Reviews Big Diameter Seamless Pipe

IRONWALLS Commercial Grease Traps for 3 Compartment Sink 40LBS Stainless Steel Grease Traps for Restaurants Under Sink Grease Interceptor Oil-Water Separator with 3 Top Inlet & 2 Water Outlet

  • 【Product Specifications】Overall dimension:23.6" x 15.8" x 15.2" (60 x 40 x 38.5 cm, L * W * H). Inlet hole diameter: 1.77” / 4.5 cm. Water Outlet hole diameter: 1.38” /3.5cm(for pipe), 1.18”/3cm (for valve). Oil outlet hole diameter: 0.98”/25mm. Length of the threaded pipe: 80 cm / 31.5 Inches. Maximum capacity is 40 pounds. Flowing speed up to 13 Gallons Per Minute (G.P.M.).
  • 【Commercial Grease Trap with 3 Top Inlet】Designed with 3 top inlet holes, this restaurant grease trap can be connected to triple sink directly, convenient and efficient. Besides, this grease interceptor trap has 2 water outlet for drain out all water, easy for you to clean the water sink. Practical kitchen tools for busy restaurant kitchens, hotels, food trucks, canteens, cafe, home, etc..
  • 【Upgraded Drawer-like Filter Basket】No need to pull out inlet water pipe, no need to open the grease trap lid, you can easily clean up the solid waste by drawing out the filter basket on side, effortless and prevent the wasted water spilling out..
  • 【Premium Material】 This grease trap under sink is constructed by 1mm thickened stainless steel, which is anti-rust, anti-corrosion, sturdy and not easy to deform. The water pipe is made by heat-resistant steel wire, which is more....
Check Stock

YIYITOOLS PVC Pipe Cutters - Ratcheting Hose & Tube Cutter, Cutting 2-1/2” PEX, PPR, PVC Plastic Pipe, Suitable for Plumbers, Home Owner, Solar Company, Car Repair

  • Fitment：The PVC Cutter is Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair.Cuts Up to 2-1/2" Pipe Capacity.（When cutting PVC flexible pipe you should revolve the pipe whilst compressing）.
  • Big opening： AIRAJ PVC PIPE CUTTER can be used on a pipe diameter of up to 63 mm..
  • Material：The durable cutting machine is made of 4.0 thickened manganese steel, sharp, and the surface is polished. The blade body is made of die-cast aluminum alloy with good strength, good durability and toughness, and is not easy to rust..
  • Design：Ergonomic Grips on Bottom Handle, Delivers Fast and Easy Single Stroke Cuts, Faster Positioning with no Ratcheting or Twisting. More Convenient for Using, Reduces User Fatigue.Newest Ratcheting Design is more Labor-saving and Convenient, Only One Hand is Needed to Complete the Cutting Operation..
  • Easy to use: Before starting, each hand holds a handle and pulls it upward in a fan-shaped way to open the blade，put the pipe diameter below 63mm in cutter,push down handle repeatedly,forthwith cut off.After cutting,clean the blade with rustproof oil.Close the handle for ready use next time..
Check Stock

Mofun 12" Rise Ape Hangers 1.5" Fat Bars 1" Clamp Handlebars Fits for Harley Softail Dyna Sportster XL 883 1200 1998-2013 Road Glide 1994-2023 Road King Gloss Black

  • 【Fitments】:Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-up Road King Model & 1998-2013 Road Glide.**Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide** **Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers**Can not fit model with 1.25 Handlebar Clamp below.You can ask customer service for more detail information of motorcycle model..
  • 【Specifications】:Bar Diameter: 1.5 inch Fat Bar.Center Width: 11.75 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch.Grip Area Bar Diameter: 1 inch.End Rise: 12 inch.Overall Width: 35 inch.Pullback/Sweep: 8 inch..
  • 【High Quality】:Material: Seamless steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Finish: Powder Coated Black(Copper+Nickle+Black),High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

JOYIN 18 Pcs Snowman Decoration Kit Outdoor Holiday Party Decoration for Family Kids Winter Fun Build Your Own Snowman

  • SUPER VALUE with 18 Piece Cute Snowman Kit. Everything A Well Dressed Snowman Needs: Black-Red Top Hat, Button Eyes, Carrot Nose, Button Smile, Pipe....
  • BIG SIZE. For A Big Snowman, Top Hat is 11" Inner Diameter, Scarf is 52" Long, Button Eyes are 1.5" Diameter, The Other 12 Buttons are 1.25" Diameter.....
  • Perfect for Kids Building Their Own Snowman. Enjoy Hours of Outdoor Family Fun, Endless Happy Snowman Making..
  • Ideal As Developing Imagination and Creation Skills of Kids, Team Work Skills With Parents and Friends. Compete Building Snowman With Neighbors..
  • CUSTOMER SATISFACTION. Providing a 100% satisfaction experience is our main priority to our customers. Feel free to message us through “contact....
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

Libraton PVC Cutter 1-5/8\

  • ...braton PVC pipe cutter body is made of durable hardness aluminum alloy steel. The thick 2.5mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide one EXTRA replacement blade in Set. So y....
Check Stock

Copper Tube Cutter 3/16''-2'' Tubing Cutter for Copper, Pipe Cutter Tool, Brass, Aluminum, Thin Stainless Steel & PVC with Deburring Tool

  • 【High Quality】LEMNISCATE Tube Cutter is made of aluminum alloy surface, and the blade is made of SKD. So it makes the lifetime longer..
  • 【Wide Cutting Range】Ideal for cutting heavy hard materials such as thin stainless steel, and all hoses such as aluminum, copper, and PVC pipes. Cutting pipes outer diameter range from 3/16’’ to 2’’(5mm-50mm). Adjustable cutting depth designed for fast and clean cutting..
  • 【Comfortable Design】The Pipe Cutter is attached with bearings, fitted on the roller to make the rotation more smoother and clean. Silica gel is added to the handle to maintain grip, so it is not easy to slip due to sweat on the hands. Bottom rotating knob adjusts the tube cutter to the proper fit in a seamless smooth movement..
  • 【Package Includes】LEMNISCATE Pipe Cutter Set includes 1 pc pipe cutter and a deburring tool is made of sturdy plastic surface and high-speed steel blade. It is able to clean the burrs on the pipe after cutting quickly. Receive 1 Replacement Wheels free when you purchase 1 or more Tube Cutters offered..
  • 【Multiple Applications】It is suitable for various construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage repair shops. Because of its light and small desi....
Check Stock

Libraton PVC Pipe Cutter, Up to 2-1/2\

  • ...braton PVC pipe cutter body is made of durable hardness aluminum alloy steel. The thick 3mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The Libraton ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This professional pex cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change】This PVC pipe cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. PLEASE NOTE THAT THE REPLACEMENT BLADE IS NOT INCLUDED. If needed pl....
Check Stock