Reviews Benz 38 Pin Breakout
S-Union Ethereum ETH ZEC Mining Power Supply 12V GPU/PSU Breakout Board + 12pcs 16AWG PCI-E 6Pin to 6+2Pin Cables 27.5Inch Length 70CM with 5 Nylon Cable Ties
- 【Item】GPU Mining Power Supply Breakout Board and PCI-E 6Pin to 6+2Pin (Male to Male) cable.
- 【Performance】Measured maximum can support to 1600W power supply, 12 groups of graphics card 6pin output.
- 【Safety】The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. The line is 16 AWG wire,Able to....
- 【Compatibility】This item is Compatible with GPU Mining Power Supply -HP 1200W/750W PSU. Such as DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12....
- 【What You Get And Shipping】1x Power Supply Unit Breakout Board & 12x PCI-E 6Pin to 6+2Pin Cables & 5x Nylon Cable Ties. SHIPPED FROM THE U.S.....
Check StockiCarsoft Auto iCarsoft M900 V2.0 Mercedes-Benz Diagnostic Scan Tool Sprinter Scanner Smart Code Reader Airbag Scan,Oil Reset etc
- iCarsoft M900 V2.0 scanners mainly works on OBD II Mercedes. M900 V2.0 can work for chassis 202, 210, 140, 208, 170, 129.
- and you need to purchase iCarsoft 38 pin adapter for conversion. iCarsoft Benz 38 pin socket in black is for engine only, and the red one is for multi-system.
- iCarsoft M900 V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
- Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
- NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check StockCreator OBD2 Scanner for Mercedes Benz ABS SRS Transmission Full System Diagnostic Scan Tool Professional Automotive Code Reader - Creator C502 [2022 Version]
- 【Full system diagnosis for Mercedes-Benz】Works on most Mercedes-Benz A, B, C, E, S, CLS Class and other models produced between 2001 and 2018. Support code retrieval, clearing and real-time live data of all systems, including Drive, Chassis, Body, AirBag, Seats and doors, E-call, Driver assistance system, ABS and so on..
- 【Purchase Notes】NOTE: Some models manufactured before 2000 may use a 38-pin diagnostic connector. For these cars, the 502 does not work with them. If you are uneasy about the scope of application, please tell us your vehicle model and production year (if you have VIN, it is better).
- 【Oil Light Reset】When you replace or service your oil, or replace the oil pump or oil sensor, you may need to reset oil light. Creator 502 can reset the oil lamp on the dashboard after your service is completed. Note: Only applicable to Benz cars.
- 【Universal OBD2 Scanner】Also supports full OBD-II service for other car make, such as read/erase code, live data, freeze frame, Mode 6, I/M Readiness, VIN info and so on. It can diagnose Emission-Related Diagnostic Trouble Codes and check engine light. It works on most vehicles with OBD-II diagnostic interface and is applicable to all OBD-II protocols (KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN....
Check StockUMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino
- It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
- 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
- 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
- RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
- The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stockuxcell 38 Pin to 16 Pin OBDII OBD2 Diagnostic Adapter Connector Cable Tool for Reading Diagnostics Info from Scanner for Mercedes-Benz
- [Fitment] For Mercedes-Benz 38 Pin male to 16 Pin OBD2 female connector..
- [Function] The function of the cable is connected to OBD diagnostic scanner, it can read real time engine data, such as speed, RPM, temperature, O2 sensor data, emissions, voltage, etc. That is convenient for your car driving..
- [Feature] This is a brand new data link cable, used specifically for connecting your OBD2 scanner. Attention: this item is just an adapter, not a scanner..
- [Easy installation] Durable and waterproof, convenient to use, plug and play..
- [Durable Material] The cable adapter is made of plastic and metal, corrosion resistant, heat resistant and long service life..
Check StockOBD-II Breakout Diagnostic Box, OBD2 Pinout Tester Detector
- The OBD-II breakout box with male and female header connectors, so that this breakout box can be placed between the vehicle and the diagnosis tool. Very handy if you want to measure CAN bus signals..
- To provide quick access to all 16 pin connections during repair and diagnosis of the vehicle..
- OBD-II breakout header cable length 420mm/16", to facilitate plugging in equipment..
- Standard 4mm banana sockets. The five color sockets correspond to different pinouts, which is convenient for you to identify pinouts with different functions..
Check StockGeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header
- Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
- Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
- Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
- For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
- Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check StockS-Union [8PCS] New 16AWG 6Pin PCI-E to 8 6+2 pin Cable 27.5 Inch 70CM Length PCI 6Pin Male to Male Cable for GPU/PSU Breakout Board GPU Ethereum ETH Mining Power Supply with 5 Nylon Cable Ties
- 【Item】PCI-E 6Pin to 8 (6+2) pin Male to Male Cable.
- 【Safety】This item is 16 AWG wire,Able to withstand greater current and high power appliances.
- 【Feature】The line is 27.5 inch (70CM) long, easy to use and connect.
- 【Compatibility】This item is Compatible with Graphics Video Card, GPU breakout board,GPU Mining Power Supply, for GPU breakout board Search:....
- 【What You Get And Shipping】8 x PCIe 6Pin to 6+2 Pin Male to Male Cable & 5x Nylon Cable Ties. SHIPPED FROM THE U.S. Delivery time takes about 2-5....
Check StockDORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
- The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
- The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
- ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
- This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
Check StockProgramming The Raspberry Pi Pico In C
- Compatible with Raspberry Pi Model 4/3B/Zero 1.3/2B/B+/A+ GPIO.
- Use your RPi 4/3/Zero/2/B+/A+ with prototypes consisting of a 40-pin breakout.
- 8"(20cm) cable length, dark grey color, NELTRON cable.
Check Stock