Reviews Brake Caliper Hardware Kit

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • ...only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting installs in place of the straight fitting in the caliper to allow smoother, neater plumbing with less chance of kinking 90 Degree compression hose end 1/8" NPT Female to -3 Nylon hose..
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • ...e Kit With 12" Rotors And Red Calipers (Wilwood Part #140-12306-R Front And # 140-7140-R Rear)..
  • *Front brake kit includes.810" thick x 12.19" O.D. rotors, Red Dynalite 4 piston calipers, caliper mounting brackets, BP-10 brake pads, hubs, bearings, seals and hardware. *Rear brake kit includes .810" thick x 12.19" O.D. rotors with hats, Red Dynalite 4 piston calipers, drum parking brake assemblies with caliper mounting brackets, bearing retainers, BP-10 brake pads, and hardware..
  • *Front & Rear Flexline Kits with steel braided brake lines, caliper fittings, & chassis fittings to connect the calipers to the hard lines *Rear Hard Line Kit with steel hard brake line tubing to connect the chassis fittings to the included rubber hose, which connects those hard lines to the line on the frame *Rear Parking Brake Cable Kit, which connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission.
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • ...-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
  • Front and Rear Flexline Kits | Rear Hard Line Kit | Rear Parking Brake Cable Kit | Southwest Speed Chrome Power Brake Booster (SWS Part # 300-7975) | Wilwood Polished Master Cylinder and Proportioning Valve Set (Part # 261-13270-P) 003e Polished Tandem Chamber Master Cylinder 003e 1 1/8" Bore cylinder 003e Stainless Steel Fluid Tubes 003e Mounting Bracket 003e Stainless Steel Button Head Bolts | Southwest Speed Tubular Upper and Lower Control Arms (SWS Part # 101-9172 Upper and # 101-9374 Lower).
Check Stock

R1 Concepts Front Rear Brakes and Rotors Kit |Front Rear Brake Pads| Brake Rotors and Pads| Ceramic Brake Pads and Rotors |Hardware Kit - CEB.51032.02

  • All-in-One Complete Brake Kit Replacement: eLine Series Front & Rear Brake Kit comes with (4) high performance brake rotors, (8) low-dust ceramic brake pads, and disc brake hardware kits..
  • OEM Specifications: Formulated with G3000/G11H18 cast iron specification, these premium brake rotors are engineered to match OEM specifications for durability, reliability, and stability..
  • Non-Directional Finish - Each rotor is prepared with a non-directional finish to promote a faster and more even disc brake pad bed-in, along with quieter and smoother stops for longer lasting, consistent braking performance..
  • Low Dust & Noise: Brake pads come with shims and hardware to eliminate noise. Low dust, asbestos free special ceramic formulation provides excellent fade resistance. Top choice for front and rear brake pads replacement..
  • Hardware Kit Included: Often overlooked during a brake repair, the disc brake hardware can be stressed, fatigued, or corroded within 1-2 years, which leads to a reduction in spring tension, excessive caliper movement, premature/uneven wear, and noise..
Check Stock

R1 Concepts Front Rear Brakes and Rotors Kit |Front Rear Brake Pads| Brake Rotors and Pads| Ceramic Brake Pads and Rotors |Hardware Kit|fits 2017-2021 Chrysler Pacifica, 2020-2021 Chrysler Voyager

  • All-in-One Complete Brake Kit Replacement: eLine Series Front & Rear Brake Kit comes with (4) high performance brake rotors and (8) low-dust ceramic brake pads, and hardware kit.
  • High Performance Brake Rotors: Made of G3000 grade cast iron with zinc finish for ultimate rust protection. Built with O.E.M specifications in mind, no modification required..
  • Ultimate Stopping Power: Precision-drilled holes and countersunk design prevents cracking and build up, enhances ventilation and dissipates heat. Designed for smoother and quieter stopping, built for longer lasting, consistent braking performance..
  • Low Dust & Noise: Brake pads come with shims and hardware to eliminate noise. Low dust, asbestos free special ceramic formulation provides excellent fade resistance. Top choice for front and rear brake pads replacement..
  • Hardware Kit Included: Often overlooked during a brake repair, the disc brake hardware can be stressed, fatigued, or corroded within 1-2 years, which leads to a reduction in spring tension, excessive caliper movement, premature/uneven wear, and noise..
Check Stock

Rear Atv Brake Caliper For Polaris Sportsman 400 500 600 700 800 With Pads Replace 1911075,Brand New rear brake caliper

  • Fit the polaris model : 2003-2005 Sportsman 400, 2006-2007 Sportsman 450, 2003-2006 Sportsman 500, 2007-2009 Sportsman 500 ( Fits the HO & EFI, but will not fit the X2 EFI ).
  • 2003-2005 Sportsman 600, 2002-2006 Sportsman 700, 2007 Sportsman 700 MV/EFI, 2010 Sportsman 700 Military, 2005-2009 Sportsman 800 4×4, 2005-2014 Sportsman 800 6×6.
  • Package included: 1x Brake Caliper，Brand New aftermarket rear brake caliper，Mounting Hole Spacing(center-to-center): 65mm(2.56″), Mounting Hole Size: Fits for 8mm Bolt.
  • OE: 1910690,1911075，A new rear brake caliper, coming with brake pads..
  • The items are the same as the pictures.fits for:polari sportsman,polaris sportsman rear brake caliper,balatas para polaris sportsman 400 4/4,05 polaris sportsman brake rear, polaris eh500ple080 brake caliper ,08 polaris sportsman rear brake caliper seal kit ,2011 polaris sportsman rear brake caliper ,2007 polaris sportsman 500 brake caliper ,tao tao 150 4 wheeler rear brake caliper.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

G2 High Temperature Brake Caliper Paint Kit - High Gloss, Wear and Heat Resistant, Epoxy Paint System - Dries Hard, No Flaking or Fading Lime Green G2171

  • HEAT AND WEAR RESISTANT - G2 brake caliper epoxy paints are able to resist heat up to 980 degrees! Our epoxy paint system creates an extremely tough, durable, protective layer that is easy to maintain.
  • EXTREME DURABILITY - G2 epoxy brake caliper paint system offers great chemical and physical protection against brake fluids, road salt, dust, dirt, gravel or discoloration.
  • HIGH GLOSS FINISH- This professional paint kit adds a great stylish touch to any brake caliper. This brush on system has advantages over spray- type paint as it dries harder and does not flake and chip.
  • 12 STANDARD COLORS- G2 brake epoxy paint kit comes in 12 different high gloss, heat resistant colors including red, yellow, silver, blue, purple, black, green, white, gold, orange , pink and lime green. Colors for every style!.
  • 100% MADE IN USA- Our Paint Kits are made and manufactured in the USA. Each complete kit covers 4 disc brake calipers or 2 drums and contains an instructions manual, 1 aerosol brake caliper cleaner, 1 metal can of high temp epoxy brake caliper paint, stirrer, applica....
Check Stock

WEERAS BMX Rear Alloy Rim Brake Set Rim Brake Caliper Set

  • 【Package Contents】:rim brake caliper x 1,brake lever x 1,brake cable x 1,brake kit includes all necessary hardware.
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock