Reviews Brake Fluid Pressure Tester

Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving.
  • EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off..
  • 5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
  • USEFULL : Supports DOT3 DOT4 DOT5 brake fluid ..
  • EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock

eOUTIL Brake Fluid Tester Pen, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • SAFE&USEFUL---The unit is Mini Pen Liquid Moisture Water Tester Tool. Check the health status of DOT3, DOT4, DOT5 car brake fluid, it will be safer for your driving..
  • 5 LED INDICATORS---5 LED to indicate percentage of water in the brake fluid with three colors green yellow and red. Even in the dark does not affect reading, make reading data easier..
  • EASY TO USE---The brake fluid tester is easy to use. Check the quality of brake fluid in car only takes seconds. Make it easier to operate for beginner. It's a must-have car tool for your car owners..
  • PORTABLE&DURABLE---Brake fluid tester pen is small compact size, easy to carry. Super strong ABS shell, has long service life..
  • AUTO TURN OFF---In order to save power, this test pen has the automatic shutdown function, it will automatically turn off the power 15 seconds after starting every time..
Check Stock

Brake Fluid Tester Pen with 5 LED Indicators Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • 【What does it do?】 If the moisture content of the car's brake fluid is too high, it will cause the car's brakes to fail, so it is very necessary to have a brake fluid tester. You can check your brake fluid at any time..
  • 【Application range】This brake fluid test pen supports most vehicles with DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
  • 【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
  • 【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
  • 【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality pr....
Check Stock

NEXPEAK Professional OBD2 Scanner NX501 with Brake Fluid Tester Pen

  • ...erts, turn-off the Malfunction Indicator Lamp (MIL), and locate bad O2 sensors. It also empowers you to proactively monitor car battery health status, alerting you when it’s time to replace your battery. It’s the perfect scan tool for fixing and maintaining your car, helping you save time and money..
  • Brake Fluid Tester: Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or not. Keep safe driving..
  • Brake Fluid Tester: Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • OBDII Scan Tool: Wide Array of Compatibility: Accurately read and erase error codes on all OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). The NEXPEAK NX501 is compatible with most US vehicles that are model year 1996 or later – including sedans, SUVs, light trucks, and 12V diesels. This is a plug-and-play engine diagnostic code reader (both generic and manufacturer specific codes) – no extra batteries or apps required..
  • Free Updates and More: Each NEXPEAK NX501 scanner comes with free lifetime smart update service. Our built-in memory card allows you to st....
Check Stock

Thorstone Brake Bleeder Kit with Hand Held Vacuum Pump Tester | 16pcs Brake Clutch Bleeder Tool with Adapters for Car Kitchen Uses | One-Man Brake Bleeding System Apply to Bike, Motorcycle, Car, Truck

  • 2-IN-1 TOOL SET - This one-man manual brake bleeding kit enables you to bleed brakes, test vacuum readings through the pressure gauge, and pump out oil, power steering fluids, and many other fluid types. Can be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. To flush old brake fluid and air, and guide the new fluid to fill the brake system..
  • VACUUM SYSTEM TESTER - A manual pump with vacuum gauge could be widely used in testing vehicle vacuum system/household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag. Test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle. Equipped with vacuum gauge, convenient readout of pressure, pressure range: 0-30inHg, 0-760mmHg..
  • HIGH DURABILITY & SEALING - Pressure-proof stalinite which is stronger than normal material. The metal parts are made of alloy and copper, with strong corrosion-proof performance. Our tubes are made from premium PVC for high resilience, heat resistance, and maximum sealing performance. Brake bleeding of each wheel takes less than 5 minutes with great ease..
  • COMPLETE ACCESSORIES - Include vacuum pump with gauge, 4.5oz reservoir jar, 3 transparent hoses, 6 adapters, 2 connectors and a blow mold ca....
Check Stock

NEXPEAK Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool …

  • Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or....
  • Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • 5 LED indicates you the test result and tells you brake fluid quality, it is convenient to know if the brake fluid is healthy or not..
  • Battery: 1 x AAA/1.5V (not included). When the green LED doesn’t light up, it means the battery has run out of power and need to replace a new....
  • Attention: wash the test probe with tab water after every use..
Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ...d generating air bubbles during the process thanks to its pulsating brake system. We offer a full line of master cylinder adapters with this equipment, available for all vehicles in European, US, and Asian.
  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one person supports 2 power modes: 12V batteries & 110V/220V power outlet, which allows you to exchange brake fluid any time and anywhere - An essential auto tool for personal ....
Check Stock

Motive Products - 0107 Power Pressure Brake Bleeder for Ford and Asian Cars and Trucks

  • Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
  • Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
  • Heavy duty 2 quart pressure tank holds enough fluid to do complete flush and bleed.
  • Built-in hand pump (no other pressure source is needed).
  • Precision pressure gauge ensures safe and effective operation. Push cap down until it seats. Twist to seal.
Check Stock

Motive Products - 0104 Power Air Cooled Volkswagen Power Brake Bleeder Kit

  • Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
  • Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge.
  • Works on most Air Cooled VW's including Bugs, Buses, Square Backs and Fast Backs.
  • Built-in hand pump (no other pressure source is needed) and precision pressure gauge ensures safe and effective operation..
Check Stock