Reviews Bowden Cable

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD 1.5 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

Knipex 95 62 190 T Wire Rope Cutters 7,48\ with tether attachment point

  • With two crimping Dies for end caps on Bowden Cable sheaths and end ferrules for traction cables.
  • Pliers with tether attachment point for mounting a fall protection.
Check Stock

Creal Genuine Capricorn Tubing 1 Meter XS Series 1.75MM Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3Pro Ender 5 CR-1010S 3D Printer

  • ( Bowden Tubing)100 percent Genuine Capricorn Bowden PTFE Tubing..
  • (High Temperature Resistant) High Temperature Resistance due to using only the highest quality Capricorn PTFE. Our tubing will operate at even higher....
  • (Lower Friction) High lubricity additives make XS Series Capricorn tubing the lowest friction bowden on the market. It developed specifically for....
  • (Professional accessories)PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and....
  • (Upgrade Your 3D Printer)-- Premium XS Capricorn bowden Tubing is officially authorized and d quality.Using Original XS Series tubing make less....
Check Stock

Creality Official Capricorn Bowden PTFE Tubing Teflon Tube XS Series 1 Meter for 1.75mm Filament with Mold Spring,Pipe Cutter,M6 M8 Pneumatic Joint for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/ Ender 3 V2

  • Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance..
Check Stock

Capricorn XS Series Teflon Tube Bowden PTFE Tubing 3 Meters with 4Pcs PC4-M6 4Pcs PC4-M10 Fittings and PTFE Tube Cutter for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1.75mm Filament

  • 【Creality Capricorn Tube】----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary....
  • 【Lower Friction】----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for....
  • 【High Temperature Resistant】----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher....
  • 【Upgrade Your 3D Printer】----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series....
  • 【Wide Compatible】----Creality Capricorn Bowden PTFE Tubing Tube XS Series 3 Meters 1.75MM Filament For Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S....
Check Stock

BCZAMD V6 Heat Sink 1.75mm for 3D Extruder Head Hotend J-Head DIY Kit Remote Built-in Bowdn Tube Connector with Collet Clip

  • Use for E V6 extruder hotend, 1.75mm filament.
  • The 1.75mm universal v6 HeatSink has been designed to use unique embedded bowden couplings which makes the bowden so compact that we merged bowden and....
  • After-sales guarantee: Each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try....
Check Stock

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

Genuine Capricorn Premium Bowden Tubing XS Series Bowden Tubing for 1.75mm Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1 Meter

  • Creality Capricorn Tube----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives..
  • Lower Friction----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for 1.75mm filament with an extremely precise internal diameter.The inside diameter of bowden liner is one of the critical feature for the successful print..
  • High Temperature Resistant----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.The maximum operating temperature up to 280!.
  • Upgrade Your 3D Printer----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series tubing make less friction and more responsiveness,means you can save more time.It's really a great way to upgrade your 3D printer with a reasonable prices!.
  • Brass Pneumatic Connector----The PC4-M6 and PC4-M10 pneumatic connector is made of brasss, with small metal teeth,which can tightly coupled.Therefore, it's never leakaged filament during printing..
Check Stock

2 Meters Capricorn Bowden PTFE Tubing XS Series Low Friction for 1.75mm Filament PTFE Teflon Tube Cutter Pneumatic Fittings Silicone Socks and Nozzles for Ender 3/3 Pro/5/5 Pro/ 5 Plus 3D Printer

  • Original Authentic: 100% Original Capricorn XS Series Bowden tubing. High Lubricity Additives make our XS Series tubing the lowest friction Bowden....
  • Precise Print: Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less....
  • Excellent Performance: Capricorn Bowden tubing is designed specifically for 1.75mm filament, the filament is loaded smoothly to the hotend with as....
  • With accessories: PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions....
  • What You Get: 1*2 Meters PTFE Tube, 3*0.4MM Nozzle, 3*Sillicone Cover, 1*Big Fitting, 1* Small Fitting, 1* Tube Cutter. If you have any unsolvable....
Check Stock