Reviews Binding Machines High Speed

HOUYEE 200 Pack 19 Ring Plastic Binding Combs,5/16 Inch Diameter,40 Sheet Capacity,Letter Size Comb Binding Spines

  • QUALITY MATERIAL – Each binding wire offers security and durability at an affordable price. These wires are perfect for reports, presentations, calendars, sketchbooks, as well as other binding projects that require an additional level of sophistication..
  • 11†LENGTH - These wires are designed to be used with Letter sized documents. However, they can also easily be cut with wire cutters to accommodate books with spines smaller than 11 inches in length. When cut, they can then be used with a binding machine equipped with disengaging pins..
  • 3:1 PITCH – These twin loop wires have 3 holes per inch and 32 total loops..
  • SHEET CAPACITY – These wires hold approximately 80 sheets of 20# paper, with a maximum binding capacity of 3/8 inch in thickness..
  • COMPATIBLE MACHINES - Twin loop wires can be used with a 3:1 wire binding machine or any wire closer. They are fully compatible with all standard wire binding machines..
Check Stock

HOUYEE 100 Pack 16 Mil Sand-Textured Polycovers,Binding Presentation Covers for Business Report 8.5x11 Inches,Letter Size

  • Size: Each binder cover is 8-1/2 x 11 Inches, pack of 100.
  • Thickness: 16 Mil. Each report back cover is made from high-quality opaque polyethylene that will hold up against frequent use..
  • Durable plastic protects bound documents from spills and tears.
  • These binding presentation covers are compatible for most binding systems, do not use with thermal machines.
  • These binding covers are a great choice for school projects, business proposals, reports, menus and any other occasions.
Check Stock

Generator Speed Controller Electronic Engine Speed Controller Governor 3044196 Generator Speed Control Board 1KHz~6.5khz

  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine..
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on..
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines..
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz..
Check Stock

DC Moter, DC12V Adjustable Speed DC Motor 180W Permanent Magnet DC Motor 2000RPM with Bracket (DC 12V 2000RPM)

  • [Excellent performance]: Permanent magnet DC motor drive is super stable, low noise, safe to use and stable in operation..
  • [Optional specifications]: Permanent magnet DC motors are available in two specifications, the rated voltage is optional 12/24 (V), with a high speed of 3500/6000rpm and a larger torque..
  • [Support CW / CCW rotation]: This high-speed DC motor can support CW / CCW rotation, and the speed is adjustable..
  • [Hollow shaft design]: The DC motor adopts a hollow shaft design. The fishing line can pass through the hollow shaft, which is very suitable for floating fish..
  • [Wide application]: This DC motor can be widely used in lawn mowers, polishers, cutting machines, electric drills, cotton candy machines, small generators, winding machines, bag cutting machines.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-20 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

20 Pcs Cinch Wire Binding Twin Loop Wire Binding Spines Double Loop Wire Binding Rings Spiral Binding Coils for Teacher Student Document Notebook Making File Organization (Fresh Colors, 9/16 Inch)

  • ...s to accommodate spines of different sizes, and can be easily assembled by pointing the coil at the hole in the page and pressing in.
  • Wide Usages: our double loop silver coil binding spines can be applied with 2:1 wire binding machine or any wire closure.
  • They are fully compatible with various standard wire bundling machines for easy binding.
Check Stock