Reviews Barrel Bolt Latches

KLMHT Replaces Trailer Axle Dust Cap Cup Grease Cover & with Rubber Plugs RV Camper Utility 1.98\(2 Pack)

  • Dome Head Torx barrel truss nut 5/16" x .625"L (coarse thread) Zinc plated steel.
  • Head diameter (1.00") Barrel length from inside of flange 5/8" (.625") long.
  • Open ended, bolt will pass thru, No bolts included.
  • Use on Cambar cargo trailer Rear & side door Latches.
Check Stock

Generic 2pcs Barrel Bolt Latch Antique Brass Door Slide Latch Lock Heavy Duty Gate Sliding Bolt Latch for Doors and Windows

  • sliding bolt gate latch Smooth polishing treatment, not easy to rust, not easy to paint off..
  • shed lock latch Adopting premium stainless steel material with corrosion resistance, which let you use for a very long time..
  • sliding lock barrel bolt This door lock is very easy to install, giving you a lot of convenience..
  • door clasp hasp Door latches are suitable for doors, wooden doors, windows, fences, bathrooms, bedrooms, bars..
  • sliding bolt door lock Easy and convenient to install and use, a very useful door lock..
Check Stock

AR-House Sus-304 Stainless Steel Security Door Guard Lever Action Flush Bolt Latch Slide Bolt Lock, Satin Nickel Brushed (6 Inch (15 cm))

  • 1.A Sturdy Door Security Latch: Made of Thickened 304 Stainless Steel– High Quality– Protecting you and your families.
  • 2.Easy to use : Concealed & Barrel Slide Door Bolt Lock, Closed side panels, Spring tension lever action.
  • 3. Size : Length=6″(15cm), Width=3/4″(2cm), Depth = 5/8″(1.7cm).
  • 4. Beautiful & Practical–Hidden flush bolt latches, most of doors are applicable. Aesthetically pleasing appearance with a truly excellent satin finish..
  • 5. included: 1 door bolt Latch with a strike and screws..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Case Club Precision Rifle Pre-Cut Waterproof Case with Accessory Box & Silica Gel to Help Prevent Gun Rust (Gen 2)

  • Waterproof wheeled case comes with pre-cut foam to hold almost any Precision Rifle up to 49.3" long. If you have a Ruger Precision Rifle with folding stock, please refer to our (smaller) Ruger Precision Rifle Case made specifically for that rifle. 26" barrel RPRs will not fit. Also holds pistol, magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories..
  • Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves..
  • Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70" height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun. See image diagram for fitment guidance..
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean..
  • Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Case is ATA approved and can be shipped..
Check Stock

NATGAI 4 Pack Metal Lock Barrel Bolt Spring Loaded Locking Latch 6.5\ Long w/Grip Heavy Duty for Gate Shed Door Tailgate Trailer Garage (4 Pack)

  • 【Specification】: 6.5 Inch long spring bolt - 0.5" diameter round bolt - mounting plate: 1-9/16 inch by 3 inch.
  • 【Heavy Duty】: Constructed of heavy duty metal.
  • zinc coated for rust protection, red handle cover for easy pulling and turning, ultra-durable and corrosion resistant, perfect for indoor and outdoor applications..
  • 【Quick Release】: This spring bolt can lock in the open position, making your life easier. Simply pull back the bolt and rotate in place against the retaining pins - the tension from the spring will hold the latch open. Once you are ready to lock up, simply rotate the handle and the pin will automatically release..
  • 【4 Mounting Holes】: Each unit comes with 4 mounting holes pre drilled for the quickest installation. These mounting holes are countersunk for a flush finish with screws and a semi recessed finish if bolting in place. (Fasteners not supplied).
  • 【Package Included】: 4 x Spring-loaded barrel latches.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

OTTFF 6¼x1¾ in Slide Bolt Gate Latch with 8.8mm Padlock Hole, 2.5mm Thick Base, Heavy Duty 304 Stainless Steel Latches, 14mm Dia. Solid Barrel Bolt, Electroplating Finish for Barn Fence Shed Basement

  • 2 Pack 304 Stainless Steel Latches with screw, rust-proof and strong toughness ensuring high quality and longevity..
  • Overall size 160x70x25mm(6¼x2¾x1 inches), weight 370g(13.2 oz), thick 2.5mm,The slidable length of the bolt is 2 inch..
  • Padlock hole 8.8mm (NOTE: Don't Include Padlock)..
  • Vertically / Horizontally flush mount. No need for installation skills, suitable for teenagers, women, the elderly etc..
  • Barrel bolt is suitable wooden/metal doors, windows, boxes, cabinets, fences, kennels, bathrooms, toilets, bars etc..
Check Stock

Runningfish Heavy Duty Copper Door Latch gate latches Rustic Design Cabin Hook Latch Door Lock

  • Metal & Style: Rustic & Traditional Solid Cast copper- Sliding barn door lock add a stylish but subtle vintage touch to any decor. This is a great choice for decorating gate latches and door latches.Wrought Copper material hook and latch from Runningfish is a great alternative to cast Copper material cabin hook, brass hasp, brushed nickel hook lock, and bronze flip latch.For centuries, copper materials have been a mixture of American retro and life experiences..
  • Anti-corrosive and sturdy small door hook latch is necessary .Pure copper Antique Barrel Bolt Buckle Length Reversible Vintage Rustic Design Cast copper Cabin Hook solved the problem of corrosion and fracturethat often occurs in many similar products on the market.Made out of Solid copper, The eye hook latch has durable, Anti-corrosion finishes..
  • Delicate Craft -- Smooth and elegant curve,polished surface,and natural edge radian bring good handing feelingand will not hurt your hand under any circum stances.STRONG AND DURABLE PREMIUM QUALITY CAST copper CABIN HOOKS – Unlike other cabin hooks on the market, Our cabin hook & eye latches are made with solid cast copper metal and finished with a rust resistant, silver-plated black powder paint..
  • Widely Application -- Be used for locking windows,shu....
Check Stock

Case Club Case Fits Ruger Precision Rifle. Pre-Cut, Waterproof, with Accessory Box and Silica Gel to Help Prevent Gun Rust

  • Waterproof wheeled case comes with pre-cut foam to hold your Ruger Precision with folding stock along with one pistol, 4 extra pistol magazines, 3-5 extra rifle magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories..
  • Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves..
  • Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70" height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun..
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean..
  • Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Case is ATA approved and can be shipped..
Check Stock