Reviews Bolting Systems

Lokrite Hands-Free Box-End Backup Wrench, 8 Piece Set

  • The Lokrite Hands-Free magnetic Backup Wrench is a revolutionary tool when it comes to bolting or torqueing work..
  • The Lokrite hands-free magnetic backup wrench eliminates the need to have a second person holding a backup wrench during breakouts or bolting and torqueing work..
  • Lokrites are magnetic, pinch-point free, and have a tension release bolt for easy removal..
  • Lokrite backup wrenches are lighter and easier to carry than conventional backup wrenches and they are available with tie offs and tethers for fall protection..
  • The Lokrite Hands-Free Box-End Wrench can handle a load limit up to 3500 ft lb.
Check Stock

Titan Attachments Notched Disc Harrow 5 ft. 3 Point Category 1

  • ...ugh heavier crop debris. These blades are great for land that has not been tilled in the past and are perfect for breaking up weed root systems allowing them to breakdown faster..
  • CATEGORY 1, 3 POINT: This adapter comes ready to attach directly to your Tractor’s Category 1, 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins..
  • DURABLE CONSTRUCTION: The 60-inch Disc Harrow is constructed using 2.5 x 2.5-inch steel tubing that is powder-coated to prevent rust and corrosion. The 16-inch notched discs are made from hardened steel. The 4-disc axles are equipped with cast iron bearing caps and spools that are greaseable..
  • DIMENSIONS: The overall dimensions of the Cat 1, 3 Point 5 FT Disc Harrow are 60-inches wide x 45-inches deep x 30.5-inches high. The notched discs are 16-inches in diameter and spaced 7.5-inches apart. The lower lift pins on the 3 Point hitch are 3.5-inches long and measure 28-inches apart, center to center..
Check Stock

Eight Recessed Tie-Down D-Rings Square Trailer Cargo Tie-Down Anchors Mounting Lock Plate + Installation Bolting Hardware Accessories - Carriage Bolts Hex Nuts Flat Washers

  • bundle includes 8 square 4-3/4" x 4-1/2" galvanized steel recessed-pan fitting D-ring trailer tie-down anchors with holes on the bottom of the pans that ensure water weeps out (assembly break strength of 6,000 pounds and a safe working load limit of 2,000 pounds), + 1/10" thick black steel trailer plates + bolting hardware.
  • Square 1/2" x 1/2" diameter bolting holes are PERFECT for securing with the PROVIDED Grade A ASTM A307 2.5" long 3/8" diameter carriage head bolts, hex nuts, 3/32" flat washers.
  • These tie-downs can be used in so many CUSTOM ways! Easily anchor logistic tie downs, S-hook or J-hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on pickup truck beds, utility trailers, flatbeds, in enclosed trailers, boats, and vans by inserting the hook ends or strap webbing through the 1-1/2" x 1-1/2" (inner clearance) D-rings on these recessed-pan fittings.
  • This product includes 8 recessed D-ring anchors + compatible lock plates + bolting hardware..
Check Stock

Four Recessed Tie-Down D-Rings, Square Trailer Cargo Tie-Down Anchors, Mounting Lock Plate + Installation Bolting Hardware Accessories - Carriage Bolts, Hex Nuts, Flat Washers

  • ... includes 4 square 4-3/4" x 4-1/2" galvanized steel recessed pan fitting D-ring trailer tie down anchors with holes on the bottom of the pans that ensure water weeps out (assembly break strength of 6,000 pounds and a safe working load limit of 2,000 pounds), + 1/10" thick black steel trailer plates + bolting hardware.
  • Square 1/2" x 1/2" diameter bolting holes are perfect for securing with the PROVIDED Grade A ASTM A307 2.5" long 3/8" diameter carriage head bolts, hex nuts, 3/32" flat washers.
  • These tie-downs can be used in so many custom ways! Easily anchor logistic tie-downs, S-hook or J-hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on pickup truck beds, utility trailers, flatbeds, in enclosed trailers, boats, and vans by inserting the hook ends or strap webbing through the 1 1/2" x 1 1/2" (inner clearance) D-rings on these recessed-pan fittings.
  • This product includes 4 recessed D-ring anchors + compatible lock plates + bolting hardware..
Check Stock

Titan Attachments 4 FT Notched Disc Harrow Plow, Category 1, 3 Point, for Kubota New Holland Tractors

  • ...eat for land that has not been tilled in the past and are perfect for breaking up weed root systems allowing them to breakdown faster..
  • CATEGORY 1, 3 POINT: This adapter comes ready to attach directly to your Tractor’s Category 1, 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins..
  • DURABLE CONSTRUCTION: The 48-inch Disc Harrow is constructed using 2.5 x 2.5-inch steel tubing that is powder-coated to prevent rust and corrosion. The 16-inch notched discs are made from hardened steel. The 4-disc axles are equipped with cast iron bearing caps and spools that are greaseable..
  • DIMENSIONS: The overall dimensions of the Cat 1, 3 Point 4 FT Disc Harrow are 48-inches wide x 45-inches deep x 30.5-inches high. The notched discs are 16-inches in diameter and spaced 7.5-inches apart. The lower lift pins on the 3 Point hitch are 3.5-inches long and measure 28-inches apart, center to center..
Check Stock

Titan Attachments 6 FT Notched Disc Harrow Plow, Category 1, 3 Point, for Kubota New Holland Tractors

  • ...eat for land that has not been tilled in the past and are perfect for breaking up weed root systems allowing them to breakdown faster..
  • CATEGORY 1, 3 POINT: This adapter comes ready to attach directly to your Tractor’s Category 1, 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins..
  • DURABLE CONSTRUCTION: The 72-inch Disc Harrow is constructed using 2.5 x 2.5-inch steel tubing that is powder-coated to prevent rust and corrosion. The 16-inch notched discs are made from hardened steel. The 4-disc axles are equipped with cast iron bearing caps and spools that are greaseable..
  • DIMENSIONS: The overall dimensions of the Cat 1, 3 Point 4 FT Disc Harrow are 72-inches wide x 45-inches deep x 30.5-inches high. The notched discs are 16-inches in diameter and spaced 7.5-inches apart. The lower lift pins on the 3 Point hitch are 3.5-inches long and measure 28-inches apart, center to center..
Check Stock

Ingersoll Rand 2175MAX 1" Pistol Grip Impact Wrench, Air Powered, Up to 2000 ft lbs Reverse Torque Output, Lightweight, 360 Degree Adjustable Handle, Steel Core, Gray

  • POWERFUL PERFORMANCE: This impact wrench is lightweight at under 20 pounds, but delivers up to 2000 lb-ft of extreme reverse torque that lasts for the life of the tool.
  • RELIABLE DURABILITY: The steel core and chemical resistant housing are made to last even in the harshest working conditions and stand up to drops.
  • 360° ADJUSTABLE HANDLE: The side handle rotates fully around the tool as the job demands, increasing maneuverability and user comfort.
  • SWIVEL HOSE CONNECTION: Keeps cords from getting tangled so you can move freely around the garage.
  • BIG BOLTING JOBS: The IR 2175MAX is engineered for big bolting jobs, semi, bus, and heavy equipment tires.
  • Every component, mechanism, and function has undergone rigorous testing to ensure long-lasting performance.
Check Stock

4 Pack | D-Ring Tie-Down Anchors Large Square Recessed Pan Fitting D-Rings Heavy Duty Steel Cargo Tie-Downs,Truck/Trailer/Flatbed/Pickup Anchor Note Hardware NOT Included.

  • ✔ HEAVY DUTY: 4 pack | NOTE: Hardware is NOT included. These heavy duty 1-1/2" inner clearance D-rings are made of high quality galvanized steel for....
  • ✔ WELL-DESIGNED: The D-ring lies flush in its 4-3/4" x 4-1/2” square recessed pan fitting so the D-ring doesn’t hazardously protrude from the....
  • ✔ EASY INSTALLATION: Use a hole saw and chisel and bolting hardware - not included. The 1/2” x 1/2” square bolting holes are perfect for....
  • ✔ ANCHOR ACTION: Trailering your motorcycle or snowmobile cross-country? Strapping down pallets in a warehouse? Anchoring boats and marinas at the....
Check Stock

12PCS V Ring Tie Down Anchors 2 Diameter Steel Tie Down V-Ring Bolt On Trailer Anchor for Trailer,Cargo,Truck,Warehouse,Boat

  • APPLICATION: The Tie-down V-ring provide attachment points to anchor all logistic tie-down ratchet and cam buckle straps, ropes, hooks, and chains to secure cargo of all sizes and weights - bikes, ATVs, UTVs, quads, motorcycles, furniture, camping equipment, delivery boxes, appliances, heavy machinery and power tools, and other loads..
  • STRONG & DURABLE:The V Ring Cargo Tie-Down Anchors are made of high-density solid steel and painted with premium black protective powder coating to ensure they are not corroded or rusted during long working hours.Each anchor can take a load of 1500 pounds and 4000 pounds break strength.
  • EASY TO INSTALL:Thread a screw or bolt through the bolting hole on the mounting clip and secure to any wood or metal surface.This cargo tie down anchors are easy to install.
  • SIZE:2-1/4" x 2.5" V-rings with 0.5" bolting hole diameter.
  • PACKAGE CONTAINS: 12pcs Cargo Tight Anchor.
Check Stock

DC Cargo Mall 8 Pack | D-Ring Tie-Down Anchors (Large Square), Recessed-Pan Fitting D-Rings Heavy Duty Steel Cargo Tie-Downs, Truck/Trailer/Flatbed/Pickup Tie-Down Anchor

  • ✔ HEAVY DUTY: 8 pack | Hardware NOT included. These heavy duty 1-1/2" inner clearance D-rings are made of high quality galvanized steel for rust and corrosion resistance. Assembly break strength of 6,000 pounds and a safe work load limit of 2,000 pounds..
  • ✔ WELL-DESIGNED: The D-ring lies flush in its 4-3/4" x 4-1/2” square recessed-pan fitting so the D-ring doesn’t hazardously protrude from the floor. Weep holes on bottom of the pan ensure that water drains out..
  • ✔ EASY INSTALLATION: Use a hole saw and chisel and bolting hardware - not included. The 1/2” x 1/2” square bolting holes are perfect for securing your anchor with CARRIAGE BOLTS. These can be low floor flush mounted onto wooden trailer floors and other surfaces..
  • ✔ ANCHOR ACTION: Trailering your motorcycle or snowmobile cross-country? Strapping down pallets in a warehouse? Anchoring boats and marinas at the dock? Get ready for some ANCHOR ACTION with these versatile and dependable recessed tie-downs. Easily secure logistic straps, bungee cords, ropes, soft loops and chains..
Check Stock