Reviews Beam Drill

Dolibest Set of 4 Permanent Antirust Stainless Steel 304 Heavy Duty Swing Hangers, Playground Porch Yoga Seat,for Wood and Steel Beam Yoga Hammock Chair Punching 1500LB Capacity,180° Swing,7.67''

  • ...ity: All parts are made of high quality 304 stainless steel materials. No rust, strong enough corrosion resistance and high hardness to ensure safe and environmentally friendly use, non-toxic and no odor. 1500 lb capacity. The length of the swing bolts is 5.12'', the total length is 7.67''..
  • Simple Installation: pre-drill a hole in the steel or wooden beam (use a 0.32 inch drill bit size), when installing it on the wood, put two tight nuts on the top, and then tighten. When installing on the steel beam, put a nut on the top of the beam, and tighten the other side on the beam. All installation hardware is included for easy and quick installation..
  • Unique Design: Wooden or steel beam support can swing 180° back and forth, more flexible, wide range of use, not easy to break, and safety performance is guaranteed..
  • Use Scenes: Home yard, wooden swing, porch swing, swing chair, yoga swing, hammock chair, suspension trainer, Olympic ring, gymnastic equipment, fitness ring, fitness chair, gym swing, sandbag swing, sandbag, etc..
  • Customer Service:Recommended for Ages 12+. No matter what problems you encounter, please feel free to contact us, we will reply to you within 24 hours. We are committed to bringing healthy lifestyles to our customers, not just selling p....
Check Stock

DEWALT 20V MAX Rotary Hammer, SDS Plus, 1-1/8-Inch, Tool Only (DCH263B)

  • Cordless hammer drill has 3.0 Joules of impact energy for fast drilling in concrete..
  • SHOCKS ACTIVE VIBRATION CONTROL System of DEWALT 20V hammer drill reduces vibration felt by the user at the handles, compared to rotary hammers without this feature..
  • Lightweight design makes this DEWALT 20V brushless hammer drill ideal for forming, #3 to #5 post installed rebar dowelling, tilt wall support, rod hanging, beam & column anchorage, and steel stanchion mounting..
  • OSHA Table 1 Compliant when paired with DWH205DH On Board Extractor..
  • Brushless motor and durable German-engineered mechanism for efficient performance and runtime..
  • Rotating Dial to set tool to a specific applicaiton mode - Drill, Hammer Drill, or Chip..
Check Stock

Lovely Snail A-Frame Bracket Swing Set Heavy Duty Steel Brackets with Mounting Hardware 1 Pack Green

  • HEAVY DUTY STEEL BRACKETS: Made of heavy gauge steel and powder coated for protection against rust and decay, these A-frame brackets are the strongest brackets to build a swing set..
  • TREATED LUMBER NEEDED: 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Measure the lumber before purchasing to ensure it meets our specifications..
  • EASY TO MOUNT: Insert the 4x6 top wood beam into bracket and use 1/4" pilot drill bit to drill holes. Then slide side the 4x4 legs into bracket, install lag bolts and washers, finally tighten with socket wrench..
  • WHAT YOU GET: 1 swing set bracket ,14pcs screws and 14pcs washers. This frame brackets included all hardware required to install them. ONE PACK!.
  • BUY WITH CONFIDENCE: Keeping you satisfied and providing you with the friendliest customer service is our number one goal. Contact us anytime if you have any questions..
Check Stock

Foifatt 313318001 String Trimmer Head Replacement for Homelite Ryobi RY15523A arborless Reel Easy Bump Trimmer Head Assembly P2009 RY15523AVNM

  • Drill/driver: compact design fits into small spaces, ideal for hard to reach areas Drill/driver: powerful motor with 15% better performance than a full-sized drill Drill/driver: LED light illuminates work surface for increased visibility.
  • Drill/driver: Magtray magnetic holder for convenient placement of screws and bits Impact driver: auto-load chuck for fast, easy 1-handed bit loading and ejecting.
  • Impact driver: tri-beam LED provides optimum illumination and eliminates shadows on work surface Impact driver: powerful motor provides enough torque for the most demanding applications.
  • JobPlus base with multi-tool head: compact tool head fits into tight spaces JobPlus base with multi-tool head: multiple position tool head adds handling versatility JobPlus base with multi-tool head: variable speed trigger allows precise speed adjustment.
  • JobPlus base with multi-tool head: compatible with RIDGID JobMax interchangeable tool head system Kit includes two 18-Volt ONE+ compact LITHIUM+ batteries which improves the performance of ONE+ tool up to 15% and features an on-board fuel gauge Dual chemistry charger: charges all Ryobi 18-Volt ONE+ batteries in as little as 30 minutes.
Check Stock

DEWALT 20V MAX XR Rotary Hammer, SDS Plus, L-Shape, On-Board Dust Extractor, 1-Inch (DCH273P2DHO)

  • The cordless hammer drill has the brushless motor for efficient performance and runtime.
  • DEWALT 20V hammer drill has 2.1 Joules impact energy for fast drilling in concrete.
  • Lightweight design makes this DEWALT 20V brushless hammer drill ideal for structural connections, beam & column anchorage, rod hanging, seismic & safety attachments, cable tray & strut mounting, and steel stanchion mounting..
  • SHOCKS ACTIVE VIBRATION CONTROL System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
  • Powerful dust extraction system with built-in motor for increased suction and high tool performance.
Check Stock

BETOOLL A-Frame 2 Brackets Swing Set Bracket with Mounting Hardware (Green)

  • The Strongest Brackets to Build A Swing Set---Made of heavy gauge steel, 100% welded joints,heavy and durable.Also painted nicely to stay rust free for a good looking swing set for years to come..
  • What You Get--- 2 swing set brackets ,28pcs wood screws and 28pcs washers.BETOOLL frame brackets set includes screws and washers required to install them!Also come with our 18-month customer service..
  • Making A Seriously Sturdy A-frame in the Easiest Way---We recommend using one kiln-dried 4x6-114" top beam (with a true measurement of 3-1/2" x 5-1/2") and four kiln-dried 4x4-96" (with true measurements of 3-1/2" x 3-1/2") side support legs to construct a basic A-Frame which completed dimensions:12'Lx8'Dx7'8"H.(Lumber is not included in this kit.).
  • Easy Install---First attach the swing set brackets to 4x6 top beam.Then simply slide the 4x4 legs into the brackets with the beam lying on the ground (top down).Pre-drill the holes for the lag screws and ratchet them down.Also you could add a 2x4 cross piece on the legs for added stability.
  • NOTE!!!!! The bracket openings measure 3-5/8" x 5-5/8" and 3-5/8" x 3-5/8". Make sure the length of 4x6 top beam is shorter than 114.
Check Stock

Woodpeckers Precision Woodworking Square 6\ x 4\

  • INCLUDES - You will receive two squares, the 3 1/2 inch and 6 inch Stainless Steel Delve Square from Woodpeckers. The squares includes their own Rack-It mounting kit for wall hanging..
  • BUILT IN SIMPLIFICATION - The 1/4 inch offset simplifies dividing standard 3/4 inch stock by thirds. The 3/8 inch offset locates the center of a 3/4" board instantly..
  • MILLED BEAM - The beam is milled giving you set-up bloacks of 1/4, 3/8, 1/2 and 3/4 inch..
  • PRECISION WOODWORKING - The scribing holds guide your pencil for perfect parallel lines and you can use thje set-up block sections for drill press or router bit depth of cut..
  • MADE IN USA - Like all Woodpeckers products, the Stainless Steel Delve Square is proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

General Tools 11 Washer and Gasket Cutter, Black

  • MAKE GASKETS- Makes instantaneous and precise gaskets from a variety of materials.
  • EASILY CUTS- The cutter can take on leather, rubber, cork, graphite, copper and other soft materials.
  • FITS BIT BRACE OR HAND DRILL- The shank has been designed with a round shaft and a square end to fit both a bit brace and a hand drill.
  • STEEL CONSTRUCTION- Made of steel, including graduated beam for adjusting diameters from 5/8 in. to 6-1/2 in.
  • ADJUSTABLE- Two independently adjustable cutter blades cut inside and outside diameters simultaneously.
  • REPLACEABLE- Included blades (#11B) are replaceable.
  • GENERAL TOOLS- We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

LED Headlights For Jeep Compass SUV 2011-2016 For Jeep Grand Cherokee 2011-2013, LED Headlights Assembly Halogen Lights Replacement with Full LED DRL Turn Signal Lights High Low Beam Lamps

  • 【Fitment Guide】: Led headlights assembly for Jeep Compass 2011 2012 2013 2014 2015 2016 & 2011 2012 2013 Jeep Grand Cherokee (only for the1st Gen ) To buy the right lights for your car, pls confirm your model&year before purchase..
  • Plug-N-Play：Replace your original lights directly, no need to drill or modify,just screws some insert nuts into the car body.Professional installation is recommended. OEM#:CH2503246,68171214AA,68171214AB,CH2502246,68171215AA,68171215AB..
  • Gorgeous Design: 1.LED Daytime Running Lights: LED while first start up, energy-saving and environmentally friendly, increasing the safety of daytime driving.
  • 2.Turn signal light, being alarmed in advance by a clear and eye-catching dynamic light bar, improving the safety distance.
  • 3.High&Low Beam: flat tangent line of the low beam, concentrated high beam, enlarging the horizontal irradiation area, freely switched between high or low beam..
  • 【PACKAGE INCLUDED&WARRANTY】 2PCS upgraded led headlights (driver and passenger side),including turn signal light, daytime running light, high Beam Lens, low beam Lens. CDG has one year maintenance since purchase date..
Check Stock

Genssi LED Low & High Beam Headlight Bulb Pro Kit Compatible with Freightliner Columbia 120 1996-2017

  • Compatible with Freightliner Columbia with the headlamp pictured, see images of which one below, low beam and high beam sets.
  • Will not fit models with Projector Lamps.
  • Up to 3X as bright as the factory halogen bulbs with a more white light.
  • XD Extreme GX7 Pro LED Chips for increased life out performing the competition.
  • simply remove the headlight cap, twist out the old bulbs, make a few connections.
  • LED drivers can be mounted inside the capsule if they fit or drill a hole through the cap and mount outside.
Check Stock