Reviews Blow Butterfly Valve

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

Perfect Sealing Turbo Blow Off Valve Adapter BOV 2016+, Turbo Blow Off Valve Adapter Rustproof for Ford F-150 2.7L 3.5L

  • Fitment: Due to the original factory standard, turbo blow off valve adapter is replacement for Ford 2.7L 3.5L EcoBoost models 2016+..
  • Installation Position: Turbo blow off valve flange can be installed between the OEM bypass valve and the flange on the intercooler..
  • Rigorous Testing: Exquisite and careful workmanship, extensively tested for quality and safety performance, dependable replacement part..
  • CNC Aluminum: Blow off valve adapter is made of CNC machined billet aluminum material, for maximum strength and long lasting durability..
  • Application: Turbo BOV adapter is specially designed for racing drivers, allowing air pressure to be discharged into the ..
Check Stock

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

4 Pieces 1/4 NPT Lever Blow Gun Air Nozzle Blow Gun Dust Cleaning Blower Gun with Rubber and Safety Tip Nozzles Blow Gun Air Tool for Home Shop Garage Industry

  • ...clear internal threads that are easy to install.
  • Detachable design: the air blow gun is detachable, and the safe rubber tip can be removed according to actual needs, which is easy for you to clean and store and brings you more convenience.
  • Easy to operate: simply press the stem to vent gas and gently loosen the thumb valve control to close the air nozzle blow gun.
  • The comfortable rubber thumb lever valve is easy to control during use.
  • The lever air blow gun with a rubber tip is suitable for home garages, stores, factories, industrial facilities and other places.
  • Versatile blow gun: the blow gun air tool can remove dust, powder, debris, water and dry liquids.
  • With this air nozzle tips blow gun, it is easily to clean hard-to-reach corners such as narrow gaps, heights, trachea and machine parts, etc..
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

Hausse Heavy Duty Air Compressor Accessory Kit, Air Blow Gun and Air Hose Fittings, 1/4\ NPT Air Tool Kit with 116 PSI Rubber Hose Tire Inflator Gauge

  • Tire Inflator with Gauge: Tire inflator with ventilation valve and pressure gauge, air blow gun are all combined in one easy to use unit. Clear and easy to read display dial with 0-220 psi gauge (No more than 140 PSI is recommended). Heavy duty metal construction that is corrosion-resistant and very durable..
  • Multipurpose: PSI measurements can be clearly displayed even when not connected to the air compressor. The vent valve can release excess air without removing the chuck of the tire stem..
  • Standard Blow Gun with Nozzles: All metal construction standard air blow gun with 1 nozzles and 2 inflation needles, all-purpose use for bicycles, air mattresses, balls, etc..
  • Great Air Compressor Kit: Applicable to all you need to start your project. The inflator can be connected to any 1/4 Inch NPT air compressor output to quickly inject optimal pressure to the tire..
  • Set Contents: 1 air blow gun and 2 nozzles, 1 Filling gun with valve connector hose, 7 adaptors plus adaptor attachment..
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ...heat roofing materials, and preheat metals for welding and soldering.
  • The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
  • [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Cla....
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

HQMPC RV Winterize Adapter Blowout Adapter 1/4

  • After sale service: If you have any questiosn fit our products, please contact service team, we will solve problems in time..
  • Easy operation quick adapter fitting, screw the water lines to the female or male threading side, then connect the quick plug to an air compressor line’s female quick coupler. Turn on the air compressor, rotate around ball valve’s stem to open/close and modulate the air flow velocity to blow out the water from the water lines..
  • Standard threading connector, 1/4″ quick connect air plug with 3/4″ GHT (male and female) Valve.
  • Products use:This Winterize Blowout Adapter Connected with air compressor to press out the hose line water aviod inside water blow out the water line in winter , irrigation systems, RV, travel trailer, boat, camper, cabins, faucets, garden hoses.
  • Packing Including: One Pcs 1/4″ Quick Connect Plug With 3/4″Female Valve,One Pcs 1/4″ Quick Connect Plug With 3/4″Male Valve, 4 Gaskets +1 Seal Tapes.
Check Stock

NNiKQ Blow Off Valve Noise Turbo Sound Whistle Simulator Muffler Tip Car Accessories D

  • 【Made of high-quality aluminum】lightweight and durable. Easy to install on the car's tailpipe. If the car is installed in the tail throat and does not sound, it may be that the airflow of the car is not large enough and not concentrated enough to blow the whistle. You can install it outside and use the wind. Because the airflow of the wind is larger than the airflow of the car, it is easier to blow up..
  • 【Sound】Use a turbine system or a blow valve to make your vehicle sound like a turbocharged vehicle..
  • 【Wide range of applications】Make your vehicle sounds like a turbo vehicle with the turbo system or blow-off valve. Applicable to all kinds of cars, motorcycles and racing cars..
  • 【Easy to install】Universal Fits for all vehicle..
  • You Will Get】Aluminum turbo sound simulator whistle x 2 & 100% Satisfied guarantee..
Check Stock