY】rotating lock device clockwise (from L to R), ratchet lock of reel will immediately stop kite line from paying out but in ..
Check Stock

Kuryakyn 1462 Motorcycle Handlebar Accessory: Universal Drink/Cup Holder with Mesh Basket for Clutch/Brake Perch Mount, Chrome

  • Instant accessibility to your beverage while on the go.
  • Features "fingers" to firmly grasp onto various sized containers and keep in drink holder.
  • Chrome piece quality construction that blends in with your bike.
  • Black mesh basket and solid bottom ensuring your container does not slip through holder.
  • Includes drink holder basket, perch mount arm, anti-seize packet, perch mount kit, and hardware kit: (2) shims, (1) 5/16" split lock washer, and (1) thumb nut.
  • Set of hex wrenches suggested for installation (not included).
  • Compatible with BMW models: '16-'19 R nine T Models, Ducati: '15-'19 Scrambler, Honda GoldWing: GL1500, '01-'19 GL1800 & '13-'16 F6B, Harley-Davidson: '82-'19 H-D Models Clutch or Brake Perch Mounts, (except '15-'19 XG Street 500/750), Suzuki: Boulevard M/C50, C90, M109, Victory: '17 Octane installs on brake side only.
  • Honda: VT1300 Custom Line Sabre, Stateline, and Interstate, Fury, VTX1300/1800, Shadow 750 Ace, Aero, Phantom, RS, Spirit, Shadow 1100, '14-'15 Valkyrie, Rebel 300 & 500, Indian clutch or brake perch mounts and Scout brake side only, Kawasaki: Vulcan 900 brake side only, Vulcan 1500/1600, Vulcan 2000 brake side only, Yamaha: Road Star, Warrior, V Star, Bolt, XSR 900&700, SCR900, and Stryker (brake side only), and Venture.
Check Stock