Reviews Battery For Traxxas Slash 2wd

Traxxas 2797 Suspension Arm Mounts 0-Degree pair

  • Rc shock tower easily upgrades and replaces stock parts #3639 Front Shock Tower,#3638 Rear Shock Tower for Traxxas..
  • Compatible with Traxxas 1/10 Slash 2WD, Slash VXL, Stampede VXL, Bandit VXL, Bandit, Ford F-150 Raptor, Rustler VXL, Rustler etc 2WD car..
  • 2WD shock tower with multiple holes, you can adjust the angle, height, and height of the shock absorber to suit different ways of play..
  • 1/10 slash shock tower CNC precision machining, Made of aluminum alloy material, it has strong impact resistance and protects your car body from....
  • Rustler shock tower include: 1x Front, 1x Rear, 1× Screw pack.
Check Stock

Traxxas 3752 Stub Axle Carriers (pair)

  • Requires 5x11x4mm bearings or bushings (not included).
  • Fits Electric Traxxas Rustler, 2WD Stampede and Stampede-Based vehicles, and 2WD Slash and Slash-based vehicles.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

Traxxas 1/10 Slash, 2WD, RTR (Includes Battery & Charger): PinkX

  • Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
  • Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
  • Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
  • Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
  • Part number(s) included (in factory packaging): 58034-1.
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 2WD Slash, Stampede, Rustler, Nitro Slash-Replaces Part 3736 3632 3752

  • Easy upgrade replace Traxxas stock part #3632 Caster blocks，#3736 Steering blocks,#3752 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD,Bigfoot 2WD.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(8),PTFE washers(8),Suspension Screw Pins(6),Screws(2),Washers(4).
Check Stock

GLOBACT RC Tires for 1/10 Short Course Truck Tires for Traxxas Slash 4×4 2WD HSP Tamiya HPI Kyosho Redcat AXIAL RC4WD Model Car（4Pcs/Set） Replace 5883/5883A

  • Compatible with 1/10 traxxas slash tires are Made of high quality rubber and durable in use,High Wear-resistant High Crush-resistant.
  • Suit for 1:10 Short Course Truck includes Traxxas Slash 4×4 /Traxxas Slash 2WD/Tamiya /HPI/Kyosho/Redcat/AXIAL/RC4WD RC Model Car.
  • The tire and wheel can be dissembled separately.
  • Note: Since the product is detachable, it is easy to loosen during useBefore using the tire, the tire should be fixed with glue to avoid separation of the tire from the wheel hub during use..
  • This is an accessory product for Traxxas Slash 4×4 2WD 1/10 Short Course Truck . If any question, please tell us without hesitation.
Check Stock

Extended Battery Hold Down and Hold Down Retainer

  • Extended battery hold down and hold down retainer.
  • Includes battery post, foam spacer, and angled body clip.
  • Allows for installation of taller, multi-cell batteries.
  • Fits 1/10 Scale 2WD Slash models, both standard and LCG-chassis and standard-chassis 4WD Slashes (does not fit LCG 4x4 chassis).
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Globact Aluminum Adjustable Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts 7Pcs Blue

  • Aluminum Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts,Replacement of Traxxas #1935 3644 3745 3741X....
  • 1/10 camber link adjustable Length,Long Suspension Link 6 x linkages,length from 68 to 88mm,(center to center),Short Suspension Link,1 x....
  • Compatible with traxxas slash 4x4 links package Include:7 x Adjustable Metal Links,14 x Screws and 8 x Nylon Lock-Nuts..
  • Slash 2WD Link must Note: 1. The Link Rods is installed on the chassis of the remote control car and fixed with screws to solve the loosening problem.....
Check Stock

GLOBACT 4PCS All Aluminum Front & Rear Shocks Upgrade Parts for 1/10 Traxxas Slash 2WD Slash 4x4 4WD Rustler Stampede Hoss RC Truck, Replace 5862 (Blue)

  • 【Compatible with】Suit for 1/10 Traxxas Slash Shocks 2WD / Traxxas Slash shocks 4x4 / Rustler shocks 4×4&2WD / Stampede shocks 4×4&2WD / Hoss shocks 4×4&2WD, Replacement of Stock Part# 5862..
  • 【Excellent quality】CNC machined for precision, Assembled with widened TiN shafts and springs provide optimal bump and jump control for your Traxxas model. A built-in sealing ring can effectively prevent oil leakage..
  • 【High-quality materials】Made of lightweight Aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • 【Shock Size】RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:100mm/3.9") & 2x Alloy Rear Shock Absorber (Total length:115mm/ 4.5”)..
  • 【What You Get】2 x Front Shock, 2 x Rear Shock, 8 × Screws, 4 × washer. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock

AIYIHOBBY Aluminum Alloy Front Caster Block & Steering Blocks kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736(Blue)

  • Compatible with 1/10 Scale Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor, Nitro Slash, Bigfoot 2WD RC Cars Trucks ONLY..
  • 2WD Front Caster Steering Blocks kit can be easily upgrade replace Traxxas stock part #3632 Caster blocks, #3736 Steering blocks..
  • 1/10 Front caster steering blocks kit is made of aluminum alloy material for increased crash resistance and long-lasting durability during the most extreme RC action..
  • Metal front caster steering blocks is CNC precision machining for smooth suspension arms operation in all conditions..
  • Package Include(Necessary parts required for installation): 2*Steering Block, 2*Caster Blocks (left/right), 6*Screw Pins, 2*Screw, 4*5x11x4mm bearings, 4*Gasket..
Check Stock