Reviews Bolt Chevy Rims

VLAOSCHI Black Forged 6x5.5 to 5x5.5 Wheel Adapters 2 Inch w/ M14x1.5 Studs Compatible with Chevy GMC - 6 Lug to 5 Lug Adapter for Suburban Silverado Sierra 1500(5x139.7 Rim on 6x139.7 Car)- Pack of 4

  • ...6 aerospace aluminum, CNC precisely machined, undergoes anodizing process to prevent surface corrosion and rust, with pre-installed heat treated 10.9 grade carbon steel studs..
  • 【Applications】These are 6x5.5 to 5x5.5 wheel adapters, change bolt pattern(Adapt 5 lug 5.5" rims to 6 lug 5.5" vehicle), compatible with Chevy GMC 6 lug vehicles: 2000-2021 Suburban, 1999-2021 Silverado 1500, 1995-2021 Tahoe, 2003-2014 Express 1500, 1992-2021 Yukon, 1999-2021 Sierra 1500, 2003-2014 Savana 1500, 1999-2021 Escalade, 2019-2021 R-A-M 1500.
  • 【Specifications】Pack of 4 Wheel Adapters. Thickness: 2" / 50mm | Vehicle Bolt Pattern: 6x5.5" / 6x139.7 | Wheel Bolt Pattern: 5x5.5" / 5x139.7 | Thread Pitch: 14x1.5 studs & nuts | Center Bore: 108mm..
  • 【Installation & Warranty】Easy bolt-on installation, no special tool needed. All VLAOSCHI products are covered by two years warranty to be free of defects in material and workmanship. Please note: recheck all bolts after 20-50 miles of driving, then again after 1-2000 miles..
Check Stock

17\ ABS Chrome Plated Wheel Simulator Set for Chevy GMC Silverado 3500 2011~Newer

  • Made of highest grade of ABS+PC with surface chrome-­‐plated for shiny looking and best durability..
  • Bolt-­‐on design for easy installation for secure fit..
  • Fits makes: 17” Chevy Silverado 3500/GMC 3500/Sierra 3500 for 2011~Newer.
  • Comes with: 2 ABS Front Simulators, 2 ABS Rear Simulators, 2 ABS Front Center Caps, 2 ABS Rear Center Caps.
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock

  • ✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
  • ✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
  • ✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
  • ✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

Speedway Motors GM Dual Pattern Silver 15” x 10” Rally Wheel, 5 x 4.5 Inch – 5 x 4.75 Inch Bolt Direct-Fit Bolt Pattern, Rear-Wheel Drive Vehicle Only

  • Adds that classic 15" GM rally wheel look to your vehicle with brand new steel rims.
  • Your option of silver painted or chrome finish to customize your ride.
  • Available in 15x4, 15x5, 15x6, 15x7, 15x8 and 15x10 for that offset look.
  • Convenient dual drilled bolt pattern for 5 on 4-1/2" (Ford) or 5 on 4-3/4" (Chevy).
  • 3.22" center bore fits drum or disc brake applications / RWD vehicles only.
Check Stock

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

  • Brand New Southwest Speed Front Engine Mounting Kit that includes O.E. Replacement Front Engine Mounts, and Powder Coated Black Engine Mounting Brackets that fits 1955-1957 Chevy's with Small Block Chevy V-8 Engines (SWS # 400-6897) > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components.
  • This Southwest Speed 1955-1957 Chevy front engine mounting kit mounts the Small Block Chevy engine in the correct location in 55-57 Tri-Five Chevy’s The front engine mounts includes the shafts, rubbers, washers, nuts, and lock washers that are usually missing or worn out on 55-57 Tri-Five Chevy's > This kit will do both sides, and includes everything pictured to restore the mounts back to new condition.
  • The Mounting brackets are Powder Coated Black and are the OEM replacement brackets with all the correct contours This kit includes both the left and right side front engine mounts, and both left and right side front engine mounting brackets, that includes everything pictured.
  • Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of t....
Check Stock

Can-Am 2017-2018 Maverick X3 900 Front Rim 705401965 New Oem

  • RockTrix Wheels Offroad ATV Rims - Fits machines with 4/156 Bolt Pattern and a hub bore no larger than 131mm. Works with various ATV, UTV, Side by Side, Quads. Verify fitment by checking that your machine's bolt pattern, center hole, and offset match that of our ATV wheels before making your purchase..
  • Compatible with Polaris: Sportsman X2 500 550 570 800.
  • Sportsman 300 400 450 500 570 600 700 800 ACE.
  • Ranger XP 700 800 900 1000, Ranger Crew 500 570 800 900.
  • Big Boss 250 400L 500 Please check the year and model in the description. Can fit many others, verify using the listed specifications..
  • This listing is for a set of Four (4) ATV Wheels RockTrix Rims - 12" Diameter, 4+3 Offset, 12x7 Size, 4x156 Bolt Pattern, 131 mm Bore. Four (4) RockTrix Center Caps. Valve Stems Not Included. All parts arrive packaged in one box..
  • Upgrade to these RockTrix aluminum single piece rims - light years ahead of factory steel rims. Precise, CNC Machined, solid 1-piece cast, lightweight aluminum wheels with a matte black powder finish. Topped with a high quality clear coat that is scratch, rust, and corrosion resistant....
Check Stock

2001-2007 16\ Chevy Gmc Truck or 3500 2003-2016 Express 3500 4500 Wheel Simulators

  • 2001-2007 Chevy Gmc Truck or 2003-2016 Chevy Express 3500 4500 16" Wheel Simulators Bolt on.
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1963-1972 CHEVY AND GMC TRUCK'S WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, C10 C20 C30 C15 C25 C35 1000 1500 2500 3500 3000 3500 C1500 C2500 C3500

  • Brand New Southwest Speed Bolt-In Tubular Transmission Crossmember For 1963-1972 Chevy And GMC Trucks (SWS Part # 400-7096) | * This Southwest Speed Bolt-in Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1963-1972 Chevy And GMC Truck | * This Crossmember Will Also Work With GM Manual Transmissions Including Later Model Muncie And Saginaw 3 And 4 Speed Manual Transmissions.
  • This Isn't A Universal Fit Unit. This Is A Direct Bolt-in For The 1967-1972 Chevy And GMC Trucks, But Will Require Drilling The Mounting Holes On The 1963-1966 Chevy And GMC Trucks | * The Tubular Crossmember Also Increases Exhaust Pipe Clearance In Critical Areas | * This Crossmember Is Shipped Complete And Includes The Necessary Hardware To Mount The Crossmember | * Crossmember Requires The Use Of The Polyurethane Or Stock Rubber Tail Housing Mount (Not Included).
  • Features: | * Made From Heavy Gauge Steel Tubing | * Includes Mounting Hardware Pictured | * Black Powder Coated To Resist Corrosion.
  • Crossmember Specs: | * Overall Length: 33 1/8" | * Tube Length End-To-End: 29 3/8" | * Crossmember Tube Outside Diameter: 1 5/8" | * Mounting Hardware Specs: | * Four Mounting Bolts With Nuts And Washers, Crossmember To Fra....
Check Stock

System 3 SB-3 Beadlock 14x7 ATV/UTV Wheel - Matte Black (4/110) 5+2 [19-0077]

  • RockTrix Wheels Offroad ATV Rims - Fits machines with 4/156 Bolt Pattern and a hub bore no larger than 131mm. Works with various ATV, UTV, Side by Side, Quads. Verify fitment by checking that your machine's bolt pattern, center hole, and offset match that of our ATV wheels before making your purchase..
  • Compatible with Polaris: Sportsman X2 500 550 570 800.
  • Sportsman 300 400 450 500 570 600 700 800 ACE.
  • Ranger XP 700 800 900 1000, Ranger Crew 500 570 800 900.
  • Big Boss 250 400L 500 Please check the year and model in the description. Can fit many others, verify using the listed specifications..
  • This listing is for a set of Four (4) ATV Wheels RockTrix Rims - 12" Diameter, 4+3 Offset, 12x7 Size, 4x156 Bolt Pattern, 131 mm Bore. Four (4) RockTrix Center Caps. Valve Stems Not Included. All parts arrive packaged in one box..
  • Upgrade to these RockTrix aluminum single piece rims - light years ahead of factory steel rims. Precise, CNC Machined, solid 1-piece cast, lightweight aluminum wheels with a matte black powder finish. Topped with a high quality clear coat that is scratch, rust, and corrosion resistant....
Check Stock