Reviews Bore Size

(8-Pack) Zinc Plated Carbon Steel 5/8” Bore Shaft Collars Sets - Screw Style Bore Shaft Collars with 5/8” Bore Size, 1-1/8 Outer Diameter, and 1/2 Width - Suitable for Automotive and Industrial Use

  • ZINC PLATED CARBON STEEL 5/8” BORE SHAFT COLLARS SETS - High-quality, fits well, and cheap. We provide you with the perfect balance between affordability and quality. If you are searching for parts that will last you for quite some time, our set of 8 bore shaft collars are manufactured to strict standards. Made from carbon steel, each bore shaft collar provides superior strength, and with the addition of zinc plating, it becomes corrosion-proof and more durable..
  • SCREW STYLE BORE SHAFT COLLARS WITH 5/8” BORE SIZE - Though the bore size is the most important fit consideration, you’ll also need to consider other components to ensure a perfect fit. Each of these bore shaft collars has an outer diameter of 1-1/8 inches, a 1/2 inch width (thickness), and a 5/16-18 inch clamp screw diameter..
  • SUITABLE FOR AUTOMOTIVE AND INDUSTRIAL USE - These are just two of the most common applications for these bore shaft collars. Common usage includes situating components in power steering assemblies, locating components on conveyor belt systems, and more. If you are unsure if these are the parts you need, remember that round bore shaft collars’ usual usage is as locators, spacers, stops, and bearing faces..
  • WIDE RANGE OF OPERATING TEMPERATURES - These round bore s....
Check Stock

(4-Pack) Zinc Plated Carbon Steel 5/8” Bore Shaft Collars Sets - Screw Style Bore Shaft Collars with 5/8” Bore Size, 1-1/8 Outer Diameter, and 1/2 Width - Suitable for Automotive and Industrial Use

  • ZINC PLATED CARBON STEEL 5/8” BORE SHAFT COLLARS SETS - High-quality, fits well, and cheap. We provide you with the perfect balance between affordability and quality. If you are searching for parts that will last you for quite some time, our set of 4 bore shaft collars are manufactured to strict standards. Made from carbon steel, each bore shaft collar provides superior strength, and with the addition of zinc plating, it becomes corrosion-proof and more durable..
  • SCREW STYLE BORE SHAFT COLLARS WITH 5/8” BORE SIZE - Though the bore size is the most important fit consideration, you’ll also need to consider other components to ensure a perfect fit. Each of these bore shaft collars has an outer diameter of 1-1/8 inches, a 1/2 inch width (thickness), and a 5/16-18 inch clamp screw diameter..
  • SUITABLE FOR AUTOMOTIVE AND INDUSTRIAL USE - These are just two of the most common applications for these bore shaft collars. Common usage includes situating components in power steering assemblies, locating components on conveyor belt systems, and more. If you are unsure if these are the parts you need, remember that round bore shaft collars’ usual usage is as locators, spacers, stops, and bearing faces..
  • WIDE RANGE OF OPERATING TEMPERATURES - These round bore s....
Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Tb Woods 5J12 Coupling

  • Item - Sleeve Coupling Flanges: Sleeve Coupling Flange.
Check Stock

Echo / Shindaiwa 43312312130 BAND, BRAKE

  • Manufacturer Description: S-450*28MM BORE,METRIC,NSB.
  • Maximum Brake Continuous Thermal Dissipation: 0.38 kW.
Check Stock

VLAOSCHI Red Alloy Aluminum Hub Centric Rings 78.1 to 108 - Performance Wheel Hubcentric Rings for 78.1mm Vehicle Hub with 108mm Center Bore Rims - Pack of 4

  • 【The Hub Centric Ring Advantage】Because the modified wheel hub for different brands of vehicles for use, most of the factory to increase the size of the center hole. In order to fit the wheel with the original car better, through the ring to reach the gap with the original car just a good gap, so will not loose the lug nuts of the vehicle hub to prevent 80KM-120KM produce steering wheel jitter situation..
  • 【Fine Workmanship Size Precision】These Hubrings are made of High Quality 6061 Aluminium Alloy, CNC Machined, Red Anodic Oxidation, nice looking and corrosion resistant, heat resistant and durable..
  • 【Hub Ring Inner Diameter】I.D : 78.1mm, must match Vehicle hub bore.
  • 【Hub Ring Outer Diameter】O.D : 108mm, must match wheel center bore.
  • 【Fitment】 Buyer is responsible for ordering the correct size. It is necessary that you measure your vehicle hub bore size and your wheel center bore before purchasing. If you are not 100% sure of your vehicle hub size, send us email and we will be happy to look it up for you. Just provide the Year, Make, Model of your vehicle..
Check Stock

Milton S-444 Valve Core Tool

  • One end for standard bore, one end for large bore valves.
  • Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skincard.
  • One end for standard bore, one end for large bore valves..
  • Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skin card.
Check Stock

15 inch Hubcaps Best for VW Volkswagen - (Set of 4) Wheel Covers 15in Hub Caps Silver Chrome Black Rim Cover - Car Accessories for 15 inch Wheels - Snap On Hubcap, Auto Tire Replacement Exterior Cap

  • 【The Hub Centric Ring Advantage】Because the modified wheel hub for different brands of vehicles for use, most of the factory to increase the size of the center hole. In order to fit the wheel with the original car better, through the ring to reach the gap with the original car just a good gap, so will not loose the lug nuts of the vehicle hub to prevent 80KM-120KM produce steering wheel jitter situation..
  • 【Fine Workmanship Size Precision】These Hubrings are made of High Quality 6061 Aluminium Alloy, CNC Machined, Red Anodic Oxidation, nice looking and corrosion resistant, heat resistant and durable..
  • 【Hub Ring Inner Diameter】I.D : 78.1mm, must match Vehicle hub bore.
  • 【Hub Ring Outer Diameter】O.D : 106mm, must match wheel center bore.
  • 【Fitment】 Buyer is responsible for ordering the correct size. It is necessary that you measure your vehicle hub bore size and your wheel center bore before purchasing. If you are not 100% sure of your vehicle hub size, send us email and we will be happy to look it up for you. Just provide the Year, Make, Model of your vehicle..
Check Stock

Brush Research 1\ (25mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 2\ (51mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock