Reviews Brake Hose Adapter

YEENOR MT200 MTB Hydraulic Disc Brake Set, Left Front 800mm Right Rear 1400mm Aluminum Alloy Bike Bicycle Brake Fit for Shimano Mountain Bike XC Trail/e-Bike/Fat Bike

  • 【Brake Set size】MT200 for Shimano hydraulic brake, the left front brake hose length is 800mm, and the right rear brake hose length is 1400mm.pre-installed with resin pad B01S.160mm rotor compatible by default, IS/PM universal. Suitable for all sizes of handlebars..
  • 【Easy braking】MTB hydraulic oil brakes, dual piston brakes, no matter how fast the bike is going, how steep the terrain is, how wet the environment is, a gentle pull on the brake lever will stop the bike immediately..
  • 【Quick Installation】The MTB hydraulic brake set comes with a 160mm PM/IS universal mounting adapter for direct installation and use. no need to assemble, it can be installed out of the box..
  • 【Sturdy and durable】Remember it fits SHIMANO, the precision manufacturing process ensures its durability. High strength aluminum alloy brake lever is not easily damaged and more wear-resistant. Resin pad has better heat dissipation and better braking effect. Less maintenance, Provides a safer ride..
  • 【Conforms to human body design】 The three-finger brake lever is designed according to the human body. The brakes are easy to operate, front and rear, left and right, and the sufficiently long fuel line can be adapted to almost all models..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator

  • Features a 2.3 gallon (8.8 liter) capacity air operated fluid evacuator for large jobs.
  • Automatic shut-off valve prevents overfilling.
  • Can be used to extract a wide-range of fluid types from transmission fluid, coolant, brake fluid, gear to engine oil.
  • Reservoir is constructed of durable polyethylene and will not rust or corrode.
  • Kit comes with 5 feet of flexible hose, dipstick tubes and a universal brake-bleeding adapter.
Check Stock

Swpeet 84Pcs 10 Sizes Zinc Plated Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Agriculture, Plant & Construction

  • It is used as a car hose separator clamp fuel line mounting divider hose fitting adapter..
  • Made of aluminum alloy, rust proof, anti corrosion, waterproof, oil proof, durable in use..
  • Detail Size: 50x23x12mm / 1.97"x0.91"x0.47"(L*W*H).
  • Easy to install and convenient to use. Universal fit for AN8 gas/water/oil/fuel brake hose..
  • Package Include: 4 Pcs x AN8 Hose Separator Clamps..
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • ...re plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the calipe....
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock

Hromee Fuel Pump and Vacuum Tester Gauge Carburetor Pressure Diagnostics Leakage Tool Kit

  • ...aust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components..
  • CAR VACUUM TESTER - Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)..
  • PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg.
  • Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2..
  • HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded fitting adapter..
  • EASY STORAGE - Heavy-duty 11”x 5.7”x 2.4”inch (28cm x 14.5cm x 6cm) plastic blow-molded carrying case for easy transportation, safe storage, an....
Check Stock

ELEAD 500cc Oil Extractor Pump, Oil Transfer Pump, Fluid Extractor, Fluid Syringe Extractor, Car Vacuum Fuel Transfer, Siphon Pump for Gasoline Hand Cleaner for auto Mechanics

  • ...l fluids such as transmission fluid, antifreeze, power steering fluid, gear oil, and brake fluid from ATVs, cars, boats, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • [The Accessories of Oil Extractor ] Gear Oil Pump includes:1 clear liquid syringe with locking adapter, 2 extension tubes (length 8" diameter 1/4" and length 8" diameter 3/8" and locking cap at the end of the hose). gear oil pump extending transmission fluid pump'service life..
  • [The Materials of Liquid Transfer Pump ] Oil Pump Extractor uses new quality eco-friendly materials for strength, sealing and durability. It is also removable for easy cleaning and maintenance..
  • [Easy to Use Oil Transfer Pump ] Insert the hose into the adapter,can be locked,press the black button to easily remover the hose. extended syringe hose helps draw or inject liquid easily..
  • [The Packaging of Oil Pump ] Oil Change Pump with exquisite color box , bring you high-end beautiful visual experience, can also be as a gift..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • ...: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock