Reviews Bi metal Contact

High Carbon Steel Reciprocating Saw Blade Kit

  • 10x more cuts and 3x faster than conventional bi-metal blades.
  • Shatter and heat-resistant 8% cobalt bi-metal blades power through the toughest cuts.
  • Applications - metals and wood with nails.
  • 14pc Bi-Metal Blades w/ Storage Tube/Case--Made in USA.
Check Stock

Dremel MM492 Universal Quick-Fit Cutting Assortment Pack, 3-Piece , Black

  • WHAT'S INCLUDED: (1) MM480 1-1/4" Wood Flush Cut Blade (1) MM482 1-1/4" High Performance Bi- Metal Flush Cut Blade (1) MM450 3" Wood and Drywall Saw Blade.
  • 15X LIFE BI-METAL MATERIAL: MM482 Bi-metal blade in wood with nails provide up to 15X life vs. standard bi-metal oscillating blades in wood with nails.
  • FLUSH CUT BLADES: Designed to make precise cuts to allow for installation of flooring or wall trim.
  • PERFECT FOR: Wood (MM480) and Metal (MM482) applications with flush cutting capabilities. The MM450 ideal for cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes.
  • UNIVERSAL COMPATIBLE SYSTEM: Dremel Universal Quick-Fit interface allows for our blades to fit nearly every oscillating tool on the market including Dremel, Bosch, Makita, Milwaukee, and Rockwell.
  • USA BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock

3 3/8\ HSS TCT Circular Saw Blade Set, 85x10MM Wood Cutting Discs for Dremel Metal Cutter Rotary Tool Cutting Discs set-5pcs

  • 5-Piece set provides up to 50% in savings.
  • High performance carbide and bi-metal blades for greater durability, life and quality of cut.
  • Includes: (1) DOU125BW 1-1/4 in. Bi-Metal Blade for Nail-Embedded Wood, (1) DOU125JBW 1-1/4 in. Bi-Metal Blade for Clean Wood, (1) DOU125CGP 1-1/4 in. Carbide Blade for General Purpose Cuts, (1) DOU125CF 1-1/4 in. Carbide Blade for Metal, (1) DOU200RBD 2 in. Bi-Metal Blade for Drywall.
  • Universal interface design fits most tools, no adapters needed.
Check Stock

COMOWARE Bi-Metal Hole Saw Kit for Metal Wood PVC Board - 3/4\ to 2-1/2\ Set with 2 Mandrels & Spare Pilot Drill, 19 Pcs

  • Compatible Material: Plastic , Metal , Wood.
  • HIGH-QUALITY MATERIAL: Hole Saw Set is made of high quality Bi-Metal. The main body and the cutting edges of the bi-metal hole saw consist of two different tool steels (bi-metal). The main body consists of a special flexible steel and the teeth that cut the material are made of HSS..
  • SUPERIOR PERFORMANCE: The varied and fine toothing ensure that the hole saw does not get caught in the material and runs smoothly. Bi-metal hole saws have a larger number of cutting edges than carbide hole saws, which allow a clean cut..
  • WIDELY AND PROFESSIONEL USE: It is your ideal choice for DIY projects and household maintenance and repair. Suitable for metal, normal wood, thin PVC board, plastic..
  • SIZE INCLUDES:10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for needs in different situations, 1 x Spare Pilot Drill for replacement, 1 x Large Mandrel, 1 x Small Mandrel with Medium Adapter and 1 x Plastic Case for easy storage. The set includes the most popular hole saw sizes on the market to meet your different demands..
  • EASY ORGANIZATION: Set includes the hole saw kit holder with size index for easy storage and organizing. It is designed to keep all ....
Check Stock

TOLESA Heavy Metal Cutting Reciprocating Saw Blades 9 Inch 14TPI Sawzall Blades for Metal Pipe, Sheet Metal, Rebar, Cast-Iron Bi-Metal Sabre Saw Blades Better Wear Resistance for Metal Cutting 5 Pack

  • 【EXCELLENT CUTTING SKILLS】- Bi-metal reciprocating saw blades metal with sturdy cobalt edge provide effortless cutting into sheet metal, metal pipe and profile. Blades cut through medium to thick sheet metals 0.1- 0.3 inch (2-8 mm), solid pipes/profiles diameter < 7 inch..
  • 【SPECIAL CUTTING】 - with 0.9 thin wall and set teeth design, metal sawzall blades helps to reduce heat built up and maximize your cutting efficiency for heavy metal cuttings.
  • 【SPEED CUTTING】 - With intensive and high density 14TPI teeth, metal sabre saw blades have longer life and faster cutting speed than other standard bi-metal blades in demolition work.
  • 【HIGH DENSITY BLADES】 - Unlike other bi-metal material, constructed by high density bi-metal with extra 8% cobalt, metal cutting sawzall blades with better wear-resistance, having longer life span. And reciprocating saw blades for metal cutting more sturdy during cutting thick metal or heavy metal, keeping you safe from sudden broken blades.
  • 【UNIVERSAL SHANK】 - 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black & Decker, Ryobi, Porter Cable, Hitachi, Flex, Hilti and more.
Check Stock

Luomorgo 4.5 inch Hole Saw 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting....
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • Widely Used: Hole saws can cut 4-1 / 2 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In....
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a....
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want....
Check Stock

EZARC Titanium Oscillating Multitool Blades Power Cut Saw Blades Fast Cutting for Wood, Metal and Hard Material, 3-Pack

  • Titanium Coated Bi-metal Saw Blades: Increased blade hardness with 2x times longer life than standard bi-metal blades for the tougher material cutting.
  • All Purpose Multitool Blades: Fast cut-out in aluminum reinforced parquet, nails, copper pipe, laminate, construction wood, plastics & drywall.
  • Variety of Applications: Window installation, decking, flooring work, trimming and adjustment work.
  • Fits All Conventional Multi-Tools: With two extra adapters, fits more oscillating tools than competitors, compatible with most of brand oscillating tools on the market..
  • 100% Satisfaction Service: If you have any problem about our oscillating tool blades when you received or after using , please contact us by emailing , our customer servicer will reply you in 24 hours and will do our best to help you solve the problem.
Check Stock

4 Inch Hole Saw with Heavy Duty Arbor, 38mm Depth High Hole HSS Bi-Metal Cutter Saw 4 Inch Hole Saw Blade for Easily Drilling Soft Metal, Plywood, Plastic, Drywall, Wood, Fiberboard by AConnet (102mm)

  • 【High Performance Material】The 4 inch hole saw is made of M42 high speed steel and bi-metal, with higher hardness (≥64HRC), toughness and wear resistance, increased service life..
  • 【Hole Saw Dimensions】Cutting diameter: 4 inch (102mm).
  • Hole saw arbor shank: 7/16 inch (12mm), fits 1/2" drills..
  • 【Efficient Smooth Cutting】The hole saw blade is combine with sharp teeth, bi-metal band and non-binding clean edge.
  • Sharp duplex tooth for nice edge and sharp.
  • Therefor the hole saw blade cuts smoothly, cleanly and quickly..
  • 【Package Include】 Package include 1 pcs 102mm hole saw, 1 pcs 7/16" hole saw arbor, 3 pcs high-speed steel pilot drills and 1 pcs Allen wrench. Contact us if there any problem with the product. We attach great importance to customer's shopping satisfaction and are willing to solve any problems you have..
Check Stock

KEMPSTON 88105 Kempston Bi-Metal Plunge Cutting Saw Blade Precision Japan-Tooth, 1-1/2'

  • 88105 bi-metal plunge cutting Saw blade 1-1/2" precision japan-tooth. Kempston quick release arbor design.
  • Bi-metal teeth, offset, high cutting speed. Extremely durable and robust. Tough bi-metal Japanese-tooth plunge blade with 2-1/2" Length gets into hard-to-reach areas.
  • Working length or diameter: 1-1/2"" 34mm.
Check Stock

6 1/8 Inch HSS BI-Metal Hole Saw 1 3/16 inch Cutting Depth Hole Cutter with Hex Shank Drill Bit Adapter for Wood Cornhole Boards Plastic Drywall Fiberboard Can Light Recessed Light Blue

  • WIDE APPLICATION: Our Bi metal Hole saw is perfect for cutting wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal. In addition....
  • PROFESSIONAL MATERIAL: The 6 inch hole saw is made of HSS carbon steel & Bi-metal steel, which has superior performance and higher cutting strength....
  • SMOOTH CUTTING: he high-quality bi-metal blade and variable pitch sharp HSS teeth combine with Non-binding clean edge design ensures smooth and clean....
  • EXCELLENT WORKMANSHIP: This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness,....
  • CUSTOMER SERVICE: We are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our hole saw, we....
Check Stock