Reviews Birth Control Injection

NutraBlast Disposable Vaginal Contraceptive Gels & Cream Applicators with Dosage Markings 15-Pack | Individually Wrapped | Made in USA

  • Plan B must be taken within 72 hours (3 days) after unprotected sex or birth control failure. The sooner it is taken the better it works ..
  • You can find Plan B yourself in the Family Planning aisle at all major retail stores. There is no prescription or ID required to purchase Plan B in....
  • Plan B works by temporarily delaying ovulation. Plan B won't work if you are already pregnant and won’t impact an existing pregnancy..
  • It should not be used as regular birth control.
  • Plan B will not impact your ability to get pregnant in the future..
Check Stock

Biotek Dispense Bottle Fluid Inlet Screen

  • Remote control and nonrotating plunger eliminates vibration allowing precise injection minimizing possible cell rupture.
  • Selectable Injection Volumes: from 2.3 nanoliters to 69.0 nanoliters in 16 increments.
  • Supplied with sufficient N-51-A glass capillaries for preparing 400 injection tips, standard softening point 780 degree C.
  • Can be mounted on most micromanipulators, the universal adapter is now included with the nanoject.
Check Stock

E-Con Morning After Levonorgestrel 1.5mg Emergency Contraceptive 1 Count 1 Pack

  • Morning After Pill: This tablet reduces the chance of pregnancy after unprotected sex (if a contraceptive failed or if you did not use birth control)....
  • No Prescription Needed: Taken as directed, it can significantly decrease the chance that you will get pregnant.
  • One Tablet, One Step: This emergency contraception delays ovulation using a higher dose (1.5mg) of a commonly used active ingredient (Levonorgestrel)....
  • For Emergency Contraceptive Use: Will not affect a pre-existing pregnancy.
  • Not to be used as a form of regular birth control.
  • Reduce the Chance of Pregnancy: For most effective use, take immediately following unprotected sex and up to 72 hours after.
Check Stock

JDMON Compatible with FICM 6.0 Powerstroke Fuel Injection Control Module Ford F250 F350 F450 2003-2007 Excursion 2003-2005 E350 2004-2010 Replaces 904-229 1845117C6 3C3Z12B599AARM 4C3Z12B599AARM

  • Compatible with FICM Ford F250 F350 F450 F550 6.0L 2003-2007，E-350 E-450 Super Duty 2004-2010，Ford Excursion 6.0L 2003-2005，Ford E-350 Club Wagon 2004-2005.Please use the fitment in the upper left corner to check if your vehicle is compatible with the product..
  • REPLACE PART NUMBER:904-229,3C3Z12B599AARM,4C3Z12B599AARM,4C3Z12B599ABRM,4C3Z12B599BARM,5010121R94,1845117C2,1845117C6.Direct replacement of the truck's original fuel injection control module.Easy-to-install, plug and play repair solution-no programming necessary..
  • REPLACE FUEL INJECTION CONTROL MODULE: If your vehicle has a fuel injection fault code. It may be necessary to replace your fuel injector control module （FICM）. After replacing it, you can make your 6.0 Powerstroke truck run normally..
  • HIGH QUALITY:Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance。100% re-welding of key components ensures excellent electrical connections, extending the life of the fuel injection control module..
  • QUALITY SERVICE:We are committed to providing every buyer with a good shopping experience. If you have purchased our products. Please feel free to contact us if you have any questions. We will do our best to solve them for you..
Check Stock

7.3L Fuel Injection Pressure Regulator Sensor, IPR Valve & ICP Control with Electrical Connector Pigtail Wire Harness Sensor for Ford F-250 F-350 F-450 F-550 F-650 F-750 E-350 E-450 E-550, 1829856C91

  • ...2, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We will reply to you within 24 hours.
Check Stock

29G 1/2' 1CC (Box of 100)

  • Sharp Needle Syringe For Comfortable Injection: EasyTouch diabetic needles are made with surgical steel, film-coated, tri-bevel cut, and electro-polished to remove burrs, creating one of the sharpest insulin needles on the market, per STR Labs.
  • Easy-Flow Injection Syringe: Utilizing thin-wall cannulas, EasyTouch diabetic syringes feature a thinner wall that reduces the required plunger force and helps large insulin doses flow easily for a smoother, more comfortable injection.
  • Better Barrels: EasyTouch insulin syringe barrels are lubricated, boldly marked, and have pronounced flanges to support a smooth and secure injection.
  • Quality You Can Trust: EasyTouch syringes with needle are manufactured according to MHC Medical Products’ FDA 510K to allow for the control of each component and ingredient, from the insulin needles' grind to the barrel markings.
  • Our Promise: MHC Medical Products stands behind its products with a simple promise: Quality you can trust and comfort you can feel.
  • if you're not satisfied, let us know, and we'll make it right.
Check Stock

MedtFine Insulin Pen Needles (32G 4mm)

  • Sharp Needle Syringe For Comfortable Injection: EasyTouch diabetic needles are made with surgical steel, film-coated, tri-bevel cut, and electro-polished to remove burrs, creating one of the sharpest insulin needles on the market, per STR Labs.
  • Easy-Flow Injection Syringe: Utilizing thin-wall cannulas, EasyTouch diabetic syringes feature a thinner wall that reduces the required plunger force and helps large insulin doses flow easily for a smoother, more comfortable injection.
  • Better Barrels: EasyTouch insulin syringe barrels are lubricated, boldly marked, and have pronounced flanges to support a smooth and secure injection.
  • Quality You Can Trust: EasyTouch syringes with needle are manufactured according to MHC Medical Products’ FDA 510K to allow for the control of each component and ingredient, from the insulin needles' grind to the barrel markings.
  • Our Promise: MHC Medical Products stands behind its products with a simple promise: Quality you can trust and comfort you can feel.
  • if you're not satisfied, let us know, and we'll make it right.
Check Stock

KICKER 2 45L7R152 15 3600w L7R Car Subwoofers+Vented Box+Amplifier+Amp Kit

  • .... 4 Spade Terminals. What's In The Box: (1) 15" Subwoofer.
  • (1) Owner's Manual. (2) Kicker Stickers. Features: KICKER 45L7R152 15" 1800 Watt L7R Car Subwoofer, Solo-Baric Sub 2-Ohm. RMS Power Handling: 900 Watts. Peak Power Handling: 1800 Watts. Dual Two-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals.
  • Sensitivity: 88.05 dB. Impedance: 2-Ohms. Mounting Depth: 8.38" inches. Mounting Diameter: 13.75" inches. Minimum Sealed Box Volume: 1.5 cubic feet. Maximum Sealed Box Volume: 3.0 cubic feet. Minimum Vented Box Volume: 3.0 cubic feet. Maximum Vented Box Volume: 6.0 cubic feet. Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owners manual. Mounting Screws. Warranty. RockvilIe dB16 8000 Watt/4000 Watt RMS Mono Class D 2 Ohm Car Stereo Amplifier With Optical Coupler Technology.
  • CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, RF Fosgate, etc.) - 2 Ohm: 2000 Watts x 1 Channel .
Check Stock

MedtFine Insulin Pen Needles (31G 8mm) 100pcs

  • Sharp Needle Syringe For Comfortable Injection: EasyTouch diabetic needles are made with surgical steel, film-coated, tri-bevel cut, and electro-polished to remove burrs, creating one of the sharpest insulin needles on the market, per STR Labs.
  • Easy-Flow Injection Syringe: Utilizing thin-wall cannulas, EasyTouch diabetic syringes feature a thinner wall that reduces the required plunger force and helps large insulin doses flow easily for a smoother, more comfortable injection.
  • Better Barrels: EasyTouch insulin syringe barrels are lubricated, boldly marked, and have pronounced flanges to support a smooth and secure injection.
  • Quality You Can Trust: EasyTouch syringes with needle are manufactured according to MHC Medical Products’ FDA 510K to allow for the control of each component and ingredient, from the insulin needles' grind to the barrel markings.
  • Our Promise: MHC Medical Products stands behind its products with a simple promise: Quality you can trust and comfort you can feel.
  • if you're not satisfied, let us know, and we'll make it right.
Check Stock

KOUGER De-ntal Flexible Denture Machine 110V 400W Lab Equipment Electric hydraulic press Dentistry Injection System

  • ♛ BASIC INTRODUCTION - Den-tal Denture Denture Machine is a 400W/110V den-tal denture laboratory equipment used to make flexible removable partial dentures..
  • ♛ HIGH PERFORMANCE AND HIGH EFFICIENCY - The denture injection system is easy to operate, has a long service life, low maintenance cost, and high success rate. The Den-tal laboratory equipment of the denture injection system is essential for dentists..
  • ♛ SIMPLE OPERATION - simple operation, time-saving and high casting success rate. Ordinary gear boxes can also be injection molded..
  • ♛ PRODUCT COMPOSITION - Den-tal denture injection device consists of heater and hot press. Heater: temperature control, timer and electrical system. Hot press: frame, roller, heater, bracket and flask..
  • ♛ PACKAGE SIZE - 40*34*57cm (15.7x13.3x22.4 inches), gross weight: 30kg (66.1 pounds)..
Check Stock