Reviews Brake Fluid Change Tool

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

  • Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
  • Easy to Operate: The pneumatic way for higher speed of oil change.
  • just need to connect with air compressor. Easy to do the oil / fluid changing for....
  • Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
  • Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
  • Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

OEMTOOLS 25443 Extraction and Filling Pump, Brake Fluid Vacuum Pump Tool for Power Steering and Brake Fluid Reservoir, Garage & Shop Fluid Evacuators

  • SIMPLE BRAKE FLUID EXTRACTOR: Leave the turkey baster in the kitchen and easily extract automotive fluid in moments.
  • The plunger seal draws fluid out of the reservoir smoothly, eliminating messes with one manual fluid transfer pump.
  • FULL DISCLOSURE: Dual scale molded into the body of the fluid evacuator to measure liquid in quarts and milliliters.
  • Clear durable plastic body makes it easy to see how much fluid the syringe extractor collects as well as quality and condition.
  • LOW MAINTENANCE: The body of the fluid transfer pump disassembles into its components, making it easy to clean the cylinder, change the gaskets on the plunger, or otherwise service your fluid pump automotive tool.
  • REACH ANY RESERVOIR: Fluid evacuator pump comes with two connecting tubes that can extend the length of the brake fluid extractor pump from 11” all the way to 26”, so you can access any hard-to-reach filler neck or reservoir.
  • PRODUCT DETAILS: Maximum fluid extractor automotive capacity reaches 200 mL.
  • Includes (2) 7.5” car fluid pump extension tubes with cap locks.
Check Stock

KHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid

  • CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
  • MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
  • EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
  • PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. (1 AAA battery needed for use, not included in the Pack).
  • QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check Stock

Phoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Phoenix Systems (3006-B) Brake Fluid Test Strip Kit, 100 Test Strips and 100 Rating Cards, BrakeStrip, FASCAR

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock