Reviews Boring Bar For Manual Cutting

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock