Reviews Bowden Tube Cutter

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality..
  • LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping..
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!.
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD 1.5 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

Creality Official Capricorn Bowden PTFE Tubing Teflon Tube XS Series 1 Meter for 1.75mm Filament with Mold Spring,Pipe Cutter,M6 M8 Pneumatic Joint for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

Capricorn XS Series Teflon Tube Bowden PTFE Tubing 3 Meters with 4Pcs PC4-M6 4Pcs PC4-M10 Fittings and PTFE Tube Cutter for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1.75mm Filament

  • 【Creality Capricorn Tube】----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary....
  • 【Lower Friction】----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for....
  • 【High Temperature Resistant】----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher....
  • 【Upgrade Your 3D Printer】----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series....
  • 【Wide Compatible】----Creality Capricorn Bowden PTFE Tubing Tube XS Series 3 Meters 1.75MM Filament For Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S....
Check Stock

Ted Lele 8Meters 26.2Ft 4mm OD 2mm With Tube cutter PTFE Teflon Bowden Tube for (white) (8M)

  • Package Content : 1pc PTFE Teflon Bowden Tube.
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • 100% Genuine Capricorn XS Bowden TubingCapricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • Less FrictionHigh Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(bla....
Check Stock

Creal Genuine Capricorn Tubing 1 Meter XS Series 1.75MM Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3Pro Ender 5 CR-1010S 3D Printer

  • ( Bowden Tubing)100 percent Genuine Capricorn Bowden PTFE Tubing..
  • (High Temperature Resistant) High Temperature Resistance due to using only the highest quality Capricorn PTFE. Our tubing will operate at even higher....
  • (Lower Friction) High lubricity additives make XS Series Capricorn tubing the lowest friction bowden on the market. It developed specifically for....
  • (Professional accessories)PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and....
  • (Upgrade Your 3D Printer)-- Premium XS Capricorn bowden Tubing is officially authorized and d quality.Using Original XS Series tubing make less....
Check Stock

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

  • Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
  • The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
  • Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....
Check Stock

Genuine Capricorn Premium Bowden Tubing XS Series Bowden Tubing for 1.75mm Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1 Meter

  • Creality Capricorn Tube----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives..
  • Lower Friction----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for 1.75mm filament with an extremely precise internal diameter.The inside diameter of bowden liner is one of the critical feature for the successful print..
  • High Temperature Resistant----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.The maximum operating temperature up to 280!.
  • Upgrade Your 3D Printer----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series tubing make less friction and more responsiveness,means you can save more time.It's really a great way to upgrade your 3D printer with a reasonable prices!.
  • Brass Pneumatic Connector----The PC4-M6 and PC4-M10 pneumatic connector is made of brasss, with small metal teeth,which can tightly coupled.Therefore, it's never leakaged filament during printing..
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock