Reviews Braid Hose

AES Industries AES 855 Heavy Duty Air Hose Ferrule Crimping Tool with 5 Dies (1/4\ Single Braid thru 3/8\ Double Braid Hose)

  • Crimps brass or aluminum ferrules on 1/4" single braid hose thru 3/8" two braid hose..
Check Stock

DOZYANT 10 Feet Braided Propane Hose Adapter 1lb to 20lb for Coleman Camp Stove, Buddy Heater to LP Cylinder POL Connection

  • It connects 1lb portable appliance to 5lb-100lb LP tank. Not have to change out expensive little 16.4 oz tank constantly, saving money.
  • For use with Coleman Stove, Buddy Heater, Portable grill or outdoor stove and other small appliances..
  • The added protection of the steel braid around the hose, effectively protected from abrasions and animals chew, holds up much better and longer when exposed to the sun and weather.
  • Long-lasting braid and 100% solid brass to provide a secure and sealed connection between applications and tanks..
  • For the original hose, this hose has been upgraded and be more durable. It's worth the price and more favorable than the original.so you can buy it with confidence..
Check Stock

GYLBF 50ft x 1/4" Upgraded Airless Paint Sprayer Hose Sprayers, Airless Paint Hose Made of Four Layers of Quality Materials, Contains Encrypted Steel Wire Layer

  • ...le spraying under pressure. Suitable for most common architectural paints and solvent-based coatings..
  • 【Hose Material】The airless paint sprayer hose is made of four layers of high-quality materials. The first layer is the nylon inner tube layer, the second is the fiber braid layer, the third is the steel wire braid layer, and the outermost is the PU wear layer. Can withstand aging, high pressure, corrosion, and anti-burst. More durable than other brands..
  • 【Bending Performance】The airless paint sprayer hose has good flexibility and easy bending. The tube body is tightly combined, which improves the usability of spray under pressure..
  • 【Durability】The paint sprayer hose is 50ft long, extending the reach of your sprayer for peaks or second stories without diminishing performance. The tube is light and easy to carry, with low fluid resistance and small volume expansion, which does not affect the working pressure..
  • 【High safety factor】Maximum working pressure is 4300 psi and 1/4" female swivel-nut connections with spring guards on both ends. With a conductive interla....
Check Stock

M MINGLE High Pressure Washer Hose Reel 100ft, Pressure Washer Jumper Hose

  • Hose Reel for Pressure Washer: 100 feet capacity power wash hose reel (NOT INCLUDE 100FT HOSE) is constructed of heavy gauge industrial steel frame, corrosion resistant powder coating, a full flow solid swivel joint hose inlet connection protecting against leaks. Solid stainless steel metal construction for excellent durability..
  • Hand Crank Hose Reel: Direct handcrank rewind designed pressure washing hose reel with swivel and smooth round handle, easy to put away your power washer hose. Brass swivel and internal stainless-steel stem prevents power hose tangling and resists rust and corrosion. Pressure washer 90 degree elbow preserves hose lifespan and protects from kinks and bend damage..
  • Quality Material: The pressure washer whip hose is made of upgraded high tensile steel-wire braid, more durable.pressure washer hose whip is non marking and never kink permanently. Easy to carry, drag and roll up..
  • Widely Compatibility: The pressure washer hose reel connector has 3/8" quick connect female socket and 3/8" plug. Fit most pressure washer and pressure washer hose reel. Easy to connect and disconnect..
  • Premium Service: M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any question.
Check Stock

Ultimate Washer Portable Hose Reel Cart with M15-5 Hose Reel (350 FT x 3/8\ Capacity)

  • Hose Reel for Pressure Washer: 100 feet capacity power wash hose reel (NOT INCLUDE 100FT HOSE) is constructed of heavy gauge industrial steel frame, corrosion resistant powder coating, a full flow solid swivel joint hose inlet connection protecting against leaks. Solid stainless steel metal construction for excellent durability..
  • Hand Crank Hose Reel: Direct handcrank rewind designed pressure washing hose reel with swivel and smooth round handle, easy to put away your power washer hose. Brass swivel and internal stainless-steel stem prevents power hose tangling and resists rust and corrosion. Pressure washer 90 degree elbow preserves hose lifespan and protects from kinks and bend damage..
  • Quality Material: The pressure washer whip hose is made of upgraded high tensile steel-wire braid, more durable.pressure washer hose whip is non marking and never kink permanently. Easy to carry, drag and roll up..
  • Widely Compatibility: The pressure washer hose reel connector has 3/8" quick connect female socket and 3/8" plug. Fit most pressure washer and pressure washer hose reel. Easy to connect and disconnect..
  • Premium Service: M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any question.
Check Stock

Apache 10085574 4000 PSI 3/8' x 50' Rubber Pressure Washer Hose Assembly with Quick Disconnect Fittings,Black

  • Use this hose for hot and cold water applications where heavy-duty, high pressure cleaning equipment is required.
  • Constructed with high-tensile steel, two wire braid hose with two bend restrictors.
  • Laboratory tested for normal service from -4 to 210 degrees F.
Check Stock

SIMPSON Cleaning MorFlex 40224- 1/4"x 25' 3200 PSI Cold Water Replacement/ Extension Hose

  • Lightweight polyester braid for easy handling.
  • Designed to fit most gas pressure washers w/ standard threaded fittings.
  • 1/4″ x 25′ 3100 PSI replacement/extension hose.
  • MorFlexTM technology for high flexibility and kink resistance.
  • Equipped with M22 fittings with dual o-ring design to fit both 14mm and 15mm connections.
  • Polyurethane outer jacket is non-marring and abrasion resistant.
  • Original hose replacement or an extension of an existing hose.
Check Stock

GYLBF Airless Paint Spray Hose Kit, Including 50ft Upgraded Airless Paint Hose, Airless Paint Sprayer Gun, 8” Extension Pole, Tip Guard and 517 Tip, 1/4" Swivel Joint, 3600 PSI

  • ...r pressure. Suitable for most common architectural paints and solvent-based coatings..
  • 【50 ft x 1/4 in Universal Hose】The airless paint sprayer hose is made of four layers of high-quality materials. The first layer is the nylon inner tube layer, the second is the fiber braid layer, the third is the steel wire braid layer, and the outermost is the PU wear layer. Can withstand aging, high pressure, corrosion, and anti-burst. More durable than other brands..
  • 【Paint Spray Gun Material】The airless paint spray gun is made of high-quality aluminum alloy, strong wear resistance, rust-resistant, sturdy and durable. High degree atomizing paint, spray width 10inch. Easily cope with various working environments..
  • 【517 Sprayer Tip with Nozzle Seal】The reversible airless spray tip consists of a 304 stainless steel handle and tungsten carbide orifice, the tip seal is made of stainless steel tip gasket and nylon. The Guard nozzle seat is made of quality metal and plastic. Corrosion resistance, good abrasion resistance, high precision, saving more than 30% of paint than the same product..
Check Stock

RIDGID 37413 KJ-3100 Water Jetter

  • This item is used for Pneumatics ,Pneumatic Fasteners & Accessories.
  • This product manufacture by United States.
  • Working Pressure of 3000 psi and Flow of 5.5 GPM.
  • Hose with Nylon Braid Provides Significant Weight Reduction and Increased Flexibility, All Without Reducing Strength.
Check Stock

Tool Daily Pressure Washer Hose, 3/8 Inch x 50 FT, Quick Connect, 4000 PSI, High Tensile Wire Braided

  • Pressure washer hose 50 FT is made from upgraded high tensile Steel-Wire Braid, Scuff and mark resistant construction for prolonged service life. No leaking..
  • Max Working Pressure is up to 4000 PSI. Burst Pressure is up to 16000 PSI. Flow rate is from 2.5 GPM to 5 GPM. Max Temperature is up to 176 F..
  • Power washer hose extension fits most pressure washer models. The 3/8 pressure washer hose has 3/8" quick connect female socket and 3/8" plug. Easy to connect and disconnect..
  • Pressure washer hoses is 50 FT X 3/8 Inch. Bend radius of the hose is 4.7 inch..
  • Application: 4000 PSI pressure washer hose is used for residential and commercial washing, such as washing car, floors, motorcycle, windows, siding, driveways, and roofs..
Check Stock