Reviews Brake Light Flasher

4PCS Upgraded Brake Light Flasher Controller, 12V-85V Flash Strobe Controller Flasher Module for Most Brake Lights Including LED Clusters Cars Motorcycles Electric Bicycles and Other LED Lights

  • UPGRADED DESIGN: Our latest version brake light flasher is fit for DC 12-85V. Has a wider using range design than most 12-24V brake light flashers on market. Suitable for all most motor vehicles, cars motorcycle vehicles electric bicycles, and other LED lights. That's why you are suggested to choose us..
  • INCREASE SAFETY: Add the flashing strobe module box, to get the strobe feature on the 3rd brake light! A quick and cost-efficient way to make your intention to slow or stop more noticeable to those behind you..
  • THIRD BRAKE LIGHT STROBE FEATURE: Flashing Module designed for 3rd brake LED light. When you press on the brake pedal, the light will do a quick strobe 4 times, then 4 times slow blinks, then stay on steady. Improve traffic safety warnings, to reduce rear-end accidents..
  • EASY TO INSTALL: On the module, has 4 wires, cut the wires going to your third Brake light. Hook the 2 wires going to your third brake light, to the input of the module. Then take the output wires of the module to the light itself. You're done! (Note: Do not install the negative wire in series!).
  • 4 IN 1: You will get 4 pack compact block controller unit, easy to mount with the supplies 2-sided tape, value for the units. And got our friendly service! Feel free to write to us via Am....
Check Stock

Yibid LED Integrated Tail Light Compatibility for Honda Grom MSX 125 2014-2018 Motorcycle with 1pcs Orange 2-Pin Turn Flasher Relay Brake Indicator Sequential Lights for MSX125/SF CBR650F CTX700N

  • Brand New Taillight assembly With 1pcs 2-pin Orange Led turn signal flasher relay(B pole=Input，L pole= output---Must in Right connection or Not....
  • Package Included: 1pcs Taillight assembly & 1pcs 2-pin Orange Led turn signal Flasher relay (NO taillight Relay Including!!! you can used your store....
  • Wire Connection: Black Line:Negative ；Red Line:Red Lighting(Brake light) ：Blue Line:Red lighting(Running light) ；2 *Yellow Line:Yellow(Turn....
  • Fitment：Compatibility for HONDA MSX /Grom 125 2013 - 2016 , CB 650 F 2014 - 2015, Compatibility for HONDA CBR 650 F 2014-2015 , Compatibility for....
  • Note！！LED light usually use little bit power, sometimes after you install, the LED light blink so fast or not blink, if you have this issue, you....
Check Stock

Tusk Motorcycle Enduro Lighting Kit with Handguard Turn Signals with Taillight

  • See fitment guide image for additional Machines this item fits. The Tusk Motorcycle Enduro Lighting Kit is an easy to install lighting kit that doesn’t require you to cut into or interfere with your motorcycle’s wiring..
  • Kit comes complete with wiring harness, MX D-Flex handguards with LED turn signals, LED flush mount rear turn signals, flasher relay, horn, hydraulic brake switch, LED taillight/brake light, dual sport folding mirror, On/Off switch, and control switch..
  • A rechargeable battery pack is included with models that don’t have an existing battery. Can be recharged quickly with the Tusk 1 amp battery charger part #1263750002 (sold separately)..
  • The kit is intended for motorcycles with existing headlights..
Check Stock

WINOMO 2pcs Flash Strobe Controller Car Flasher Module for Brake Light Tail Stop Light

  • Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,This flasher can....
  • This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When....
  • Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best....
  • Complete sealed technology make it waterproof, short circuit prection..
  • Compatible with all types of brake lights including LED clusters, such as cars, motorcycles, electric bicycles and other LED lights.
Check Stock

Brake Light Flasher Strobe Brake Light Strobe Tail Light Strobe Brake Flasher LED Flash Module Flash Strobe Controller for Motorcycles Cars Trucks Brake Light Tail Stop Light 12-30 V 4 Pieces

  • What you can receive: there are 4 pieces of flash strobe controllers and 4 pieces of double sided adhesive tapes in the package, which can alert the....
  • 2 Flash speeds: when braking, this brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original....
  • Serviceable material: the car flasher modules are made of quality ABS material, sturdy and reliable to use, not easy to wear or tear, can be kept and....
  • Simple installation: the flash module measures about 4.8 x 2.7 x 1.4 cm/ 1.89 x 1.06 x 0.55 inches, 15 cm/ 5.9 inches in wire length, and comes with....
  • Wide range of applications: these car brake light flashers can enhance your brake light function, are necessary assistants in your daily life, can be....
Check Stock

Blaster-X Integrated LED Tail Light for 2014-2023 Honda Grom (Smoked Lens)

  • ...lity smoked lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology Plug and play connectivity with OEM connectors! ***REQUIRED ACCESSORY: ELFR-1_QD Flasher Relay***. Recommended Accessory: Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction.
  • Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation..
  • Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side..
Check Stock

FXC 2x 24W Flash Strobe Controller Flasher Module for LED Brake Light Tail Stop Light 12-30V

  • Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well..
  • This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light..
  • Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights..
  • Complete sealed technology make it waterproof, short circuit prection..
  • Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question..
Check Stock

Brake Light Flasher Strobe Brake Light Strobe Tail Light Strobe Brake Flasher LED Flash Module Flash Strobe Controller for Motorcycles Cars Trucks Brake Light Tail Stop Light 12-30 V (8 Pieces)

  • 2 Flash speeds: when braking, this brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed, which can warn your following drivers when you stop with a catchy blinking light.
  • Serviceable material: the car flasher modules are made of quality ABS material, sturdy and reliable to use, not easy to wear or tear, can be kept and applied for a long time.
  • They also adopt complete sealed technology, which can protect modules from water and avoid short circuit, giving you a satisfactory using experience.
  • Simple installation: the flash module measures about 4.8 x 2.7 x 1.4 cm/ 1.89 x 1.06 x 0.55 inches, 15 cm/ 5.9 inches in wire length, and comes with double sided adhesive tapes for easy installation.
  • You only need to connect red wire to positive pole, and black wire to negative pole, very easy and convenient, and it's suggested to install it in the third brake light.
  • Wide range of applications: these car brake light flashers can enhance your brake light function, are necessary assistants in your daily life, can be widely applied to all types of cars' brake lights with 12 to 30 V, such as cars, trucks, motorcycles, electric bicycles and more.
Check Stock

Brake Light Flasher Brake Light Strobe Tail Light Strobes Brake Flasher Module Car Led Flash Module Flash Strobe Controller for Motorcycles Cars Trucks Brake Light Tail Stop Light 12-30 V (2 Pieces)

  • 2 Flash speeds: when braking, this brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed, which can warn your following drivers when you stop with a catchy blinking light.
  • Serviceable material: the car flasher modules are made of quality ABS material, sturdy and reliable to use, not easy to wear or tear, can be kept and applied for a long time.
  • They also adopt complete sealed technology, which can protect modules from water and avoid short circuit, giving you a satisfactory using experience.
  • Simple installation: the flash module measures about 4.8 x 2.7 x 1.4 cm/ 1.89 x 1.06 x 0.55 inches, 15 cm/ 5.9 inches in wire length, and comes with double sided adhesive tapes for easy installation.
  • You only need to connect red wire to positive pole, and black wire to negative pole, very easy and convenient, and it's suggested to install it in the third brake light.
  • Wide range of applications: these car brake light flashers can enhance your brake light function, are necessary assistants in your daily life, can be widely applied to all types of cars' brake lights with 12 to 30 V, such as cars, trucks, motorcycles, electric bicycles and more.
Check Stock

Flasher Relay 3 Pin Adjustable LED Flasher Relay LED Flasher Blinker Turn Signal Light Blinker Universal for 12V 24V Automobiles and Motorcycles

  • 12V 24V Flasher Relay: This is a superfine quality LED flasher relay universal for 12V 24V automobiles and motorcycles.
  • Practical and Durable: The LED flasher blinker is helpful in solving problems related to turn signal LED light, such as rapid flashing, no flashing or....
  • Stable Performance: This LED flasher relay adopts advanced SMD technology, features short circuit automatic protection, overload automatic protection,....
  • Easy Installation: The turn signal light flasher with standard 3-PIN connector design, easy to install, plug and play.
  • Working Parameters: The size of this turn signal flasher is 5.3 x 3 x 2.6cm / 2.1 x 1.2 x 1 inches, and its applicable power is 0.1-150W.
Check Stock