Reviews Boost Gauge Mounting Bracket

GAZOZ PERFORMANCE Vacuum Tap Turbo Boost Gauge Sensor Adaptor Adapter for BMW F20 F30 316 320 N20

  • This auction is for VACUUM Tap Turbo Boost Gauge  Sensor Adaptor For BMW 320 328 N20.
  • This adapter installs between the boost sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge..
  • Content: one piece of boost adapter and screws.
  • Required basic knowledge to installation boost gauges in cars.Feel free to contact with us to confirm car model.
Check Stock

GlowShift Black 7 Color 35 PSI Turbo Boost Gauge Kit - Includes Mechanical Hose & Fittings - Black Dial - Clear Lens - for Car & Truck - 2-1/16' 52mm

  • GlowShift Black 7 Color Series 35 PSI Boost Gauge is Designed to Monitor Boost Pressure Levels of Your Diesel Truck’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 35 PSI – 2-1/16″ (52mm) Gauge with Black Dial, Clear Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle – Colors Include Blue, Red, Green, Teal, Purple, White & Yellow – Connecting the Dimmer Wire to the Headlight Switch Reduces Brightness of the Gauge by 30% When the Headlights are On.
  • Includes 1/8-27 NPT Compression Fittings, 9′ Nylon Boost Hose, 2′ Power Wire, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Tinted 7 Color 60 PSI Turbo Boost Gauge Kit - Includes Mechanical Hose & Fittings - Black Dial - Smoked Lens - for Diesel Trucks - 2-1/16' 52mm

  • GlowShift Tinted 7 Color Series 60 PSI Boost Gauge is Designed to Monitor Boost Pressure Levels of Your Diesel Truck’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 60 PSI – 2-1/16″ (52mm) Gauge with Black Dial, Tinted Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle – Colors Include Blue, Red, Green, Teal, Purple, White & Yellow – Connecting the Dimmer Wire to the Headlight Switch Reduces Brightness of the Gauge by 30% When the Headlights are On.
  • Includes 1/8-27 NPT Compression Fittings, 9′ Nylon Boost Hose, 2′ Power Wire, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Black 7 Color 60 PSI Turbo Boost Gauge Kit - Includes Mechanical Hose & Fittings - Black Dial - Clear Lens - for Diesel Trucks - 2-1/16' 52mm

  • GlowShift Black 7 Color Series 60 PSI Boost Gauge is Designed to Monitor Boost Pressure Levels of Your Diesel Truck’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 60 PSI – 2-1/16″ (52mm) Gauge with Black Dial, Clear Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle – Colors Include Blue, Red, Green, Teal, Purple, White & Yellow – Connecting the Dimmer Wire to the Headlight Switch Reduces Brightness of the Gauge by 30% When the Headlights are On.
  • Includes 1/8-27 NPT Compression Fittings, 9′ Nylon Boost Hose, 2′ Power Wire, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift White 7 Color 60 PSI Turbo Boost Gauge Kit - Includes Mechanical Hose & Fittings - White Dial - Clear Lens - for Diesel Trucks - 2-1/16' 52mm

  • GlowShift White 7 Color Series 60 PSI Boost Gauge is Designed to Monitor Boost Pressure Levels of Your Diesel Truck’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 60 PSI – 2-1/16″ (52mm) Gauge with White Dial, Clear Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle – Colors Include Blue, Red, Green, Teal, Purple, White & Yellow – Connecting the Dimmer Wire to the Headlight Switch Reduces Brightness of the Gauge by 30% When the Headlights are On.
  • Includes 1/8-27 NPT Compression Fittings, 9′ Nylon Boost Hose, 2′ Power Wire, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Rockville DWB80W Dual 8\ White 800 Watt Marine Wakeboard Tower Speaker System

  • ...ne Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable..
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Trans....
Check Stock

(4) Rockville RMSTS80S 8\ 2000 Watt Waterproof Marine Boat Speakers 2-Way Silver

  • ...ne Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable..
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Trans....
Check Stock

Hooke Road Tacoma Stubby Front Bumper Solid Steel Truck Offroad Bumper Compatible with Toyota Tacoma 3rd Gen 2016 2017 2018 2019 2020 2021 2022

  • One-piece design stubby front bumper for Toyota Tacoma 2016 2017 2018 2019 2020 2021 2022.
  • Exciting off-road styling. Delicate hollowed-out honeycomb design on both sides. License plate mounting bracket included..
  • Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structure mounting bracket. Textured black....
  • High strength D-Ring mounts welded both inside and out with 4.75-ton capacity. 9500 lbs rated, 3/4'' D-rings included. Comes with 2×18w LED....
  • Bumper weight: about 65 lbs. Simple bolt-on installation. No drilling or cutting required. Not compatible with factory sensors..
Check Stock

GlowShift 3in1 Analog 60 PSI Boost Gauge Kit with Digital 2200 F Pyrometer Exhaust Gas Temp EGT & 300 F Temperature Readings - 10 Selectable LED Colors - Black Dial - Clear Lens - 2-3/8' 60mm

  • GlowShift 3in1 Diesel Combo Gauge Allows Users to Monitor 3 Vital Engine Components from 1 Unit with an Analog Boost & Blue Digital Exhaust Gas Temperature & Temperature Displays.
  • Analog Boost Readings from 0 to 60 PSI – Digital EGT Readings from 200° to 2200°F – Digital Temperature Readings from 68° to 302°F.
  • 2-3/8″ (60mm) Diameter Gauge with Black Dial, Clear Lens & Illuminated Red Needle – 10 Solid Color Modes & 2 Color Cycle Modes – 6 Daytime & Nighttime Dimming Modes.
  • Boost Gauge Parts: 1/8-27 NPT Pressure Sensor & 8′ Sensor Harness – EGT Gauge Parts: 1/8-27 NPT EGT Probe with 3′ of Wire & 6′ Sensor Harness – Temperature Gauge Parts: 1/8-27 NPT Temp Sensor & 8′ Sensor Harness – 3′ Power Harness, Dashboard Pod, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift 10 Color Digital 30 PSI Boost/Vacuum Gauge Kit - Includes Electronic Pressure Sensor - Multi-Color LED Display - Tinted Lens - for Car & Truck - 2-1/16' (52mm)

  • GlowShift 10 Color Digital Series 30 PSI Boost/Vacuum Gauge is Designed to Monitor Boost Pressure & Vacuum Compression Levels of Your Car’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 45 PSI & Vacuum Readings from -30 to 0 inHg – 2-1/16″ (52mm) Gauge with Digital Display & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display – 10 Solid Color Modes & 2 Color Cycle Modes – Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes Electronic Pressure Sensor, 9′ Sensor Harness, 2′ Power Harness, 6′ Clear Vacuum Line, 1/8″ T-Fitting, Air Filter, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock