Reviews Boring Bar Coolant Flow Control Valve

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...be to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneuma....
Check Stock

Gates 33008S 180f/82c Thermostat

  • 180 Degree Superstat (2-1/8″ x 29/32″ x 29/32″).
  • Opens against the flow of coolant from the water pump.
  • The coolant, under water pump pressure, is used to help the reverse poppet thermostat stay closed when cool to reduce leakage.
  • The offset thermostat with jiggle pin valves is equipped with a special valve in the flange.
Check Stock

Trail Tech 732-FN11 TTV Temperature Switching Yamaha Digital Fan Kit, 6 x 5 x 4-Inch

  • 【Fitment】Coolant Control Valve specially designed for Toyota Prius 20042009, perfect fit with the original, can be used directly..
  • 【OEM number】According to the original OEM specifications, OE 1667021010, perfect match..
  • 【Direct replacement】Original standard, wonderful replacement for the previous old or broken one..
  • 【Feature】Fine workmanship, wearresistance and corrosionresistance, the service life is longer..
  • 【Durable materials】Coolant Control Valve manufactured from premium ABS material, durable and sturdy, having stable performance..
Check Stock

Forwinparts 3 Way Heater Control Coolant Valve for 2015-2018 Dodge Ram 1500 3.6L 5.7L V6 V8 52014892AC

  • [Application] Heater Control Valve 3 Way Coolant Valve for 2015-2018 Dodge Ram 1500 3.6L 5.7L V6 V8..
  • [OEM No.] 52014892AC, 52014892AA, 52014892AB..
  • [Description] Package included 1 × 3 Way Heater Control Coolant Valve. 100% brand new and high quality. Perfect match for the original car. Easy to install. Not easy cracking. Stable characteristics. Advanced manufacturing technology, high reliability and high performance. Meet the quality standards, 100% tested before shipment. Made of high quality material, reliable quality and durable..
  • [Attention] Please check carefully whether the product is suitable for your car. If you have other questions, please feel free to contact me..
  • [Warranty] 6-month warranty. If you have any questions during the 6-month warranty period, please feel free to contact us for return or exchange..
Check Stock

Hydraulic Joystick Directional Control Monoblock Valve for Tractor Loader 2 Spool 11 GPM with Joystick

  • Max operating pressure: P = 3600psi (250 bar).
  • 2 spool hydraulic directional control valve. Release valve adjustable..
  • Durable cast iron construction provides long-term usage.
  • Compact design use in small tractors, tractors loaders, log splitters, etc..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ...ry of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration cap....
Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • ... good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
  • 【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, and made into a large diameter. Applicable media: water, oil, air.
  • widely used in food, pharmacy, beer beverage, biological engineering, m....
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

Sandvik Coromant A06M-SCLCL Round with Flats Shank Steel Boring Bar, 6\ Overall Length, 15/32\ Minimum Hole Diameter, 3/8\ Shank Diameter, 06 Insert Size (Pack of 1)

  • Bars for positive basic shape inserts 7 degree.
Check Stock

Tolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters

  • SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock