Reviews Bi directional Damper

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • ... INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

OBD2 Code

  • ✔【Best Key Programming Scan Tool Set That Won’t Break the Bank】This all-in-one package offers the highest level key programming capabilities....
  • ✔【This Professional Scan Tool does it ALL】 This 10” diagnostic tablet has packed OE level diagnostics, 31+ maintenance services,....
  • ✔【【Full Bi-Directional Control】XTOOL X100 MAX is a bi-directional scanner that is capable of full bi-directional controls over various car....
  • ✔【31+ Special Functions】X100 MAX automotive scan tool comes with advanced resets, relearns, adaptations, matchings, initializations,....
  • ✔【OE Full Systems Diagnostics】XTOOL X100 MAX can access and scan all available vehicle systems including Engine, Trans, ABS, Airbag, Body,....
Check Stock

All Balls 56-191 Fork and Dust Seal Kit

  • Converts dual damper rod and damper rod/cartridge forks to high-performance cartridge forks.
  • Contains a pair of high-performance, gas-charged mono-tube fork cartridges.
  • Improves resistance to front brake dive, front end stability, cornering and bottoming control.
  • Add direct internal component replacement.
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • ... INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different. Size: 4'' Inch.
Check Stock

Tailgate Damper Kit - Compatible with Ford F-150 2015, 2016, 2017, 2018, 2019, F-150 Raptor 2017-2019 - Replaces FL3Z-99406A10-A, FL3Z99406A10A - Tail gate Assist Shock Strut - Lift Support Kit

  • ...ove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory tailgate damper kit. Ensure that the tailgate harness under the tailgate just above the spare tire is removed before removing the tailgate and be careful in removing the tailgate because it is heavy and may require some assistance in doing so..
  • Lifetime Warranty - This tailgate damper kit comes complete with a lifetime warranty. In the event that it fails on your F-150 truck simply contact us for a replacement. Save time and money from the dealer by purchasing this part and installing it yourself on your truck..
Check Stock

Broan 8" Universal Automatic Make-Up Air Damper with Pressure Sensor Kit

  • 8″ Universal Automatic Make-Up Air Damper with Pressure Sensor Kit.
  • Interlocked make-up air damper systems meet IRC Code requirements for make-up air with range hoods over 400 CFM.
  • Interlocked make-up air systems avoid wasted energy associated with barometric solutions and do not let unwanted air into the home during heating or cooling activities so air pressure is equalized for a well-balanced environment.
  • Fresh air wall caps are required for use with Make-Up Air Dampers.
  • Interlocked make-up air dampers provide outside air when required to keep the air in the home fresher by allowing the range hood to operate at optimum levels.
  • Balance indoor air pressure by providing interlocked make-up air without requiring a direct wire connection between the range hood and the damper.
  • Instead a sensor is attached to the exhaust duct to detect if the range hood is operating.
  • Slave dampers (MD6S, MD8S or MD10S) are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation..
Check Stock

DNM Damping 3 System Mountain Bike Air Rear Shock Rebound/Lock Out/Air Pressure Adjustable AL 7005 Shark/AL 6061 Shock Body 165mm (6.5\) x 35mm

  • EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
  • Rebound Adjustment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 150 Psi, Negative air chamber 70 Psi.Weight 220 lbs - Main air chamber 165 Psi, Negative air chamber 75 Psi..
  • DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Ques....
Check Stock

DNM Damping 3 System Mountain Bike Air Rear Shock Rebound/Lock Out/Air Pressure Adjustable AL 7005 Shark/AL 6061 Shock Body 200mm (7.87") x 55mm

  • ... Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
  • Rebound Adjustment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 150 Psi, Negative air chamber 70 Psi.Weight 220 lbs - Main air chamber 165 Psi, Negative air chamber 75 Psi..
  • DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund ....
Check Stock

DVI Switch Splitter Bi-Directional DVI Splitter 2X1 or 1X2 BolAAzuL DVI Switcher 2 in 1 Out DVI Splitter 1 in 2 Out 4K 3840 x 2160 @30Hz DVI Selector Switch Box for PC Laptop Monitor LCD HDTV

  • 【DVI Switch 2X1】-With the DVI Bi-directional Switch splitter, you can connect 2 DVI sources to a single display with DVI in and choose any of them....
  • 【DVI Display Selector Splitter】- With this unique Bi-directional DVI switch splitter, you can not only choose the video source for your display....
  • 【4K Ready】-With a built-in video chip, this DVI 1X2 or 2X1 bi-direction switch can support resolutions up to [email protected], including....
  • 【Dual-way Control】-1) Button switch: Say goodbye to repeated plug and pull.
  • 2) Extension cord touch switch: Meet the needs of the long-distance....
  • 【kindly Note】⚠️-This DVI bi-directional Switch provides Display selector functions. When used as a DVI splitter, only 1 display can be working....
Check Stock

Samsung DE92-90242E Microwave Vent Damper Genuine Original Equipment Manufacturer OEM Part

  • This part is compatible with models including.
  • SMH8165B/XAA,SMH8165ST/XAA-01,SMH8165ST/XAA-00,SMH8165W/XAA-00,SMH8165STE/XAA-01,SMH8165STE/XAA-00.
  • Vent damper DE92-90242E attaches to the outer cabinet and directs airflow through the vent duct.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Samsung.
  • This vent damper (part number DE92-90242E) is for microwaves.
  • Unplug the microwave before installing this part.
Check Stock