Reviews Blade Mcpx Battery Connector

Blade Tail Rotor Hub Set: 200 SR X, BLH2020

  • Blade Helis is a United States based company.
  • This item works with: E-Flite Blade mCPx mCP X 2.
Check Stock

6pcs GNB LiPo Battery 1S 300mAh 3.8V HV LiHV 60c 120c Inductrix FPV BNF Blade RC Plastic Head PH2.0 Connector

  • 【Upgrade Version】Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7.
  • 【Small Size】Small size of 64 * 15 * 6 mm,The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it.
  • 【Better Performance】This 1S lipo tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops.
  • 【Longer Flying Time】Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
  • 【Caution】As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
Check Stock

Favrison Micro Parallel Charging Board for Pico / PH1S / PH2S / XH2S Types Battery with XT60 Plug

  • ✈Brand new micro battery parallel charging board is compatible with Pico /PH1S /PH2S /XH2S Type Battery. It can Charge up to 9 batteries at the same time.
  • ✈PICO(JST1.25) for Blade Inductrix/Tiny Whoop/Blade mCX/E-flite Ultra/Blade Nano QX/UMX Radian.
  • PH1s for mCPX/Nano QX 3D and other batteries with 1S PH balance plug.
  • PH2S for E-flite UMX series and other batteries with 2S PH balance plug.
  • XH2S for Trex 150 batteries and other batteries with 2S XH balance plug.
  • ✈The circuit is protected by self-resettable polyfuses and your batteries will be protected in cases of wrong connection. Please note that these fuses may lead a higher IR readout of your batteries, but will not affect the cutoff voltage.
  • ✈LED light indicates conductivity. The melting current of each resettable fuse is 1.25A. The maximum total charge current equals 1.25A multiplied by the number of batteries.
  • ✈Favrison promises to provide high quality products for customers. All our items will be strictly tested before ship to customers. If you meet any problem or are not satisfied with the micro battery parallel charging board, please feel free to contact us and we will offer you the best service and 100% money back guarantee.
Check Stock

Gaoneng 8PCS GNB 1S 3.8v HV 530mAh LiPo Battery 90C for PowerWhoop mCPX Connector EMAX Tinyhawk Brushless Drone Kingkong Tiny7 Beta75S

  • 【Specification】- Material: Lithium Polymer.
  • Max cont. Discharge: 90C, Max Burst(C-rate/current):180C..
  • 【Dimensions】- 60mm x 17mm x 6mm Appr.(L x W x H).
  • 【Application】- GAONENG GNB 530mAh HV LiPo Battery 90C/180C 3.8V is suitable for PowerWhoop mCPX Connector EMAX Tinyhawk Brushless Drone Kingkong Tiny7 Beta75S..
  • 【Voltage Note】- Be sure charging and use in safety. Do not leave when charging. In order to keep battery useful for long cycle life, do not overcharge more than 4.35V and do not over discharge below 3.4V..
  • 【What You Get】- 8 pieces GAONENG GNB 530mAh 3.8V HV Lipo battery. If you have any doubt, please don’t be hesitated to contact us, we will reply you within 24 hours..
Check Stock

Crazepony 4pcs 650mAh 1S Battery 3.8V/4.35V HV LiPo Battery JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone Like Mobula 7 Beta75Pro

  • This 650mah 1S lipo fit for Inductrix FPV Plus FPV Racing Drones.
  • Crazepony 1S Lipo Battery with the connector of JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX.
  • This Inductrix FPV Plus Battery discharge rate is 50C, Small size of 63 * 16 * 7 mm, Light weight of 13.68g, you can get 5-7 min of flight time and more power while staying at a suitable weight.
  • Newly developed chemistry 1S Battery, Much more Safer, higher quality and more powerful rate gives you higher speed flying experience.
  • Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction.
Check Stock

4pcs 520mAh 1S LiPo Battery 80C 3.8V HV LiHv Battery JST-PH 2.0 PowerWhoop mCPX Connector Upgraded for Inductrix FPV Plus EMAX Tinyhawk Micro FPV Racing Drone xt60 for Drone

  • Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, Eachine trashcan, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7.
  • This FPV 1S battery's discharge rate is 80C, Small size of 64 * 15 * 6 mm, Light weight of 13.42g/pc, you can get a long flight time and more power while staying at a suitable weight.
  • The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it.
  • Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
  • Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently. If you have any questions after receiving the package, please contact us as soon as possible.
Check Stock

4pcs 600mAh 1S 3.7V LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny Whoop FPV Racing Drone

  • ★Capacity: 600mAh 50C 3.7V,the 600mAh large capacity offers you a long flying time..
  • ★Light weight reliable,50C Discharge Rate,High-grade Lipo cell is highly reliable and durable for long-lasting use..
  • ★To fit for Mobula 7 HD Snapper7 Tinyhawk Freestyle Race Beta75 Pro Beta75S Eachine M80 Trashcan Kingkong Tiny 7 Inductrix FPV Plus 75mm FPV Racing....
  • ★The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop, mCPX..
  • ★Newly developed chemistry 1S Battery, Much more Safer, higher quality and more poewrful rate gives you higher speed flying experience..
Check Stock

UP-S6 1S LiPo Battery Charger LiPo/LiHV Charger for Blade Inductrix Tiny Whoop mCX mCPX Micro Losi Connector

  • [6-in-1 Independent Ports] - This lipo battery charger can use six independent ports at the same time. There are three different types of battery connectors for each port: Micro. MX, mCPX. Only charge 1S lipo batteries at the same time!.
  • [Adjustable current] - This 1S battery charger supports current adjustment from 0.1-1.0A, the charger supports LiPo battery charging and also supports LiHV battery.
  • [Multi-way charging sources] - UP-S6 1S LiHV battery charger equipped with USB port (5V/2.1A), can be used for charging iPad, mobile phone, digital camera, etc..
  • [Multiple Protections] - Lithium battery charger provides battery reverse polarity protection, battery overvoltage protection and DC input voltage protection to ensure your safety when using.
  • [Note] - If there is any problem with the product you received, please contact us as soon as possible, and the power adapter is sold separately!.
Check Stock

6pcs 350mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Micro FPV Racing Drone

  • High capacity of 350mah 30C, Small size of 6.5 * 11.5 * 71mm, is the great choice of Tiny Whoop.
  • The weight of the 350mah 1s 30C 3.8v hv lipo battery is approx 8.5g/pcs, 0.8g heavier than the 300mAh battery.
  • The battery connector is JST-PH 2.0, NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc.
  • This tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops.
  • Newly developed chemistry HV 1S Battery, longer flight time and safer charging situation. Safer, higher quality and more powerful rate brings you....
Check Stock

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

  • Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）.
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above.
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery).
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged..
Check Stock