Reviews Book For Digital Logic Design

Logic Analyzer,USB Logic Analyzer Device Set Mini Digital Pocket Size 8 Channel Input Memory 24MHz

【Wide Range of Applications】Logic analyzers are widely used in automotive electronics, communications, power supplies, computers and other industries. They are professionally manufactured and can provide convenient, intuitive and powerful analysis functions.
【8 Inputs】Each channel of the USB logic analyzer is up to 24M times per second, with good performance, and 8 channels of logic inputs, which can monitor 8 different digital signals at the same time.
【Compound Trigger】The logic analyzer supports a variety of trigger methods, including rising edge, falling edge, high-level trigger, and low-level trigger. The above four basic methods are combined into a composite trigger.
【Exquisite Craftsmanship】The logic analyzer is exquisite in workmanship, easy to use, and has a long service life. It is indicated by a logic pen and a small light indicates the CH1 level, which is very intuitive.
【Data Storage Upload】Real-time upload of USB logic analyzer data, the upper computer adopts compressed storage, the maximum acquisition depth is 10T, which far exceeds actual needs, and is reliable in use.

Driver unit: 50mm (CCAW voice coil adoption) / Reproduction bandwidth: 5-25,000Hz / Power supply: Built-in lithium ion chargeable battery.
Battery life: 12 hours (With fully charged built-in lithium ion chargeable battery) / Weight: 320g, processor - 410g.
Decoder: Dolby TrueHD, Dolby Digital Plus, Dolby Digital, Dolby Pro Logic IIx, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS, DTS Neo:6, MPEG-2 AAC, LPCM 2ch/5.1ch/7.1ch, Dolby Pro Logic IIz.
Input terminal: HDMIx3, Opticalx1, Stereo pin jack x1 / Output termail: HDMIx1, Opticalx1.
Included Accessories: AC Adapter Optical digital cable (1.5m) Charger micro USB cable (1.5m).

100 MHz MSO with 2 Ch/25 MHz source, 4 analog/16 digital channels with logic probe.
Includes DS1104Z-S Plus scope and RPL1116 logic probe.
Includes 2 channel integrated waveform generator.

Driver unit: 50mm (CCAW voice coil adoption) / Reproduction bandwidth: 5-25,000Hz / Power supply: Built-in lithium ion chargeable battery.
Battery life: 12 hours (With fully charged built-in lithium ion chargeable battery) / Weight: 320g, processor - 410g.
Decoder: Dolby TrueHD, Dolby Digital Plus, Dolby Digital, Dolby Pro Logic IIx, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS, DTS Neo:6, MPEG-2 AAC, LPCM 2ch/5.1ch/7.1ch, Dolby Pro Logic IIz.
Input terminal: HDMIx3, Opticalx1, Stereo pin jack x1 / Output termail: HDMIx1, Opticalx1.
Included Accessories: AC Adapter Optical digital cable (1.5m) Charger micro USB cable (1.5m).

MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Wide analog input voltage range from -5 V to +5 V.
Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals.
Typical ‘break before make’ built-in.

MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.

Machine introduction: LA104 is a four-channel logic analyzer with built-in screen and battery. The casing of LA104 is made of aluminum alloy through CNC..
Easy to use: It is compact and portable, making it easy for users to work on bench or outdoors..
The effect is obvious:LA104 has a 2.8-inch LCD display that allows the measured logic waveform to show directly on the screen, without connecting to other external display devices..
Multiple trigger modes: There are three serial protocol analyses: SPI, I2C, UART, supporting user-defined protocol mode.
Muti-functional: suitable for digital hardware verification and debugging, monitoring, measurement and optimization of digital hardware performance, and integration, debugging and verification of embedded software..