Reviews Barbed Hose Fittings Plastic

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

  • 【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
  • 【Size】3/8" Hose Barb x 1/2" Male Male thread..
  • 【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
  • 【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
  • 【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

DERNORD 2 Pack 1.5\ Tri Clamp to 0.5\ Hose Barbed Adapter SUS304 Sanitary Hose Barb Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

DERNORD 1.5\ Tri Clamp to 1\ Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch Barb Hose)

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock