Reviews Benz 38 Pin Connector

Creator OBD2 Scanner for Mercedes Benz ABS SRS Transmission Full System Diagnostic Scan Tool Professional Automotive Code Reader - Creator C502 [2022 Version]

  • ...d other models produced between 2001 and 2018. Support code retrieval, clearing and real-time live data of all systems, including Drive, Chassis, Body, AirBag, Seats and doors, E-call, Driver assistance system, ABS and so on..
  • 【Purchase Notes】NOTE: Some models manufactured before 2000 may use a 38-pin diagnostic connector. For these cars, the 502 does not work with them. If you are uneasy about the scope of application, please tell us your vehicle model and production year (if you have VIN, it is better).
  • 【Oil Light Reset】When you replace or service your oil, or replace the oil pump or oil sensor, you may need to reset oil light. Creator 502 can reset the oil lamp on the dashboard after your service is completed. Note: Only applicable to Benz cars.
  • 【Universal OBD2 Scanner】Also supports full OBD-II service for other car make, such as read/erase code, live data, freeze frame, Mode 6, I/M Readiness, VIN info and so on. It can diagnose Emission-Related Diagnostic Trouble Codes and check engine light. It works on most vehicles with OBD-II diagnostic interface and is applicable to all OBD-II protocols (KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN)..
  • 【Not Just Entry-level】No pre-upgrade is required and diagnosis is done right out of the box. ....
Check Stock

Molex Micro-Fit 3.0 Dual Row (8 Circuits) Male & Female Receptacle Plug, w/Terminal sockets, (Pack of 1 Complete Set)

  • Package Content : 1 x 8 Pin Waterproof Connector Set.
Check Stock

iCarsoft Auto iCarsoft M900 V2.0 Mercedes-Benz Diagnostic Scan Tool Sprinter Scanner Smart Code Reader Airbag Scan,Oil Reset etc

  • iCarsoft M900 V2.0 scanners mainly works on OBD II Mercedes. M900 V2.0 can work for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin adapter for conversion. iCarsoft Benz 38 pin socket in black is for engine only, and the red one is for multi-system.
  • iCarsoft M900 V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

HAIN Compatible OBD Diagnostic Adapter with 20 pin to 16 PIN OBD2 Connector for BMW E36 E39 X5 Z3

  • 1.20 pins OBD port for a BMW car. The other port for the 16 pins OBD2 diagnostic tool..
  • 2.Used specifically for connecting your OBD2 scanner and your BMW..
  • 4.Connectors: 20 pin connector, 16 pin OBD II female connector..
  • 5.Package include:1x VIMVIP OBD BMW 20 Pin Cable..
Check Stock

uxcell 14 Pin to 16 Pin OBDII OBD2 Diagnostic Adapter Connector Cable Tool for Reading Diagnostics Info from Scanner for Mercedes-Benz

  • [Fitment] For Mercedes-Benz 14 Pin male to 16 Pin OBD2 female connector..
  • [Function] The function of the cable is connected to OBD diagnostic scanner, it can read real time engine data, such as speed, RPM, temperature, O2 sensor data, emissions, voltage, etc. That is convenient for your car driving..
  • [Feature] This is a brand new data link cable, used specifically for connecting your OBD2 scanner. Attention: this item is just an adapter, not a scanner..
  • [Easy installation] Durable and waterproof, convenient to use, plug and play..
  • [Durable Material] The cable adapter is made of plastic and metal, corrosion resistant, heat resistant and long service life..
Check Stock

RackSolutions Wall Mount for Dell OptiPlex 3040 and Inspiron 3252 SFF PCs with VESA Mouting

  • Mini 6 Pin to SATA: Mini 6 Pin port plugs into the motherboard (NOTE: It is mini 6 pin port, not standard 6 pin port.), SATA port plugs into the hard drive.
  • Connectors: Connector A: ATX 12V mini 6 pin, Connector B: SATA Port (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • Compatibility:Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • ( Note: Do Not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
  • Quality: 18AWG with braided sleeves, Length(including connectors): 15 inches(38cm).
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • Chipset: Intel Q57 Express chipset, Supported Processors: Quad-Core - Intel Core i7 series, Intel Core i5 series, Dual-Core - Intel Core i3 series, Intel Pentium, Socket Type - LGA1156.
  • Supported Memory: Type - DDR3 SDRAM (non-ECC memory only), Speed 1066 MHz or 1333 MHz, Connectors - four, Capacity - 1 GB, 2 GB, or 4 GB, Minimum memory - 1 GB, Maximum memory - 16 GB, Audio: integrated.
  • Video: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
  • 16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Proces....
Check Stock

Genuine Dell MotherBoard For Dell OptiPlex 740 Desktop Systems nVidia Chipset: GeForce 6150LE/Nforce 430 Compatible Part Numbers: HX340, YP696, RY469

  • CHIPSET: nVidia GeForce 6150LE/Nforce 430.
  • SUPPORTED PROCESSORS: AMD Athlon 64 X2 Dual-Core, AMD Athlon 64. SUPPORTED MEMORY: Dual-Channel DDR2 SDRAM (4 DIMMs Slots, 533, 667Mhz or 800Mhz), Up to 8 GB RAM.
  • PERIPHERAL INTERFACES: 1 - VGA Port, 1 - Serial Port, 1 - Parallel Port, 7 - 2.0 USB Ports (front and back), 1- Integrated 10 / 100/1000 Network Port, 2 Connectors for line-in and line-out.
  • 2 front-panel connectors for headphones and microphone, 3 - SATA Connectors (7-pin), 1 - Floppy Drive Connector (38-pin), 1 - Fan Connector (5-pin).
  • EXPANSION CAPABILITY: 1 - PCI-E X16 Graphics slot, 1 - PCI-E X1, 1 - PCI 32Bit / 33MHz slots.
Check Stock

FFB1212EHE-F00 120 x 120 x 38mm Cooling Fan, 190 CFM, 4000 RPM, 59 dBA, 17.78 air pressure, 3 pin Tach connector, Combo Set of 3 Pieces, Ship from USA !!

  • Air Flow: 190 (Mini. 170.92) CFM or 5.38 (Mini. 4.84) Cubic Meter per minute.
  • Air Pressure: 17.78 (Mini. 14.30) mmH2O or 0.70 (Mini. 0.563) inchH2O.
  • Rated Input Voltage: 12VDC, Operating Input Voltage: 7 – 13.2VDC, Input Current: 2A (Max. 3A).
  • 3-pin connector with speed (Tach) sensor – Caution: the 3-pin header must provide a minimum of 3A of power in order to power this fan so please check if your motherboard’s 3-pin header can provide enough power and if the header might overheat. We suggest using a fan controller with enough power, or purchase the same fan in the 4-pin molex + 3-pin connector version so you can power the fan directly from a power supply but without the ability to control the fan speed..
Check Stock

Dell - Dell Dimension E521 305W Power Supp

  • 375 W Max Output | 100-120V or 200-240V Input.
  • Compatible Systems: For Dimension 9100, 9150, For Precision Workstations 380, 390, For XPS 400, Upgrade for Dimension 5100, E510, 5150, E520, E521, E310, 3100.
  • Compatible Part Numbers: P8401, K8956, WM283, UP173 | Model Numbers: L375P-00, N375P-00, PNL375P, PS-6371-1DF-LF.
  • Connectors: P1 - 24-pin ATX Motherboard Power, P2 - 4-pin ATX Power connector, P3 - 4-pin SATA standard power connector, P4 - 6-pin Dell proprietary connector, P5 - 4-pin SATA standard power connector, P7 - 4-pin Floppy connector, P8 - 4-pin Molex power connector, P9 - 4-pin Molex power connector, P10 - 4-pin Molex power connector, P11 - 4-pin Molex power connector, P12 - 6-pin PCI-E power connector.
Check Stock