Reviews Boat Bilge Pumps

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter：1 1/8\) (1100GPH)

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Manual Bilge Pump for Boats Kayak Canoe Hand Water Pump | Hand Pumps Siphon Pump Bailer Kayaking Boat with Hose Portable Held 20 Gallons Per Minute Suction Marine Grade Regular

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

NRS Kayak Bilge Pump One Size

  • The NRS bilge pump makes it easy to remove unwanted water from any open boat.
  • No hose necessary as the water will spray out over the side of your kayak or canoe.
  • The full length foam float ensures it won't sink if you drop it in the water.
  • Pumps 8 gallons per minute for quick emptying of your boat.
  • Bright color makes it easy to find, even in dim lighting.
Check Stock

Five Oceans Bilge Pump Three-Way Rocker Control Panel Switch with Circuit Breaker, Black, Automatic-Manual-OFF functions, LED light indicator, FO-3851

  • With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
  • PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
  • 3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
  • MANUAL position has spring back feature to prevent bilge pump from continuously running.
  • COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Legend Brands Un-Duz-It Bilge Cleaner, Perfect for Boats, Pontoons and other Marine Power Systems, Fresh Lime Scent, 32 Fl. Oz.

  • Marine Bilge Cleaner: Legend Brands’ Bilge Cleaner is an excellent biodegradable cleaning solution for greasy and tough motor oil, grease, transmission fluids and the associated scum and sludge that collect in the bilge..
  • Boat Bilge Cleaner: This boat cleaner can easily clean large boats up to thirty feet long, and removes up to one quart of motor oil effortlessly. One application of this grease remover knocks down odors and leaves behind a fresh lime scent!.
  • Bilge Fluid Cleaner: Our cleaning experts have formulated this no-hassle bilge cleaner that makes cleaning your bilge easy and efficient! Just pour it in, add several gallons of water, go boating and then pump it out..
  • True Marine Bilge Cleaner: This boat cleaning solution is phosphate free, chlorine free and ammonia free! The bacterial enzyme cleaning solution is a safer solution – it won’t harm fiberglass, rubber, metal, plastic or wiring..
  • Boat Cleaning Solutions: This grease removing solution is a True Marine product, which means that it can be confidently used in the marine environment. Total Volume: 32 Fl. Oz..
Check Stock

creatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump

  • 【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
  • 【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
  • Turn pump off when water level reaches 3/4″(19mm)..
  • 【Performance】:Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • 【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • 【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..
Check Stock