Reviews Barbed Hose Clamps - BestBuyersPro.com

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
5/16-inch barb connects your hose and screws/unscrews from fitting.
Included hose clamps tighten seal on hose and are winged for easier use.

【Great Value】：Comes with 60 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：drip irrigation plugs tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:barbed hose end plug is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:closure goof hole plugs are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Push-on fittings are intended for use with Lok-On (push-on style) hose only.
Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Size: 1/2" NPTF male x 1/2" hose ID barbed.

【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..

Push-on fitting are intended for use with Lok-On (push-on style) hose only.
Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
3/8-inches NPTF male and 1/4-inches hose ID barbed.

Push-on fitting are intended for use with Lok-On (push-on style) hose only.
Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
1/4-inches NPTF male and 5/16-inches hose ID barbed.

Dixon push-on fitting are intended for use with Lok-On (push-on style) hose only.
Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
1/4-inches male NPTF and 1/2-inches hose ID barbed.

Made of durable Acetal for dependable performance and peace of mind.
Easy installation with barbed fittings for 3/8 inch I.D. (interior diameter) hose (purchase hose clamps separately).
designed for leaded, unleaded, and alcohol-blended fuel.
Specifically designed for Mercury/Mariner Brand engines and tanks.

Specifically designed for use with Johnson/Evinrude/OMC Brand engines and tanks.
Easy installation with barbed fittings for 3/8 inch I.D. (interior diameter) hose (purchase hose clamps separately).
designed for leaded, unleaded, and alcohol-blended fuel.
Made of durable Acetal for dependable performance and peace of mind.

✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..