Reviews Block Cylinders

DE-STA-CO 8315 Pneumatic Swing Clamp

  • Largest in our series of block mounted pneumatic swing cylinders.
  • Supplied with magnetic ring for position sensing.
  • Useful in secondary manufacturing operations.
Check Stock

Chevrolet 2008 Engine, 2.9L, Complete Engine, Long Block Engine, 300-5029

  • Chevrolet 2008 engine 2.9L, complete engine, chevrolet long block engine.
  • Year:2008, Mpn:300-5029, Type:With Accessories, Fitment Type:Direct Replacement, Country/Region Of Manufacture:United States.
  • Mileage:47,733, Condition And Options:2.9L (VIN 9, 8th digit, opt LLV), Warranty:60 Day, Fuel Type:Gasoline, Core Charge:No Core.
  • Brand:CHEVROLET, Model:COLORADO, Manufacturer Part Number:300-5029, Engine Size:2.9L, Number Of Cylinders:4, Vin#:1GCCS149288171125.
Check Stock

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability..
  • Highly corrosion-resistant interior and exterior—ideal for wet gases.
  • Cylinders perform well at low temperatures..
  • Lightweight––up to 40 percent lighter than comparable steel cylinders..
  • Cylinders meet or exceed all regulatory standards worldwide..
  • Luxfer’s exclusive “Safety First” training program that provides manuals, inspection guides, safety bulletins, reference materials, shop posters, videos and other training materials free of charge to promote safe use, storage and inspection of aluminum beverage cylinders. Consistent with Luxfer’s position as the world’s leading manufacturer of high-pressure aluminum gas cylinders, educational offerings are available in multiple languages and formats..
  • Cylinders cycle-tested in excess of 100,000 cycles at service pressure..
  • Minimum burst pressure tested to 2.5 times service pressure without failure....
Check Stock

MOSTPLUS 11127522159 Engine Valve Cover w/Gasket Hardware LH Driver Side Compatible for BMW 5 6 7 Series X5 Cylinders 5-8

  • Fitment: Compatible with 2004-05 BMW 545i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 550i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2004-05 BMW 645Ci Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 650i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745Li Driver Side Cylinders #5 - 8 Valve Cover.
  • Package Includes: 1 x Engine Valve Cover Set(.
Check Stock

Build 19 Piece Pneumatic Kits with Technik Parts Contains Air Pump, Piston Pressure Rod, Cylinder,Pneumatic Hose &More,Great for DIY, MOC Tech, Compatible with Lego

  • Custom MOC Tech Accessories: The kit contains 10 pneumatic accessories for a total of 19 pieces. There are 2 2x11 V2 cylinders, 2 1x11 V2 cylinder air pumps, 2 1x5 cylinder V2 pressure rods, 2 1x6 air pumps, 2 pneumatic switches, 2 pneumatic spring air pumps, 2 7L atmospheric pistons, 2 square floor air pumps , a 2m long pneumatic hose with 4mm outer diameter, 2mm inner diameter and 2 push rods. Note: Tube color is random..
  • The technical parts are well sealed and airtight. The quality of the parts is comparable to the famous Danish building blocks..
  • The MOC small particle building block kit is used to realize the hydraulic action at night and control the turning, grabbing, lifting and other functions of cranes, trucks, various engineering vehicles, military trucks, airplanes, robots and other models..
  • We know that a perfect building block starts with the quality of the raw materials. The pneumatic kits are made of high-quality environmentally friendly ABS materials, and the building block parts are smooth and polished, so that each part fits well and has a smooth and comfortable grip, which is not easy to loosen. Compatible with other brands of small particle blocks..
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

Belinlen 10 Pack Plastic Cylinders and Beakers Set, Including 5 Pack Clear Plastic Graduated Cylinders (10, 25, 50, 100, 250ml) and 5 Pack Plastic Beakers Set (50, 100, 250, 500, 1000ml)

  • Package Contains: 16 Pack Cylinders and Beakers Set. (5 sizes clear plastic cylinders, 5 sizes transparent plastic beakers, 5 Transfer Pipettes and 1 Test Tube Brushes)..
  • Size detail: plastic cylinders set- including 10, 25, 50, 100, 250ml, and plastic measuring cups-including 50, 100, 250, 500, 1000ml. Transfer Pipettes: 3ml..
  • Material: made of food grade thickened pp plastic, more resistant to corrosion, non toxic, durable and safe to use..
  • Special design of clear graduated lines on both cylinders and beakers which help you easily measure liquids while transferring them..
  • These cylinders and beakers sets are perfect for homeschool science experiments, students or tearchers doing chemical experiments in the lab, also great for kids Halloween costume. Nice not having glass to worry about breaking..
Check Stock

Coleman Propane 16 Oz Camping Cylinder 12 Pk

  • This product is hazardous/flammable and not returnable.
  • Pre-filled propane cylinders with quality steel construction, a stable base and reliable valves provide safe and easy-to-use operation. Cylinders are....
Check Stock

WORTHINGTON 310805 16.4 Oz Propane Cylinder Disposable

  • This product is hazardous/flammable and not returnable.
  • Pre-filled propane cylinders with quality steel construction, a stable base and reliable valves provide safe and easy-to-use operation. Cylinders are....
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • ...he product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button..
  • MECHANICAL STRUCTURE: Clamping unit of extrusion blower moulding machine is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted w....
Check Stock