Reviews Boiler Pipe Seamless Carbon Tube

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

Himesi DIY Professional Pipe Insulation Foam Tube 1/4',1/2',1',1-1/4',2' Outdoor Pipe Insulation Condensing Boiler Gas Insulation Pipe Heat Preservation Insulated,1pcs (Size : 2' x3/4' x6ft)

  • ✄【Material】- Rubber-plastic foam, good insulation, heat insulation, sound insulation, good vibration resistance.
  • ✄[Insulation] – Pipe insulation pipes are excellent at preventing pipe freezing and energy loss. Suitable for indoor and outdoor cold and hot water pipes, gas pipes, boiler pipes, heating pipes, steam pipes.
  • ✄[Anti-collision] – Foam tube storage can protect your pipes from bumps and scratches and is a good choice for extending the life of your pipes.
  • ✄[Weather Resistance] – Another common use of soft rubber foam is for various door sealing and window insulation.
  • ✄【Easy installation】 – Put it directly on the pipe, even if you are not a professional plumber, you can do professional water pipe insulation, saving labor and time.
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

  • WHY NEED IT -- The professional pipe bender kit can help you to bend the metal pipe easily, and the bending angle can reach 90 degrees. This pipe bender is powerful and has reverse pipe bending function. It is made of high-quality carbon steel and aluminum alloy, which is strong and durable. It is very helpful for your pipe bending work..
  • 7 PIPE BENDER HEADS -- Equipped with 7 sizes of pipe bender heads, suitable for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8", pipe benders The head can be replaced to meet more needs..
  • HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
  • EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
  • WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools an....
Check Stock

MTB Bicycle Suspension Fork 24 26 27.5 29 Inch 3K Carbon Bike Fork Straight Tube 1-1/8\ Disc Brake 700g

  • Name: Mountain bike 3K carbon fiber front fork，Disc brake, fork open file 100mm/3.9 inch, Weight: 710 - 810g ± 10g..
  • Material: T800 high modulus carbon fiber material and Aluminum alloy straight tube..
  • Specification: Ultra-lightweight Full Carbon. Weave: 3K. Finishing: Gloss. Standard: EN Standard..
  • The standpipe : 230mm length straight tube design, pipe diameter 1-1/8" (28. 6mm) disc brake, 9mm quick release..
  • For ：24"/26"/27.5"/29 inch Mountain Bike wheel ..
Check Stock

Copper Tube Cutter 3/16''-2'' Tubing Cutter for Copper, Pipe Cutter Tool, Brass, Aluminum, Thin Stainless Steel & PVC with Deburring Tool

  • 【Comfortable Design】The Pipe Cutter is attached with bearings, fitted on the roller to make the rotation more smoother and clean. Silica gel is added to the handle to maintain grip, so it is not easy to slip due to sweat on the hands. Bottom rotating knob adjusts the tube cutter to the proper fit in a seamless smooth movement..
  • 【Package Includes】LEMNISCATE Pipe Cutter Set includes 1 pc pipe cutter and a deburring tool is made of sturdy plastic surface and high-speed steel blade. It is able to clean the burrs on the pipe after cutting quickly. Receive 1 Replacement Wheels free when you purchase 1 or more Tube Cutters offered..
  • 【Multiple Applications】It is suitable for various construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage repair shops. Because of its light and small design, you can also put it in the tool bag and use it outside..
Check Stock

8MILELAKE Exhaust Tail Pipe Cutter, 3/4 Inch to 3 Inch Universal Tube Cutting Pliers Carbon Steel Chain Exhaust Cut Off Tool 15 Blades for cutting tailpipes and exhaust pipes both on and off the car

  • 【APPLICATION】The exhaust tail pipe cutter is designed for cutting tailpipes and exhaust pipes both on and off vehicle use. Use tool to cut copper, PVC, iron pipe, etc with diameters of 3/4 to 3 inches (19-76mm).
  • 【HIGH QUALITY】The chain muffler pipe cutter is made of high quality carbon steel, the surface has been anti-rust treatment and strict testing methods, strong , sturdy and durable, not easy to damage.The ergonomically non-slip handle of the exhaust and tailpipe tube cut off tool is made of plastic and steel and is comfortable while cutting..
  • 【HIGH PERFORMANCE】Universal carbon steel tubing cutter features with 15 blades to cut pipe quickly and effectively. Each roller has a cutting wheel that provides smooth tracking, so only a quarter turn is needed for complete cut..
  • 【PERFECT DESIGN】The exhaust tailpipe tube cutting Pliers works well in areas that are hard to reach, pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. Lubricating the cutting wheel of the exhaust cutter before use will make the cutting operation smoother and prolong the service life of the item..
  • 【SERVICE GUARANTEE】High quality products and services have always been our purpose. If you encounter any problems in the proces....
Check Stock

CATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition

  • Intake Pipe Valve Cleaning Machine -- An advanced equipment (3-Year Warranty) used to deeply remove highly sticky carbon deposits on the engine intake manifold and intake&exhaust valves. Regular carbon cleaning keeps the engine in healthy condition so as to provide high quality power continuously (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).
  • Working Principle of Engine Cleaner -- Close the intake valve and then spray walnut powder into engine intake via air pump, while it will recycle the walnut powder through vacuum. This is a closed loop. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. After thousands of impacts, carbon deposits will be clear thoroughly.
  • Safe & Efficient -- As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion different from a pollution-caused chemical intake valve cleaner.
  • Integrated Design -- Walnut sand can be sprayed and recy....
Check Stock

WORKPRO 2-Pack Pipe Clamps, Aluminum Die-casting Lightweight Tube Clamps for I.D 3/4'' Black Pipe, Firm & Stable Clamping with H-shaped Feet for Woodworking & Metalworking

  • 【Lightweight Construction】The pipe clamps feature lightweight construction by the application of high strength aluminium alloy, 50% lighter than conventional clamps made of die casting iron.
  • 【Firm & Stable Clamping】 With a high-pressure spring and four carbon steel sheets, the clamp makes firm & stable clamping and can hold pipes tightly to fix them in place as you need.
  • 【Ergonomic Handle】The handle features ergonomic design providing smooth rotary, comfortable hand feeling, easier clamping and thus reduce hand fatique.
  • 【Long-lasting Life】The thickened thread screw rod made of carbon steel is wear-resistant and the TPU protective cover can lessen damage to the clamps, thus provides longer service life.
  • 【Practical Application】The tube clamp's outer diameter is 1.05 in, which is suitable for inner diameter 3/4 in balck pipes and work as an ideal helper in woodworking and metalworking projects. Just slide the pipe clamp through any length 3/4 in. pipe to hold wood in place for gluing and drilling.
  • NOTE: 2 rings are used on both ends of the tube to prevent clamps from slipping off..
Check Stock

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock