Reviews Brake Drum Wheel Hub

XUANYUDG0769 Golf Cart Brake Drum Hub Assembly for EZGO TXT PDS 1982-up Electric Cart (Not Fit Gas Models), Replace OEM# 19186G1P, Include Nut and Flat Washer, 2 Pack

  • 【Applicable Models】Golf cart brake drum hub assembly fits perfectly 1982-up EZGO Electric Vehicles, not suitable for gas models. This brake drum/hub assembly replaces Part# 19186G1P.
  • 【Durable Quality】It has a 3/4-Inch center hole with a 24-tooth star spline instead of the straight key. When replacing this brake drum, check the Hub assembly as well..
  • 【Warm Tips】Hub spline and Rear Axle Shaft Spline should be matched tightly. If one of them is wear out, both of them should be replaced at the same time, otherwise the hub spline will strip soon..
  • 【Package Included】2X EZGO TXT drum brake, 8X chrome lug nuts, 4X flat washer and 2X bolt pin, 1X instruction.
  • 【Customer Service】 XUANYUDG0769 is a professional manufacturer for golf cart accessories. We’re committed to providing excellent quality products for global customers. If you have any question about installation or any other questions, please contact us via amazon. We will provide 24-hours online service..
Check Stock

KIE Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that resists rust and corrosion..
Check Stock

Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check Stock

TSI Back Buddy II Hub and Drum Tool, Model Number 350b

  • Handles all hub and drum assemblies with included universal receiver and adapter sets.
  • Rolls under and bolts to brake drum and hub, then rolls away.
  • Ratchet lift and tilt control for easy alignment and positioning.
  • Transforms in seconds from inboard hub/drum lift to outboard drum or spoke lift device.
Check Stock

WINMAX TOOLS AUTOMOTIVE Axle & Front Wheel Hub Puller – Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler (Type Hexagon)

  • EASY BRAKE & BEARING REPAIR: The WINMAX Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance.
  • WORKS ON YOUR VEHICLE: Compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs.
  • VARIOUS APPLICATIONS: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles.
  • BUILT TO LAST: Heated pressure screw holds up to tough use.
  • Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion.
  • PERFECT SIZE: Yoke and bolt PERFECT SIZE: Yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applicationsare threaded 5/8-inch x 18 inches to best suit most vehicle applications.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

MOSNAI 0.75 Inch 24 Splines Hole Golf Cart EZGO TXT Brake Drum Hub Assembly for 1982-up Electric & 1982-1993 2-Cycle Gas Golf Cart, Replace OEM# 19186G1 19186G1P 17082G2 17298G1, 1-Pack with Nuts

  • ✅【Fit Models】EZGO brake hub fit 1982-up electric golf cart and 1982-1993 2-cycle gas golf cart. Not fit 4 cycle gas EZGO golf cart..
  • ✅【Product Feature】There is a 3/4-Inch center hole with a 24-tooth star spline, the hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer..
  • ✅【Replace OEM Part】This EZGO TXT rear brake drum/hub is a replacement for the earlier hub & drum and has the star spline instead of the straight key.Replace OEM# 19186G1, 19186G1P, 17082G2, 17298G1..
  • ✅【Note】 This EZGO TXT drum brake will NOT operate with a keyed axle/hub interface. Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon..
  • ✅【Package Content】1*EZGO rear hub with drum washer, 4* chrome lug nuts. Any problem please feel free to contact us, we are there for YOU !.
Check Stock

LUORNG 2PCS 135mm Mountain Bike Bicycle Flywheel Guard Bike Rear Wheel Spoke Protector Cassette Spoke Protector Freewheel Spoke Protector

  • Function: the flywheel guard plate is used to protect the steel wire installed in the flywheel of the rear wheel..
  • Size: Outer diameter 135mm/5.31in, suitable for cassette hubs with hub lugs diameter of 54mm/2.13in. The three-claw guard can also fit the cassette V-brake hub, but the actual use depends on the diameter of the hub lug..
  • High performance: the three claw design can firmly fix the hub, and the hub is not easy to fall off..
  • Easy to use: it is installed in the flywheel of the rear wheel to protect the steel wire, prevent the chain from falling onto the back of the flywheel and reduce the sediment thrown onto the flywheel..
  • Package content: 2 pieces of clip type three claw bicycle flywheel spoke protector. Be sure to check the data before purchasing. The diameter of flower drum ear piece is 54mm / 2.13in..
Check Stock

OCPTY Trailer Hub Brake Drum 10 x 2-1/4 Wheel Bearing Kits For 1-1/16 Outer 1-3/8 Inner 5 Bolt Lug For 3,500 lb. Axles Tapered Spindle Grease Seal

  • This hub bearing is meticulously manufactured and easy-installation designed, which can bring you a convenient and fantastic using experience.
  • Black 10 x 2-1/4 trailer brake drum kit. Bolt pattern is 5 on 4.5.
  • 1 pack Trailer Brake Drum Hub kit For 1 year after-sale warranty.
  • Complete assembly with hub, bearings, seal, cap, Lug Nuts and cotter pin.
Check Stock

Trailer 6 on 5.5' B.C. Hub Drum Kits with 12'x2' Electric Brakes for 5200-6000 Lbs Axle

  • 2x Trailer 6 on 5.5" B.C. hub drum Kits + 2x 12"x2" electric brakes for 5200-6000 Lbs Axle. Bolt pattern: 6 on 5.5".
  • Kit also include: 2x 25580 inner cone bearings and 2x 15123 outer cone bearings, 2x Grease seals 2.25" x 3.371", 2x EZ lube grease caps with rubber plug, 12 cone wheel nuts 1/2"x20 thread,.
  • Also include: One right and one left self adjusted 12" x 2" electric brakes with 3-1/4" center hole.
  • ref brake part #. K23-180-00, K23-181-00.
Check Stock