Reviews Bolts Left Hand Thread

Xitomer M8x1.25 Motorcycle Mirror Blanking Plugs , Fit for Street fighter 848, Fit for Diavel / Strada, Monster 821 /1200 /1200S /696 /796 / 1100 and so on, Motorcycle Mirror Hole Plugs

  • Fitment: All M8*1.25 Thread Mirror Hole (Please See the Detail Description).
  • Mirror Hole caps: Protect mirror hole from Water, Rust and Dust When You Remove Stock Mirrors and use bar end mirrors.
  • Size & Material: M8*1.25, 20g(0.04lbs), 6063-T6 Aluminum Alloy and Durable Anodize surface finish..
  • Package: Come with Aluminum Bolts in Thread of Normal (Regular) and Reverse, (Left Hand and Right Hand).
  • Easy Install: Just Screw in by Hand within a Minute (Installation Instruction Included).
Check Stock

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock

Drill Hog® 15 Pc Left Handed Drill Bit Set Screw Extractor EZ-OUT HI-Molybdenum M7

  • Left Hand Thread for Removing Broken Bolts, Screws, and Studs.
  • 135 Degree Split Point Prevents "Walking".
Check Stock

OEM Genuine Shindaiwa A056000430 / 70102-51100 Clutch Assembly for C270 PB270 T270 + (Free Two e-Books)

  • Part № A056000430, Old Part № 70102-51100.
  • Clutch is approx. 53.09mm Diameter, 19.5mm Width , Left or Right hand rotation (depends on which way it is installed), Bolts : Shoulder is approx. 9mm Dia by 12m Long.
  • Bolts are (30.5mm Overall) 13mm Hex, 6mm x 1.0 thread.
  • Fits the following model and serial numbered units: C270, PB270, T270..
  • If you have any questions about this item or model, serial number, please ask question to us @@We strive to provide the best service. We value our customers. Also we will send you an ebooks within 48 hours after the purchase. First еbook - Professional Lawn Care For Your Home…By You and Second ebook - Mowing and Trimming Safety..
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock

NEIKO 01925A Screw-Extractor and Left-Hand Drill-Bit Set, HSS M2 Steel Drill Bits, Alloy Spiral Flutes, Reverse Drill-Bit and Bolt Extractor, Easily Remove Stripped Screws and Broken Bolts, 10 Pieces

  • BOLT EXTRACTORS: Extraction bits easily remove broken screws, studs, bolts and other fittings effectively. Stripped bolt remover and extractor works on seized bolts, broken fasteners, and commonly called an easy out..
  • LEFT HANDED DRILL BIT: Left-hand drill bits are made from cobalt fortified high speed steel for increased durability and service life. Reversed drill bit are used for removing broken bolts or studs turning left to prevent further tightening of the bolt or screw..
  • SPIRAL FLUTES: Unscrew tool with spiral flute bit dig into the screw, increasing grip as torque is applied for removal of screws, fasteners and bolts. Strip screw extractor kit gets those stubborn fasteners out..
  • METAL CARRYING CASE: Stored in a durable metal index carrying case for easy organization and storage with all sizes that are clearly labeled. Carrying size for when WD40 or easy out lubricant doesn’t get the job done..
  • INCLUDES: Sizes: Left hand bits / reversed drillbits - 5/64", 7/64", 5/32", 1/4", 19/64" and Matching Alloy Extractors (stud outs) - #1, #2, #3, #4, #5 in a ....
Check Stock

Frame Sliders, 10mm Universal Motorcycle Anti Crash Protector Glue Stick Falling Protection Cover for Yamaha Honda Suzuki Motorcycles Repair Parts (Black)

  • Size : Frame slider dimensions (length x diameter): 96mm x 48mm, Bolt length (inc thread): 123mm, Thread diameter: 10mm Bolts High Quality: Frame Sliders made by smooth plastic & aluminum material, anti crash and durable to use..
  • Multiple Colors : All frame slider kits included left and right frame sliders and all necessary mounting hardware,black / yellow / blue / red / green / white / Orange for choose.
  • Falling Protection: Frame sliders help to protect the frame, engine cases and bodywork/fairings to minimize the cost of repair..
  • Easy to install : Crash Pads is easy and simple to use and install,no fixed location, you can install them to any place where the bolts can go through and fixed..
  • Application: Frame Crash Sliders is universal and useful, fit for most motorcycles, like Yamaha ,Suzuki ,Kawasaki, Honda, Ducati ,Triumph ,BMW-Aprilia.
Check Stock

5Pack M4 x 250mm Fully Threaded Rod Stud 304 Stainless Steel 10”Long Threaded Screw, Right Hand Thread Bar Studs Rods for Anchor Bolts, Clamps, Hangers, U-Bolts, M4-0.7mm Thread Pitch

  • 【Package Include】5pcs M4 x 250mm Threaded Rod, can be drilled, cut, heated and shaped..
  • 【Material】Made of high quality 304 stainless steel, excellent corrosion resistance and anti-rust ability for a long service life..
  • 【All Thread】Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 【Applications】Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
Check Stock

Hard-to-Find Fastener 014973100506 Coarse Hex Bolts, 3/8-16 x 3/4, Piece-100, zinc

  • 【Bolts Dimension】Thread diameter: M12.
  • 【Standard and Grade 】Hex Head Bolts Standard: ISO4017/DIN944. Performance grade : 6.8 ..
  • 【Material】Hex Head Bolts is made of 304 Stainless Steel which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • 【Wide Application】Hex Head Bolts are widely used in the assembly and maintenance of households, machine tools, construction, ships and DIY project. Such as the assembly and fixing of guardrails, home appliances, pipeline installations, equipment, steel-framed houses, etc..
  • 【Package Content】5Pcs x Hex Head Bolts.
Check Stock