Reviews Bolt Screw Rivet

13PC Chain Cutter Rivet Tool Set Riveting Breaker ATV Bike Motorcycle Cam Drive PT1082

• ◇ Cam Chain Breaker Riveter : Breaks and Rivets/ Stakes all over head cam chains on all model Japanese and European OHV Cam Chains.
• ◇ Function : This tool is designed to rivet chain links to form an endless chain and is versatile enough to be used on cam chain to drive chains or as a chain breaker by pushing the pin out.
• ◇ Easy to Use : Instructions – Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool, and place the spring on the pin inside the tool. Then, replace the tightening bolt and remove the top bolt. Screw on the handle and lever, place the tool over your chain, and tighten the tool on the chain pin (this forces the chain and pin out the other side).
• ◇ Practical : For Breaking and joining most drive chain from 420-630,For chain #520 and up, it is recommend to grind the rivet head, Recommended for light to medium duty use.
• ◇ Contents : Package includes (1) chain press + (1) handle + (1) lever + (3) anvils, (3) pins – 2.2mm, 2.9mm, 3.8mm + (1) riveter + (1) spring + (2) press plates + (1) carrying case.

Prime-Line D 1797 Sliding Door Roller, 1-1/2 inch Steel Ball Bearing, (2-pack)

• Used to replace rollers that are 1-1/2 in. diameter.
• Can be mounted using a rivet, a roll pin, drive pin, binder post and screw or bolt and nut to install the roller in place.
• Contains 2 steel ball bearing wheels, 2 axle pins, 2 roll pins, 2 carriage bolts with nuts, 2 rivet axels and 2 binder posts with #8-32 x 1/2 in. screws.
• Easy to install in less than 30 minutes with a few simple tools.
• Can be used in many different patio door or closet door roller assemblies.

Motorcycle Chain Breaker Riveter Set, 13-Piece Chain Link Breaker, Master Chain Press Rivet/Riveting Cutter Removal Repair Tool Kit, chain splitter For Motorcycle Bike Atv

• ...rive or cam chain #35 to #630 including o-rings..
• 【PREMIUM MATERIAL】The heavy-duty chain breaker ​is constructed from 45# carbon steel to ensure strength and longevity. surface black anodic oxidation for ultimate anti-rust performance..
• 【EASY to USE - CHAIN BREAKER RIVETER SET】➊ Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool and place the spring on the pin inside the tool. ➋ replace the tightening bolt and remove the top bolt. ➌ Screw on the handle and lever. ➍ place the tool over your chain, and tighten the tool on the chain pin (this forces the chain and pin out the other side)..
• 【PACKAGE INCLUDE】1x chain press + 1x handle + 1x lever + 3x anvils, 3x pins (2.2mm, 2.9mm, 3.8mm) + 1x riveter + 1x spring + 2x press plates with 1x carrying case for easy transportation simple storage and quick organization..

20 Sets Brass Bracket Bolt Fasteners Tool Head Diameter 6 mm Tactical Lock Rivets EDC Knife Handle Pins Hardware Knife Screws Knife Making Supplies Blind Rivets (Gold)

• ...viceable, not easy to deform, fade, or break, and can serve you for a long time, however, please keep in mind that you must first determine whether the size is appropriate before use.
• Package Includes: the package includes 20 sets of tactical lock rivets, each set with one screw and stud, enough quantities to meet your daily use and replacement needs, you can also share with others, the small tool will bring you a lot of convenience.
• Size Information: the length of each fastener is about 25 mm, the outer diameter of the rivet shaft is about 4 mm, and the outer diameter of the rivet head is about 6 mm.
• Easy to Assemble: drill a hole in the surface of the object where the knife screw will be installed, then tighten the screw with a flat blade screwdriver, if you need to finish the handle pin, you can polish the protruding excess part to create a solid handle pin appearance.
• Broad Utilization: knife making hardware is appropriate for DIY, it can be applied on a suitable knife handle according to actual needs, such as slicing knife, cleaver, chopping knife, fruit knife, and so on,....

Fender Flare Hardware Kit Screw/Bolt Fastener Compatible for Ford Universal Pocket/Rivet Style

• Fender Flare Hardware Parts Kit Screw/Bolt Compatible For Ford Universal Pocket/Rivet Style.
• 1 set Fender Flare Hardware Kit Come with Nuts, Bolts, Rivets,Washer Same as picture..
• This Is Aftermarket Replacement Item But Not Genuine.
• 100% Brand new.Made from materials of premium quality..
• Enhance The Look Of Your Vehicles Engine Bay and Exterior, Easier to find them when installing and dismounting.

Expanding Push In Rivet, Plastic L, 8mm, Black - pack of 5

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

• Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
• Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
• Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.

Disco Automotive 8681 Grey Replacement Hex Head Body Bolt Assortment

• High quality: The bumper clip is made of high-quality nylon material, which is sturdy and durable, resistant to wear and corrosion, and the rivet clip is not easy to break or break. It is a new type of automobile bumper splash plate bolt hardware kit..
• Reasonable design: The motive splash plate body bolt kit is small in size, light in weight and easy to carry. You can replace them anytime and anywhere. The rivet clip can replace and fix the bumper very well..
• Versatility: Bumper clip bolts are widely used in car door decoration, bumpers, splash plate retainers, bell mouths, radiator guards, engine cover fenders, etc., and can also be used in furniture and electronic equipment applications..
• Multi-scene use: This new engine splash plate bolt hardware kit is suitable for Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)..
• High-quality packaging and after-sales service: 15 built-in fender washer bolts and screws, 15 extruded U-shaped nuts, 20 bumper clips.
• we support 180-day worry-free return and exchange, if you have any questions, please contact us directly, we Will reply you within 24 hours within working days..

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

• Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
• Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
• Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
• Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
• Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.

wesleydrill Rivet Gun Adapter Kit,Professional Riveting Insert Nut Hand Tool Kit,2.4/3.2/4.0/4.8mm Diameter Rivet Head, Aluminum Housing, Fit for Cordless Drill,Sheet Metal Work

• ...ntage]: The riveting adapter can turn your cordless drill into a convenient riveting tool, making your riveting process easier and more efficient, with low noise, high efficiency, small size and easy portability..
• [Quick Replacement, Safe Installation]: The adapter hexagon screw is connected to the electric drill, and the electric riveting gun can be turned quickly, which is convenient for installation..