Reviews Brake Fluid Change Kit

Phoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

Phoenix Systems (3006-B) Brake Fluid Test Strip Kit, 100 Test Strips and 100 Rating Cards, BrakeStrip, FASCAR

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

  • RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
  • Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
  • NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
  • The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
  • ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
  • Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
  • DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
  • Bleed brakes while keeping everything clean of caustic brake fluid.
  • Our handy reservoir makes disposal of brake fluid quick and easy.
  • FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
  • The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check Stock

NEXPEAK Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool …

  • Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or....
  • Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • 5 LED indicates you the test result and tells you brake fluid quality, it is convenient to know if the brake fluid is healthy or not..
  • Battery: 1 x AAA/1.5V (not included). When the green LED doesn’t light up, it means the battery has run out of power and need to replace a new....
  • Attention: wash the test probe with tab water after every use..
Check Stock

OEMTOOLS 25136 One Man Brake Bleeder & Vacuum Pump Test Kit Useful Tool for Automotive Tune-Ups Diagnosis & Testing One-Person Brake Bleeding

  • WIDE APPLICATION: This brake bleeder kit is ideal for a wide variety of automotive applications, including bleeding brake fluid and changing power....
  • VACUUM BRAKE BLEEDER: With the hand vacuum pump, there's no need to have an assistant in the car pressing the brake during brake bleeding.
  • SAFE BRAKE SYSTEM BLEEDING TOOLS: Our brake fluid bleeder kit is the safest, easiest way to bleed brakes without an assistant.
  • VERSATILE VACUUM BLEEDER: Works on any kind of vehicle with bleeding screws.
  • Great automotive and motorcycle brake bleeder kit.
  • Vacuum gauge scaled in inches and centimeters of mercury (Hg).
  • (2) lengths of brake bleeder hose (2 foot long 1/4 inch....
Check Stock

Taxutor 2pcs Brake Fluid Tester Pen Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • Check the health status of DOT3, DOT4 car brake fluid, dangerous if you do not change brake fluid timely.
  • 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
  • Easy to use simply power up, dip probes into brake fluid and read results,Only takes seconds to know the results.High quality electrical conductivity mental design, super strong ABS shell, small compact size, easy to carry in pocket.
  • Operated by a LR03 AAA 1.5V battery (not included), automatic shutdown after about 15 seconds of inactivity.
  • PLEASE NOTE: Please use clean water to clean after the test, otherwise the brake fluid may corrode the test pen.
Check Stock

Mission Automotive 16oz Brake Bleeding Kit - Easy Use One Person Brake Fluid Bleeder with Magnet Mount and Hanging Lanyard - for Car and Motorcycles Brake Systems 16oz Fluid Capacity

  • Brake Bleeding Made Easy! Our brake bleeder kit has been designed to make brake maintenance as easy as possible and help you get the job done from your garage without making excess mess..
  • How It Works: It couldn't be easier to use! Just attach the valve on out 12" brake bleeder hose to your brake system open the valve and pump a few times on the brake until the fluid hose is full with no air bubbles.
  • Includes Magnet Mount And Hanging Lanyard: No need to hold the bottle, Just attach to a magnetic metal surface OR use the lanyard to secure the bottle in an upright position to capture the brake fluid..
  • High Quality & Durable: Our brake bleeder kit is manufactured from durable oil resistant plastics with a flexible 12'' fluid tube and extra strong magnet..
  • For Use With All Brake Systems: Easy to use with all types of brake systems including cars, motorcycles, ATVs, dirt bikes, scooters,.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock