Reviews Bracing Cable

Kanto SUB6GB Powered Subwoofer (Gloss Black)

  • HOME THEATER POWERED SUBWOOFER - Standard RCA inputs easily connect to your home theater receivers dedicated Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature.
  • 600 WATTS PEAK POWER - Integrated high efficiency power amplifier, 22 - 250 Hz with 99dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs.
  • 15 INCH DOWN FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish.
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with dual or single RCA dedicated Subwoofer passive output, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
  • WHAT'S IN THE BOX - Acoustic Audio by PSW-15 powered subwoofer, 6 foot dual RCA cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 14.6" × 16.5" × 18.5" - NOT LFE Compatible.
  • Included components: 1 Powered Subwoofer Speaker, 1 Dual RCA 6 Foot Cable, 1 RCA "Y" Adapter, Instruction Manual.
Check Stock

National Hardware N192-211 852 Anti-Sag Gate Kits in Zinc,Pack of 1

  • Authorized Replacement for Stanley Hardware Stock #S760-828.
  • Kit includes: top and bottom corner bracket, rope clips, cable, turnbuckle and mounting screws.
  • Instructions included to make installation easy.
  • Plated for extra wather protection and tested to withstand the most extreme weather conditions.
  • Anti-sag gate kit in Zinc plated is designed to help reduce gate sag.
  • All steel parts are Zinc plated to resist rust.
  • Instructions make installation of kit components easy.
Check Stock

Acoustic Audio PSW-12 500 Watt 12-Inch Down Firing Powered Subwoofer (Black)

  • HOME THEATER POWERED SUBWOOFER - Standard RCA inputs easily connect to your home theater receivers dedicated Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature.
  • 500 WATTS PEAK POWER - Integrated high efficiency power amplifier, 24 - 250 Hz with 98dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs.
  • 12 INCH DOWN FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish.
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with dual or single RCA dedicated Subwoofer passive output, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
  • WHAT'S IN THE BOX - Acoustic Audio by PSW-12 powered subwoofer, 6 foot dual RCA cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 13.8" × 13.4" × 14.6" - NOT LFE Compatible.
  • Included components: 1 Powered Subwoofer Speaker, 1 Dual RCA 6 Foot Cable, 1 RCA "Y" Adapter, Instruction Manual.
Check Stock

Qualcraft Ultra Jack Brace #2002Q

  • Used to secure Aluminum Poles to the work wall..
  • Provides rigid, triangular bracing as required by OSHA..
  • Full swivel head to accommodate all roof pitches..
  • These provide rigid, triangular bracing as required by OSHA..
Check Stock

Cordoba C3M Classical Guitar

  • BEGINNER-FRIENDLY NYLON STRINGS: Lightweight and comfortable to play, nylon strings are much softer than steel strings, ideal for beginners.
  • FULL SIZE GUITAR: One of the most popular models and a staple in Córdoba’s Iberia Series lineup, the C3M is a full-sized, handcrafted guitar. Built with a solid cedar top (choice top wood for classical guitars) and mahogany back and sides.
  • TRADITIONAL SPANISH FAN BRACING: Fan bracing is preferred for classical guitars over lattice bracing, as it allows the guitar's top to vibrate more freely and provides a warmer and evenly balanced tone.
  • HIGH QUALITY FEATURES: The C3M also has a hand inlaid wooden rosette, a rosewood fingerboard, and gold tuning machines with pearl buttons. The "M" in the title stands for its light matte finish.
  • LEARN AT YOUR OWN PACE: There's never been a better time to dive deep into the joy of music and hone your technique. With the Córdoba Live. Play. Learn. Series, you're one step closer to mastering all your favorite songs. Córdoba, alongside Evan Taucher, brings you a methodical and systematic approach to the art of the nylon string guitar. For more information, please visit the Cordoba website..
Check Stock

KICKER CompR 12'(30cm) Dual subwoofers in Vented encl, 2ohm, RoHS Compliant

  • SoloKon Cone System with Vented Back Bracing and Motor Cooling.
  • Extensive Internal Bracing and Thick MDF Construction.
  • Features the Best-in-Class CompVR Subwoofer.
  • Factory-Tuned Enclosure for Incredible Bass.
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ...,000 cubic feet in size, with a 10‑12 foot viewing distance from the screen..
  • 12" Woofer: The Monolith 12" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear m....
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ...,000 cubic feet in size, with a 10‑12 foot viewing distance from the screen..
  • 10" Woofer: The Monolith 10" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with a single port that can utilize a foam plug to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you h....
Check Stock

KICKER CompR 12"(30cm) Dual subwoofers in Vented encl, 2ohm, RoHS Compliant (Renewed)

  • SoloKon Cone System with Vented Back Bracing and Motor Cooling.
  • Extensive Internal Bracing and Thick MDF Construction.
  • Features the Best-in-Class CompVR Subwoofer.
  • Factory-Tuned Enclosure for Incredible Bass.
Check Stock

Monolith M-15 V2 15in THX Certified Ultra 1000 Watt Subwoofer Amplifier, Low Distortion, High Power Output, Vented HDF Cabinet

  • ... 3,000 cubic feet in size, with a 10 12 foot viewing distance from the screen..
  • 15" Woofer: The Monolith 15" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with three ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 1000 Watt Amplifier: The 1000W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 6 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you he....
Check Stock