Reviews Brake Fluid Drain Bottle

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ...on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle wi....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • ...TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent hose + universal black taper....
Check Stock

ARES 70923-1-Liter Vacuum Brake Fluid Bleeder - Hanging Hook and Locking Trigger Allows for Hands Free Operation

  • ITEM SPECIFICATIONS: This Brake Fluid Bleeder uses a standard workshop air supply and features a working pressure of 71-113 PSI with a maximum pressure of 113 PSI..
  • CONVENIENCE: Our 1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation..
  • TRANSPARENCY: The transparent drain hose allows you to visually inspect the old fluid during the draining process. You can easily flush your entire disc or drum brake system with this brake fluid bleeder!.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES 1L Vacuum Brake Fluid Bleeder, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..
Check Stock

Mission Automotive 16oz Brake Bleeding Kit - Easy Use One Person Brake Fluid Bleeder with Magnet Mount and Hanging Lanyard - for Car and Motorcycles Brake Systems 16oz Fluid Capacity

  • Brake Bleeding Made Easy! Our brake bleeder kit has been designed to make brake maintenance as easy as possible and help you get the job done from your garage without making excess mess..
  • How It Works: It couldn't be easier to use! Just attach the valve on out 12" brake bleeder hose to your brake system open the valve and pump a few times on the brake until the fluid hose is full with no air bubbles.
  • Includes Magnet Mount And Hanging Lanyard: No need to hold the bottle, Just attach to a magnetic metal surface OR use the lanyard to secure the bottle in an upright position to capture the brake fluid..
  • High Quality & Durable: Our brake bleeder kit is manufactured from durable oil resistant plastics with a flexible 12'' fluid tube and extra strong magnet..
  • For Use With All Brake Systems: Easy to use with all types of brake systems including cars, motorcycles, ATVs, dirt bikes, scooters,.
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

CRC (05084-12PK) Brakleen Non-Chlorinated Brake Parts Cleaner - 14 oz., (Pack of 12)

  • Low volatile organic compounds(VOC) formulation.
  • Formulated to remove brake fluid, grease, oil and other contaminants from brake linings and pads.
  • Applied on brake cylinders, brake drums, brake linings, brake shoes, calipers and clutch discs.
  • Comes in 14-ounce bottle includes 12 bottle per pack.
Check Stock

Motorcraft PM20 Brake Fluid

  • Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems.
  • Super DOT 4 offers safety against vapor lock, with excellent resistance to absorbing and retaining water, while providing superior corrosion resistance.
  • Pentosin Super DOT 4 brake fluid can be used in ALL vehicles that require DOT 4 fluid.
  • OE Reference Numbers: Audi/Volkswagen: B 000 700 A1, B 000 700 A3, B 000 700 A6.
  • BMW/Mini: 81 22 9 407 510, 81 22 9 407 511, 81 22 9 407 512, 81 22 9 407 513.
  • Mercedes-Benz: 000 989 08 07 10, 000 989 08 07 11, 000 989 08 07 19.
  • OE Reference Numbers (Continued): Porsche: 000 043 203 66, 000 043 203 67, 000 043 305 52.
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

TOOLGUY REPUBLIC Fluid Transfer Pump - Powered by an Air Ratchet or Cordless Drill

  • Can be powered by an air ratchet or cordless drill. Universal adaptor with rubber mounting strap allows all drill sizes to be quickly mounted to pump.
  • Specifically designed for differential or transmission service. One hand operation leaves free hand to manage suction and discharge hoses.
  • Quickly fill or drain fluids: Brake fluid, Power steering fluid, Transmission fluid, Engine oil, Coolant, Gear/Differential oils.
  • Quick couple fittings allow: Easy hose changes, No drip storage of pump. Positive priming.
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock