Reviews Blade To Cut Hardie Board 2

DEWALT ATOMIC 20V MAX* Circular Saw, 4-1/2-Inch, Tool Only (DCS571B)

  • Brushless motor of DEWALT circular saw allows you to cut up to 369 linear feet of 3/4-inch OSB using DCB205 battery (sold separately).
  • The cordless circular saw has the removable auxiliary handle for increased control.
  • The compact circular saw has a hang hook for increased convenience.
  • On-board blade key storage for hassle free blade changes.
  • 1-1/2-inch finger trigger allows users to choke-up on tool if necessary for their application.
  • Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2-inch blade.
  • Electronic blade brake stops blade quickly for safety and productivity.
  • Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)

  • Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
  • High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
  • Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check Stock

JINSEY Make Your Own Stencil - 10 Pack 6 Mil 12 x 12 inch Blank Stencil Sheets - Ideal Use Compatible & Silhouette Machines (White)

  • ... what I was looking for! I have a Cricut Air Explore 2 and these are the settings I used. Choose custom material. When the screen pops up with choices choose view all. Bottom left corner click material settings..
  • Find transparency and click the edit button. Change pressure to 330 and number of passes to 2. Fine cut blade and standard grip mat. Works like a charm!.
  • Once you edit the settings they will remain as your default settings anytime you choose transparency..
  • What setting would i have to use for a cricut explore air in order to cut this material? do i need a deep cut blade?.
  • Hi, I have the Cricut Explore. I cut on the cardstock setting with the regular blade. Works like a charm. :).
  • What are the exact cut settings, blade, speed?.
  • I have a cricut air and i put mine on posterboard and use a fine point blade. Cuts great..
  • NOTE: Here is the instruction in youtube you may interest: www(.)youtube.com/watch?v=a2sXPByAt7A&t=1006s.
  • For the Silhouette Cameo, this is what works for me: Open the Cut Settings tool (right) and from the material list pick "Clear Sticker Material." Blade on 3, Speed 2, Thickness 33, Double cut..
  • What is the optimal settings to cut for stencils using cameo 3? I'm....
Check Stock

RIKON 7in. Wet Tile Saw

  • RIKON 14-700 7" Wet Tile Saw makes straight, angle, and bevel cuts in man-made tile, pavers and stone tile products. Features two-position beveling.
  • built-in water reservoir with drain plug to enable filling and no-spill emptying.
  • Cutting Capacity: 1-1/4" (32mm) maximum depth of cut at 90.
  • 9-1/4" (235 mm) maximum cut to right of blade.
  • 9-1/4" (235 mm) maximum cut to left of blade.
  • table bevel (2) 22.5 degrees & 45 degrees.
Check Stock

GALAX PRO Saw Blade Set, Pack of 4 Assorted 60T HSS Metal/24T TCT Wood/Diamond 4-1/2-Inch Circular Saw Blade with 3/8\ Arbor for Fast Cutting…

  • Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
  • High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
  • Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check Stock

Cricut Maker and Explore Air 2 Blade Accessories Kit: Variety (3) GripMats, and Pen Set Bundle

  • EXPLORE AIR 2 and MAKER SUPPLIES: With the Premium Fine-Point Blade + Housing, Deep-Point Blade + Housing, and Bonded-Fabric Blade + Housing, make projects with permanent vinyl, cardstock, faux leather, iron-on fabric, heat transfer vinyl, and more! Use the Everyday Pen Set to write calligraphy style word art, cards, thank you notes, gift tags, and even wedding reception tabletop decor. A variety set of 12x12in GripMats to hold light, delicate material to thick, heavy material..
  • MULTI PEN SET: Cricut Explore Pens, Multi Pen Set in Black allows you to write personal messages in cards and invites in beautiful style or draw perfect shapes or coloring pages..
  • DIE-CUTTING MACHINE BLADES: Premium Fine-Point Blade cuts lightweight to medium weight materials, including cardstock, vinyl, iron-on, and poster board. Explore Deep-Point Blade cuts thick materials such as poster board, heavy cardstock and specialty papers! Bonded Fabric Blade is designed to cut fabric backed iron-on material and other bonded fabric materials. Variety GripMat Set works with included blades. GripMat Set includes Light, Standard, and Strong adhesive cutting mats..
  • BONUS: A Getting Started Guide is an electronic format e-book that is perfect for any beginner Cricut Explore Air 2 or Cricu....
Check Stock

Makita XDS01Z 18V LXT Lithium-Ion Cordless Cut-Out Saw, Tool Only

  • Makita-built variable speed motor delivers 0-6,000 strokes per minute for faster and more efficient cutting.
  • Designed to cut openings in installed board with an adjustable blade depth up to 1-3/16" (9/16" in wood).
  • Cuts up to 984 feet of 1/2" drywall on a single charge using 4.0Ah battery BL1840B (battery not included).
  • Short 1/4" stroke length with adjustable blade depth helps prevent damage to objects behind the board being cut.
  • Clear dust box for dust containment with increased visibility for operator convenience.
Check Stock

DIYSELF 2Pack Utility Knife Box Cutter Retractable Blade Heavy Duty(Black)

  • WHAT YOU WANTED: Economical and disposable box cutting blades.Comfortable grip and wider retractable blade..
  • WIDELY USED：Ready to use, cut and toss or keep some around as a spare utility knife in your garage, tool kit, home and office..
  • MORE WIDER BLADE - Heavy Duty Ideal for Thicker Cuts. Use for commercial or industrial applications like thicker paper, tape, plastic, cardboard, balsa, bass wood, photos, coupons, cardstock, mat board, foam board, delicate fabrics, crafts, amazon, ups or post office packages..
  • EFFICIENT & EASY:18mm wider blade for deep and easy cutting. Prevent blade slipping with the lock tab. Always keep your blade fresh and sharp by snapping off the blade for a new sharp cutting tip.
  • PACKAGE CONTAINS: 2-piece heavy duty retractable box cutters. The utility knife has 8 different colors among which black, blue, green, orange, pink, red, silver and yellow. Please choose the one you prefer..
Check Stock

Jigsaw, Orbital/Straight Cut, 800-2800spm

  • On-board LED light for increased visibility, on-board hex wrench for fast, accurate bevel adjustments.
  • Electronic variable speed control dial (800 - 2,800 SPM) maintains consistent speed throughout the cut.
  • 3 orbital setting plus straight cutting with powerful 6.3 amp motor.
  • Patented tool-less blade change system for fast and easy blade installation and removal, built-in dust blower.
  • Die-cast aluminum base adjusts up to 45 degrees right or left with a positive stop at 90 degrees.
Check Stock