Reviews Billet Casting Heater

Songbird Essentials SE7034 8 oz Bird Bath Protector (Set of 1)

  • ...ly prevent water from freezing and does not heat the water. Low power consumption ensures safe use and save the environment and electricity..
  • ✅ 【Waterproof & Leakproof Design】-- The birdbath water heater is made of heavy duty & durable cast aluminum protecting against any rust, cracking. The heating element is casting resin insulated and protect birds from scalding by the heating element. And the heater has smooth surface is easy to clean..
  • ✅ 【With Longer Cord 3ft】-- Our UL-listed PVC cords with thicker wire diameters, which can use safty in winter. It is safer and more reliable compared with the thinner. This Longer Cord were developed based on consumers' feedback. (3.3ft cord)it is more longer than other's..
  • ✅ 【Easy to Use & Works Well】-- Just put the heater in the center of birdbath and covered with water/ice.And plug it into a grounded receptacle outlet and working, plug and play! You can use this bird water heater all winter and this heater works great..
Check Stock

KOUGER De-ntal Flexible Denture Machine 110V 400W Lab Equipment Electric hydraulic press Dentistry Injection System

  • ♛ BASIC INTRODUCTION - Den-tal Denture Denture Machine is a 400W/110V den-tal denture laboratory equipment used to make flexible removable partial dentures..
  • ♛ HIGH PERFORMANCE AND HIGH EFFICIENCY - The denture injection system is easy to operate, has a long service life, low maintenance cost, and high success rate. The Den-tal laboratory equipment of the denture injection system is essential for dentists..
  • ♛ SIMPLE OPERATION - simple operation, time-saving and high casting success rate. Ordinary gear boxes can also be injection molded..
  • ♛ PRODUCT COMPOSITION - Den-tal denture injection device consists of heater and hot press. Heater: temperature control, timer and electrical system. Hot press: frame, roller, heater, bracket and flask..
  • ♛ PACKAGE SIZE - 40*34*57cm (15.7x13.3x22.4 inches), gross weight: 30kg (66.1 pounds)..
Check Stock

Streamline Billetanium Steering Stabilizer (Silver) for 99-08 Honda TRX400EX

  • Made of Heat Treated (Billet) Aluminum [6061-T6] / Improves stability in tight cornering / Easy Installation (fork shields/guards must be removed for install).
  • Manufactured using 100% CNC Machining / Reduces fork flexion / 5-piece design eliminates fork binding when installed.
  • No Casting or Molding are involved in the Manufacturing Process / This listing comes with: (1) Fork Stabilizer Brace with Stainless Steel Bolts.
  • Finished with Anodize Coating / Improves tire life and reduces cupping (uneven thread wear due to bouncing).
  • Reduces low and high speed wobbles / Decreases sensitivity to rough roads surfaces and rain grooves.
Check Stock

Electric Tankless Water Heater, Instant Electric Water Heater with Digital Display and Remote Control (RED)

  • ✔With temperature display, it can display the water temperature in real time, and the operation is simple and convenient.This heater does not need to be preheated, and uses water and electricity separation to heat, which is safe and reliable, and can be used at ease..
  • ✔The body has touch-screen buttons to adjust the temperature. The temperature range is 28-55 ℃, and the temperature can also be set by remote control..
  • ✔The inner liner is an aluminum casting heating body, with memory function, which can heat quickly, save electricity, water and have stable performance..
  • ✔Mini instant water heater, made of high quality materials, is durable, wear-resistant, corrosion-resistant and can be used for a long time..
  • ✔Built in real-time chip monitoring, with anti leakage protection, support post and shutdown protection functions..
Check Stock

Xcreando Large Epoxy Resin Molds Silicone Deep Hexagon Silicone Mold for Resin DIY Wedding Gift Dry Flowers Preservation Easter Decoration Candle Molds Desktop Organizer Chocolate Molds

  • Glossy Silicone Molds for Epoxy Resin:Package contains 1 pcs deep hexagon molds for epoxy resin which measure is 8.9inch*10.15inch*2inch,can accommodate more than 49.2oz of resin.Large enough to for preserve various items like dried flowers,shiny crystal,sample,Perfect for casting unique candle,chocolate,ashtray,cup mat,bookends etc..
  • Durable&Reusable Resin Accessories:This epoxy mold made of excellent elastic and odorless silicone,sturdy and durable.High tear strength and flexibility make it easy to remold.Suitable for casting resin and epoxy resin..
  • DIY Wedding Decoration:Preserving flowers in resin not only can establish your wedding to celebrate love and surprise your guests,but also save your bridal bouquet forever to keep special wedding memories.Wonderful wedding gift to show your best wishes..
  • Molds for Resin Casting:You can make yourself a resin decorations in few minutes at home.The process is simple,easy-to-use and fun,show off your own style.Also a great family project..
  • 100% SATISFACTION GUARANTEED:if you don’t love your resin mold or have any issues,please re....
Check Stock

iFJF 1R-0750 Fuel Filter and Refit Head and 12642623 Fuel Filter Head with Pump Replacement for GM Duramax V8 6.6L 2005-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD Replaces TP3018

  • Fits model:2005-2016 GM Duramax Chevy Silverado/GMC Sierra 2500HD 3500HD V8 6.6L Diesel Engine LLY/LBZ/LMM/LML..
  • Fuel filter cross reference:TP3018,TP3012,19305685,12664429,12633243,33960XE,LFF6012,1R-0750,BF7633,P551313,P551740,FF5320,MK13104,P8334,33528,CB01405912,LFF3347,3528..
  • 12642623 filter head:Made of billet aluminum,we used the electrophoresis process to treat the surface of the base,protect it from rust and dust.Also includes a heater plug.The aluminum air bleeder screw which replaced plastic OEM screw was more durable.The hand fuel pump and two tubes were made of iron..
  • 1R-0750 Refit Head:High-Flow,Increased Filtration and Lower Cost Filter Replacements,Billet Aluminum, Black Anodized CNC machined refit head designed to allow you to replace the poor-quality OEM filter with a superior quality spin-on filter element..
  • Upgrade:We improved the process of the refit head's bolt,you don't need to remove the check ball and spring in the 12642623 fuel filter head anymore before combine the head and filter..
Check Stock

Motorcycle Handlebar Ends - APE RACING Universal Billet Aluminum Bar End Cap Plugs Weights For 7/8\ bars or 1 1/8\ Fat Bars Fit Any Motorcycle Dirt bike Scooter with Hollow Handlebars

  • ✔️HEAVEY DUTY - Made by billet 6061-T6 aluminum with completely CNC machined and hard anodized. We DON'T USE CASTING aluminum..
  • ✔️UNIVERSAL FITMENT - TWO sizes of aluminum expansion tubes allow our ends fits wide range of motorcycles, dirt bikes and scooters whether they have 7/8.
Check Stock

ISSEVE Large Resin Molds, Heart Silicone Molds for Resin Casting, Epoxy Resin Molds for Flower Preservation, DIY Personalized Resin Crafts with Bouquet, Wedding Valentine Gift

  • ... 【Silicone Molds for Resin】- The resin silicone molds are made of durable silicone by advanced techniques.With the flexible, smooth and reusable epoxy molds, soft and light, you can use, de-mold and clean them easily. Due to the mold is large and deep, we recommend to pour the resin in layer or divide your casting process into several times helps avoid resin overheat issue. If you want to demold more easier, you can use mold release spray ro mild soapy water..
  • 【Preserve Special Bouquet or Record Wonderful Life Moment】- With ISSEVE large resin molds, you can DIY personalized resin art gifts or home decoration. Epoxy molds can use for many special occation bouquet flowers preservation, such as wedding bouquet, Valentine's Day flowers, graduation flowers, etc.
  • It also can used for recording wonderful life moment with your own photo, capture the important moment forever. Displaying the precious memory in your house,office or anywhere you want..
  • 【Suitable for Many Casting Materials】-ISSEVE silicone molds for resin are compatible with many casting materials, but not for coating resin. Great for embedding various items like dried flowers, photo, DIY u....
Check Stock

ISSEVE Large Resin Molds, Rectangle Silicone Molds for Resin Casting, Epoxy Resin Molds for Flower Preservation, DIY Personalized Resin Crafts with Bouquet, Best Wedding Valentine Anniversary Gift

  • 【Silicone Molds for Resin】- The resin silicone molds are made of durable silicone by advanced techniques.With the flexible, smooth and reusable epoxy molds, soft and light, you can use, de-mold and clean them easily. Due to the mold is large and deep, we recommend to pour the resin in layer or divide your casting process into several times helps avoid resin overheat issue. If you want to demold more easier, you can use mold release spray ro mild soapy water..
  • 【Preserve Special Bouquet or Record Wonderful Life Moment】- With ISSEVE large resin molds, you can DIY personalized resin art gifts or home decoration. Epoxy molds can use for many special occation bouquet flowers preservation, such as wedding bouquet, Valentine’s Day flowers, graduation flowers, etc.
  • It also can used for recording wonderful life moment with your own photo, capture the important moment forever. Displaying the precious memory in your house,office or anywhere you want..
  • 【Suitable for Many Casting Materials】-ISSEVE silicone molds for resin are compatible with many casting materials, but not for coating resin. Great for embedding various items like dried flowers, photo, DIY unique resin decoration, bookend,resin photo frame, home decors, DIY your own unique re....
Check Stock

Resin Heart Tealight Candles Holders Mold Set, 2pc Heart Shape Candlestick Silicone Molds for Epoxy Casting DIY Wedding Party Home Decor Unique Valentine’s Day Gift Wedding Party Home Table Decoration

  • ...r cots, 20 x wooden sticks.Great for DIY personality crystal tealight and candle holder for different occasions and festival!.
  • High-Quality Silicone Molds: These heart-shaped silicone molds are made of high-quality silicone with advanced technology, which is flexible and durable. Compatible with most resins or other casting materials, such as epoxy resin, UV resin, polyester resin, and the surface of finished products is very smooth, glossy and no micro-bubbles, and the wooden support help you easily make a perfect candle holder without deformation.The inside of the mold is smooth and easy to demold.
  • Romantic Warm Gift :Express Your Love to express your special feeling to your best friend,mom,wife.Heart candlestick epoxy casting silicone molds can be a great DIY decoration or gift.
  • You can DIY elegant and unique resin ornaments which can add sophistication to your home decor and brightened up your life. Heart ornaments silicone mold can be a great present for Engagement, Wedding, Anniversary, Bridal Showers, Valentine’s Day, Birthdays, Mother’s Day, Christmas, or other special occasions.
  • Widely DIY Application:These candle holder molds are suitable for most resins or other casting materials such as gypsum,epoxy resin, cement concrete, etc. You can ....
Check Stock