Reviews Brake Fluid Tool Kit

CYCOBYCO Avid Bicycle Brake Bleed Kit for All SRAM Series

  • Drip-free bleeding kit for All hydraulic SRAM disc brakes.For example Sram Guide R, RS,RSC,Level T TL ,DB1, DB3,DB5,Bleeding Edge Tool,Guide Ultimate/Level ULT/TLM/TL RED eTap HRD.
  • Hydraulic Disc Brake Bleed Kit for All Avid Series.For example Juicy 3/5/7/Ultimate, Elixir 1/3/5/7/9/R/CR/MAG,Code R/Code 5,XO,XX,WorldCup.
  • Compatible Formula (All Series) R1, RX, K18, K24, ORO, THE ONE, FR, MY10.
  • BIKE BRAKE FLUID- Without DOT5.1 brake fluid..
  • Keep Your Bicycle Brakes Working Well - Breathe new life into your bike's hydraulic disc brakes..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • MAKE BREAK REPAIR JOBS EASIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tensi....
Check Stock

KHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid

  • CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
  • MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
  • EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
  • PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. （1 AAA battery needed for use, not included in the Pack).
  • QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check Stock

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters

  • ◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
  • ◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
  • ◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
  • ◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
  • ◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.
Check Stock

OEMTOOLS 27311 Power Steering and Brake Bleed Adapter Kit Works w/Hand Vacuum Bleeder Brake Line Bleeder Kit w/ 2 Rubber Power-Steering Adapters

  • POWER STEERING BLEEDER: Power steering adapter kit works on most vehicles.
  • Meant to be used with a hand vacuum brake bleeder.
  • ACCESSIBLE BRAKE BLEEDER KIT: Not just a power steering bleeder.
  • Select one of 3 different sized brake bleed adapters for your caliper, hook up the....
  • REMOVE AIR FROM LINES: Remove trapped air with this power steering and brake bleeder adapter kit.
  • Check that your vehicle’s power steering reservoir....
  • HAND VACUUM PUMP READY: Couple the power steering fluid tool and brake system bleeding tools with a hand vacuum pump to effectively bleed air without....
  • DURABLE TIGHT FITTING COMPONENTS: This power steering vacuum adapter kit comes with 2 EPDM tapered rubber adapters and 3 rubber brake bleeder....
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock