Reviews Blade Finishing

Flawless replacement heads,Women Facial Hair Remover Replacement Heads Generation 1 for Finishing Touch Flawless Facial Hair Removal Tool for Face,Halo Painless and Smooth

  • [Fit for Most Hair Removal Heads ]: Facial hair remover replacement heads gen 1 are compatible with Finishing Touch Flawless Facial Hair Remover generation 1 only, Not for Gen 2, smooth finishing, and gentle touch. If you need hair remover replacement heads for your hair remover, our hair remover replacement heads will be a good choice for you..
  • [360 Degrees Without Dead Ends]: Small and discreet, like the original, it removes your facial hair smoother. It is recommended to replace the hair remover replacement heads every 3-6 months months for optimal performance..
  • [Prefect for Finishing Touch Flawless]: 18K gold-plated surface, a built-in stainless steel blade set, and the bottom interface is perfect for finishing touch flawless facial removal. It can easily remove facial hair without causing pain, facial infections and other problems..
  • [Easy to Use]: With a simple twist on and off design, the replacement blade head are easy to setup and use. The replacement Blade Head is recommended to replace the heads every 3-6 months for optimal performance..
  • [Easy to Use]: Just twist the old replacement head out, and then screw it back with the new replacement head.Simple operation, you don’t need to worry about it at all..
Check Stock

SUIZAN Japanese Wood Block Plane Kanna 1.7 Inch (42mm) Hand Planer Japanese Woodworking tools

  • JAPANESE SMOOTHING PLANE KANNA: Ideal Japanese type woodworking hand planer for surface finishing of wood. You can make smooth chamfers by polishing the wood with this handtool. Because the Japanese wood plane is used by pulling instead of pushing, it is easy to apply force evenly, and accurate and efficient straight carpentry work is possible. The tool is used for both professional carpenters and home DIY woodworkers..
  • CONVENIENT SPARE BLADE TYPE PLANE: It is a plane whose blade tip can be replaced. Sharpening is required to maintain the sharpness of the plane, but the replacement blade type does not require sharpening, so it is easy to use even for beginners. Even Japanese professional carpenters are choosing spare blade planes to increase work efficiency. Also, since a chip breaker (Osae-ba) can be attached to the main blade, there is no need to adjust it. It is designed to use a plane efficiently..
  • ESSENTIAL WOODWORKING TOOL: It is easy to pull stably with the moderate weight of the plane and can peel the surface of the wood as you adjusted the blade. It is ideal not only for general wood surface processing but also for fine adjustment of tight drawers and surface finishing of tabletops and wooden cutting boards, etc..
Check Stock

LEVEL5 40

  • PROFESSIONAL GRADE | Designed and built using nearly 20 years of input from professional finishers. Our tools are meant for reliable, daily use on the job site..
  • PREMIUM QUALITY | Strong and lightweight extruded aluminum black back, 0.3mm high-quality European stainless steel blades.
  • SUITES YOUR NEEDS | Grip with the blade back or attach one of three extendable LEVEL5 Skimming blade handles--whatever fits your finishing style.
  • BUILT TO LAST | Our tools are built for reliable, daily use on the job site.
  • GUARANTEED PERFORMANCE | Our finishing tools are developed by professionals for professionals and guaranteed to exceed your expectations. If for ANY reason you arent pleased with your purchase, returns through Amazon are easy.
Check Stock

Benchmark Abrasives 10' 60T TCT Wood Saw Blade for Finishing on Sliding Miter & Radial Arm Saws

  • SIZE – 10″ Blade Diameter, 60 Teeth, ATB Grind, 5/8″ Arbor, .094″ Kerf, MAX RPM = 6,700.
  • CROSSCUTTING & FINISHING – This wood cutting carbide saw blade is excellent for crosscutting and finishing of softwoods and hardwoods in a range of thicknesses, with occasional cutting of plywood, wood framing, decking, etc..
  • PREMIUM TUNGSTEN CARBIDE – The tungsten carbide tips are welded one by one to the tips of each blade in a fully automated manufacturing process..
  • SOLID STEEL CORE – Each of our wood blades is laser cut from solid metal sheets, not coil stock like other cheaply made blades. Benchmark Wood TCT blades are manufactured to exacting European standards..
  • SATISFACTION GUARANTEE – Benchmark Abrasives is proud to stand behind our products. If for any reason you are not completely satisfied, please contact us right away and we will make it right..
Check Stock

Japanese Style Plane Kanna 64mm Wood Block Carpenter Tool

  • WOODEN PULL PLANE KANNA: It is an ideal hand planer for surface finishing of wood. You can make smooth chamfers by polishing the wood with this handtool. Because it is used by pulling instead of pushing, it is easy to apply force evenly, and accurate and efficient straight carpentry work is possible. The tool is used for both professional carpenters and house DIY woodworkers..
  • TINY SMALL CURVED PRECISE PLANE: It is small and easy to hold, and the black ebony wood material gives it a sense of quality. Because the body of the plane is curved, it is ideal for finishing curved sections. It can be used not only for wood processing but also for leathercraft. It comes with a plastic safety storage case that is convenient for storage..
  • MINI QUALITY TOOL: The plane blade is razor-sharp and durable, it is possible to restore the sharpness by sharpening the blade with a whetstone. Also, the wooden body is heavy duty and excellent wear resistance..
  • OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included. The length of the blade is adjustable by screw..
  • PRODUCT SPECIFICATIONS: Body: Ebony wood / Blade: High-speed steel / Size: 1.0 x 3.5 x 0.9 inches / Cutting width: 0.7 inches / Weight: 2.4 oz / Made in China (Quality controlled by Japanese manu....
Check Stock

BHTOP Drywall Tools Skimming Blade with Extension Handle - 12", 22" & 32" Blades Extruded Aluminum 301 Stainless Steel Construction Tools End Caps, Wall-Board with 0.5mm&0.35mm Blue

  • ...rod length, and turn right to block. The total length can be 90.6 inch.0.5mm blade application range:High surface flatness, suitable for all kinds of construction sites with high requirements of flatness. 0.35mm blade application range: The surface is smooth and flat, with tiny slit. Suitable for all kinds of putty finishing leveling..
  • PREMIUM MATERIAL:Made of strong and lightweight extruded aluminum, our blade is very light weight but offers excellent strength and impact resistance for long-time use. They are built for reliable, daily use on the job site..
  • LIGHTWEIGHT DESIGN: BHTOP Skimming Blade profile provides a comfortable, ergonomic grip, fits securely into the handle adapter, ensuring there is no wobble during use. The handle is secured using button snaps..
  • WIDELY USED: Grip with the blade back or attach one of three extendable Skimming blade and the adjustable handle --whatever fits your finishing style. Perfect for covering up textured ceilings and walls..
Check Stock

ROK 6-1/2 inch Circular Saw Blade Set, Pack of 3

  • Bundle Includes 3 saw blades, Finishing Blade 40Teeth, Framing 18T, General Purpose Blade 24T.
  • Contractor quality Thin Kerf Teeth with carbide tips.
  • 5/8" Arbor, Fits most cordless circular saws.
  • Expansion slots to prevent blade warping.
Check Stock

BXGTECH Drywall Tools Skimming Blade with Extension Handle - 12", 22" & 32" Blades Extruded Aluminum 301 Stainless Steel Construction Tools End Caps, Wall-Board with 0.5mm&0.35mm Thickness blue

  • ...rod length, and turn right to block. The total length can be 90.6 inch.0.5mm blade application range:High surface flatness, suitable for all kinds of construction sites with high requirements of flatness. 0.35mm blade application range: The surface is smooth and flat, with tiny slit. Suitable for all kinds of putty finishing leveling..
  • PREMIUM MATERIAL:Made of strong and lightweight extruded aluminum, our blade is very light weight but offers excellent strength and impact resistance for long-time use. They are built for reliable, daily use on the job site..
  • LIGHTWEIGHT DESIGN: Skimming Blade profile provides a comfortable, ergonomic grip, fits securely into the handle adapter, ensuring there is no wobble during use. The handle is secured using button snaps..
  • WIDELY USED: Grip with the blade back or attach one of three extendable Skimming blade and the adjustable handle --whatever fits your finishing style. Perfect for covering up textured ceilings and walls..
Check Stock

4MAS Bullseye Zero-Gapped Finishing Trimmer (Black)

  • ZERO-GAPPED FOR PRECISION: Designed for extremely close trimming with clean, crisp lines for facial hair detailing and designs. Intended for professional use..
  • EFFICIENT ACCURACY: The 4MAS Bullseye Finishing Trimmer offers an appealing aesthetic in addition to impeccable precision with custom-faceted body giving you superior control..
  • RECHARGEABLE CORDLESS TRIMMER: Lithium-ion battery delivers over 100 minutes of nonstop run time.
  • charges in just 1 hour and can use with or without the cord..
  • ACCESSORIES INCLUDED: The 4MAS Bullseye finishing trimmer, 3 extra wide T-shape trimming guides (1 mm, 2mm, and 3mm), cleaning brush, blade oil, charger, and operating instructions..
  • PRODUCT SPECIFICATIONS: The 4MAS Bullseye trimmer measures just 6” long and weighs 8 ounces.
  • zero gap blade, rotary motor, a lithium ion battery that provides a 1 to 2 hour run time, and operates at 120V..
  • EASY TO CLEAN: Blades repel dirt, oil and build-up to help prevent irritation. For a simple cleaning, wipe it with a damp cloth, or use a brush on the blade for a deeper clean, firmly holding its base to ensure it stays in place....
Check Stock

KAKURI Chamfer Plane for Wood 30, 45, 60 Degree Adjustable, Japanese Hand Plane KANNA WoodWorking Edge Corner Plane, Edge Trimming Chamfer Tool, Razor Japanese Steel Blade & Oak, Made in JAPAN

  • JAPANESE WOODEN PULL PLANE KANNA: Ideal Japanese type woodworking hand planer for surface finishing of wood. You can make smooth chamfers by shaving the wood with this handtool. Because the Japanese plane is used by pulling instead of pushing, it is easy to apply force evenly, and accurate and efficient straight carpentry work is possible. The tool is used for both professional carpenters and home DIY woodworkers..
  • ESPECIALLY FOR CORNER EDGE FINISHING: As it is a special plane with a triangle guide, you can make a clean surface neatly to the corners of the wood. The guide angle is changeable easily with a screwdriver. By changing the mounting angle, uniform grinding is possible at 30, 45, and 60 degrees..
  • TOP QUALITY JAPANESE WOODWORKING TOOL: Only Japanese high-grade materials are used. The plane blade is razor-sharp and durable.
  • it is also possible to restore the sharpness by sharpening the blade with a whetstone. Also, the wooden body is Japanese oak that is heavy-duty and has excellent wear resistance. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen..
  • OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included. The length of the blade is adjustable by hand with an attached screw. Fine ....
Check Stock