Reviews Brake Fluid Test Strips
Amniotic Fluid Test Strip, 2pcs Amniotic Fluid Test Strips Healthy Testing Strips Maternity Home High Sensitivity Feminine Ph Test Strips Test Strips for Travel for Family Members
- Health Care Sanitary High Sensitivity: When our amniotic fluid test pads related report diagnoses amniotic fluid leakage, the sensitivity reaches 97.6%, which can effectively detect whether the amniotic fluid is broken. Test strips for women is easy to use..
- Testing Strips Hygiene: Our PH test strips are individually sealed and packaged, which is clean and hygienic. When you do not use it, the test paper will not be contaminated, which is very helpful to your health..
- First Time Mothers: Our amniotic fluid test papers are specially prepared for first time mothers, so that expectant mothers will not be too worried about the condition of amniotic fluid..
- Test Strips PH Value Detection: Amniotic fluid is alkaline and the PH detection limit is 6.7‑6.9. If the PH value rises and the amniotic fluid detection strip is stained with vaginal fluid, the indicator on it will change from yellow to blue or blue‑green.
- Test Paper Simple Operation: Our amniotic fluid test papers are very easy to operate, just stick it on the underwear like a normal pad, and tear it off after use..
Check StockZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen
- Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
- the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
- LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
- Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
- Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check StockNEXPEAK Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool …
- Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or....
- Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
- 5 LED indicates you the test result and tells you brake fluid quality, it is convenient to know if the brake fluid is healthy or not..
- Battery: 1 x AAA/1.5V (not included). When the green LED doesn’t light up, it means the battery has run out of power and need to replace a new....
- Attention: wash the test probe with tab water after every use..
Check StockVXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators
- ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
- ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
- ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
- ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
- ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check StockAutomotive Brake Fluid Detector - Universal Car Brake Fluid Tester with High-Precision Probe for Auto DOT3 DOT4 DOT5.1 Hydraulic Fluid/Liquid/Oil Moisture Analyzer
- 【You Must Have】Brake pressure was transmited by brake fluid, the pressure transmit will out of function once brake fluid include too water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition..
- 【Scope of Application】Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. It's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops..
- 【Brake Fluid Tester】When the brake oil moisture content is detected, the LED indicator will lights up. The brake fluid tester will emit a “beep”alarm when the water content exceeds 3% of the red light. The alarm is loud and stereoscopic, allowing you to easily measure even in noisy environments..
- 【Special Design】High resolution LCD display with backlit provides an intuitive interface for easy reading data even in the dark. The fuselage has good texture, one button and one function, easy to operate. Buzzing alarm system, test result is clear absolutely..
- 【Ideal Tool】The automotive brake fluid tester has 250mm goo....
Check StockTaxutor 2pcs Brake Fluid Tester Pen Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid
- Check the health status of DOT3, DOT4 car brake fluid, dangerous if you do not change brake fluid timely.
- 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
- Easy to use simply power up, dip probes into brake fluid and read results,Only takes seconds to know the results.High quality electrical conductivity mental design, super strong ABS shell, small compact size, easy to carry in pocket.
- Operated by a LR03 AAA 1.5V battery (not included), automatic shutdown after about 15 seconds of inactivity.
- PLEASE NOTE: Please use clean water to clean after the test, otherwise the brake fluid may corrode the test pen.
Check StockPhoenix Systems (3003-B) Brake Fluid Test Strips, 2 Strips Per Package, Reveals Brake Fluid Condition
- May save you from paying for an un-needed brake fluid exchange..
- Gives you the peace of mind that your brake fluid is good and is safely performing its proper function..
- Identifies potential brake flulid related problems before they occur -thereby ensuring your safety..
- Simply remove the test strip from the foil wrapper, dip it into your brake fluid and 60 seconds later you will know the condition of your brake fluid. (scientific proof).
- Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check StockPelvana Vaginal pH Balance Test Strips for Women 100 Strips - Vaginal pH Test Strips to Monitor Feminine Health & Prevent Infections
- INTENDED USE - These strips are designed to measure the pH level of your vaginal fluid when you are experiencing unwanted vaginal symptoms, such as vaginal itching, burning, a foul vaginal odor, extreme dryness, or an unusual discharge. Typical vaginal acidity is between 3.5 and 4.5 when your vaginal pH level is higher, it may indicate an infection..
- HOW TO TEST - Use a cotton swab to collect a sample of vaginal fluid and wet the reagent pad at the tip of the test strip, wait for 30 seconds, and then compare it to the color chart. Please review the common vaginal infection chart in the product booklet. NOTE - Yeast infections do not usually have an elevated vaginal pH level, so the test strips may not change color even though you are experiencing the symptoms listed..
- DO NOT PURCHASE - This product for ovulation monitoring or urinary tract infection (UTI) testing. These test strips were not designed for those purposes. DO NOT urinate on these test strips, that is not how they work..
- PREMIUM QUALITY STRIPS - Our pH test strips are made of high-quality plastic, not paper, so they will not absorb your sample or any moisture fr....
Check StockKHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid
- CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
- MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
- EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
- PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. (1 AAA battery needed for use, not included in the Pack).
- QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check StockPTE Brake Fluid Tester - calibrated for DOT 4 Brake fluids
- Quick and easy way to test for moisture content in the brake fluid.
- LED light indicators show percentage of water in the brake fluid.
- Calibrated for cars using DOT 4 brake fluid only (found in most cars produced since 2006).
Check Stock