Reviews Barreled Water Filling Machine

Multifunctional A03 Manual Paste Liquid Filling Machine, Wine Bottle Filler 5-50ml, Stainless Steel lip gloss base Filling Machine for liquid cosmetic,Cream, Shampoo, Cosmetic, Honey

  • ①【Filling Capacity】5-50ml (liquid，paste or other liquid substance). Our A03 filling machine named lip gloss dispenser machine, cream filling machine, lotion filling machine, oil dispenser machine, wine bottle filler. Our A03 filling machine does not require electricity and gas, which is suitable for laboratory and small batch production..
  • ②【Corrosion resistant】The machine is suitable for acidic liquids, good wear resistance and high temperature resistance, and can be filled with paste liquids up to 200°C..
  • ③【Update filling machine】High-quality steel cylinder, water separator, stainless steel filling nozzle and anti-drip design can ensure accurate filling and product purity..
  • ④【Easy to clean】This machine is made of high-quality stainless steel, which runs stably and has a long service life. And the hopper is easier to disassemble and clean..
  • ⑤【Application】The manual filling machine is mainly used for the filling of liquid paste in the pharmaceutical, daily chemical, food processing and other industries. It can also be used for quantitative filling of sealed hoses. It is an ideal paste liquid filling equipment..
Check Stock

Hanchen Liquid Filling Machine Automatic Bottle Filler 1-135 Fl Oz Digital Liquid Filler Cosmetic Oil Filling Machine for MCT Oil, Milk, Water, Juice, Essential Oil with 2 Heads Diaphragm Pump

  • [TWO INDEPENDENT CHANNELS] Two filling channels on this double head liquid filling machine are independent and complete. Therefore, liquid in two tubings won’t influence each other, it can be used for filling two kinds of liquid at the same time, DOUBLE your work efficiency, and filling two different volumes at the same time..
  • [HIGH EFFICIENCY 135 Fl Oz/Min PUMP] With a high filling speed of 135 oz./min, the diaphragm pumps installed on this bottle filling machine can fill a 10 oz. bottle within 5s! And the accuracy is up to 1%. It can greatly improve the work efficiency of customers who have the need of small batch production..
  • [WIDE APPLICATION] This liquid filling machine is an ideal filling equipment for small batch production in cosmetics, beverage, daily chemical, and other industries. It is suitable for thin (water-like or oil-like), particle-free, non-corrosive liquid, such as cosmetic oil, beer, beverage, essential oil, MCT oil, 45% alcohol, water, glass detergent, etc..
  • [SUS304 ANTI-DRIP DISCHARGE NOZZLE] Unlike plastic discharge nozzle used by other vendors, we adopts SUS304 material to make a long hollow discharge nozzle. 4mm and 6mm nozzles are included in the package, for bottles/pouches with different openings. Equipped with an check va....
Check Stock

2 in 1 Ice Maker Countertop, 48LBS/24H Automatic Ice Stainless Steel Machine with Water Dispenser, ready in 8 Minutes, with Ice Scoop and 2.6 lb Ice Storage

  • ...2 In 1 Ice Maker Machine is Extendable water spout design, uses "water cooler" style to supply ice or cold drinking water conveniently. You also can mix the ice with the drinks, dishes, fruits, wine or be used for ice when you sprained..
  • 【Simple Control Panel】Countertop Ice Machine is so easy to use, Automatic barreled water intake or manual water tank directly add water to meet different needs. The buttons on the control panel let you select the three sizes of ice. There's indicator lights to tell you when the ice is ready or you need to add water.
  • 【High-grade Accessories】Water Dispenser w/Built-In Ice Maker Machine has high quality compressors, low noise will not disturb you. The inner core uses commercial refrigerant R134a, which is environmentally friendly and pollution-free..
  • 【3-MONTH WARRANTY】Proicer offers 3-month warranty and 30-day return policy for this safe and strong ice maker so you can buy it with confidence. Built-in Safety Function can power off automatically when it is waterless and ice sensor will stop it when ice full,so you don’t worry it will damage when you use it..
Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case, White

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Homemade Perfume: Create Exquisite, Naturally Scented Products to Fill Your Life with Botanical Aromas

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

INTBUYING Liquid Fill Machine Bottle Pack Seal 500ml Water Drink Coffee

  • 【Stainless Steel Filler】This is a liquid filling machine with one nozzle. It comes with a self-sucking pipe. Made of stainless steel and parts contacting with filling material are made of 304 stainless steel..
  • 【Adjustable Filling Parameters 】Filling capacity, filling speed can be adjusted according to your needs. The powerful and stable air cyliner makes filling fast and precise..
  • 【Two Operation Method】 With a foot switch. Automatic or manual mode can be selected according to your choice..
  • 【Clamp-type Connection】The self-sucking pipe,drip-proof nozzle and three-way valve is connected by clamps which is easy to be disassemnled and cleaned..
  • 【Application】Filling machine can be used for fill liquids flows like water such as milk, coffee, water, various drink beverages..
Check Stock

LFJD 6 Heads Liquid Filling Machine 3-5000ml Fille Bottle Filler Digital Control Filler Pump Stainless Steel 110V (6 Heads)

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Moonshan Liquid Filling Machine 1-118 Oz Bottle Filler Machine Bottling Diaphragm Pump Digital Control for Liquid, Juice, Wine, MCT Oil, Cosmetic Oil, Detergent with Non-drip Single Head GFK-160A

  • 【118 Fl Oz/min Diaphragm Pump】Choosing a liquid filling machine is actually choosing pumps. This liquid filling machine adopts a large flow rate internal return diaphram pump, which is powerful and super cost-effective. And its maximum flow rate can reach 118oz/min (=3500ml/min), error ≤±1%, more suitable for filling amount > 1 Fl Oz(=30ml). * Diaphragm pump filling low volume liquid will have large error. Don't be fooled by exaggerated statement from some vendors..
  • 【Upgraded Components and Warranty】Even though liquid filling machines look and function similarly, the pumps and components inside are completely different. Casing of our bottle filling machine is made of more durable stainless steel. Our liquid filling machines are upgraded thoroughly, not only the material and components, but better assembly process thanks to years of experience. What's more, we provide each customer with ONE-YEAR warranty and lifetime technical support..
  • 【7 Groups of Data Saving and Automatic Working】Cored with an intelligent control board, seven groups of setting can be stored, recall your desired filling settings without worrying changing different volumes. Continuous mode(Automatic mode) and inching mode(manual mode) switchable. And this filler machine ....
Check Stock

Bandai spirits 1/100 MG RX121-2 Gundam TR-1 Hazel Ousla

  • Full weapon load-out features Double-barreled beam rifle, rocket launcher, 3 beam sabers, 4 shields, and various missile pods.
  • Runner x 22, sticker, water slide, vinyl material Approximately 7.5" tall.
Check Stock

Hair Removal Machine, 110V Professional Hair Removal Tool Whitening Beauty Device for Face Body Salon Use

  • ★【 FUNCTION 】Effective air and water cooling system with copper radiator, adjustable contact cooling temperature from -4℃~0℃, makes the treatment more comfortable..
  • ★【 HAIR REMOVAL 】Wavelength: 480nm/530nm/640nm. Ideal for full body hair removal, including arms, underarms, legs and back, etc. Long-lasting effect, small handles for quick operation, healthy and effective..
  • ★【 APPLICATION 】Microcomputer flash counter for individual hand piece to record every shot. Our hair removal machine is widely used by spa, skin management cernter, skin beauty office and home use..
  • ★【 PLEASE NOTE 】After receiving the machine, it must be filled with water before it can be connected to the power. How to add water: Open the overflow nozzle first and add water to the water filling nozzle, until you can see the water flows out from the overflow nozzle. After filling up the water, close the overflow nozzle only，do not close the water filling nozzle..
  • ★【 BEST SERVICE 】100% Refund Guarantee, please be assured the purchase. Our products are sent from the US and can be delivered quickly. If you have any questions or quality issue,please feel free to contact us. NICE CHOOSE will do our best to help you solve the problem..
Check Stock