Reviews Barb To Metric Thread

AC PERFORMANCE Aluminum Straight Male M18x1.5 to 5/16 Hose Barb Fuel Oil Pump Inlet Fitting Adapters Black M18x1.5mm Metric Thread to 8mm OD Tube Bare Pipe Connector with Aluminum washer

  • Black Anodized Finish for Durability and Strength.
  • Size: M18x1.5 to Ø8mm (5/16") Diameter barb, with aluminum spacer / washer.
  • Adaptor Style: male metric thread to barb adapter hexagon / hex head with washer.
  • Made of High Quality Lightweight 6061-T6 CNC machined billet Aluminum Material.
  • Black anodized finish for durability and strength.
Check Stock

Hygger 215 GPH Quick Water Change Aquarium Pump Submersible Fountain Water Pump Fish Tank Pond Drain Transfer Pump with 2 Adaptors

  • 【2-IN-1 Water Pump】this submersible water pump works like a charm in terms of aquarium water change, transferring water and powering fountain waterfall.
  • 【Low Water Level Draining】Easy to use, simply plug in power for quick water draining, this bottom intake pump can remove water level down to 1/4" and suck out 1/5" debris and fish waste with ease.
  • 【Powerful, Quiet Operation】Provides efficient, instant water flow, power: 18W, Maximum flow rate: 215 GPH.
  • Max Lift Height: 5.3ft (power cord's length: 6ft).
  • 【for Water Transfer Application】Oil-free magnetic driven motor, it is ideal for draining saltwater and freshwater aquarium, pond, fountain, hydroponic, pool, pool cover and hot tub.
  • 【Comes with 2 Barb Fittings】Presented two different sizes of barb fittings for desired water flow: 1/2" and 5/8", the thread size that fits ON TO the pump next to the handle is M16-2, which is a metric size.
Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

  • Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
  • -6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
  • The barb can use in 3/8" inner diameter fuel hose..
  • Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
  • Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

  • 【Excellent Fittings】* 2 In 1 Set，12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
  • 【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System， Air and Fuel Delivery ，Engine..
  • 【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
  • 【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
  • 【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).
Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

  • 【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
  • 【Size】3/8" Hose Barb x 1/2" Male Male thread..
  • 【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
  • 【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
  • 【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

PATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold

  • Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
  • Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
  • Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
  • Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
  • Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.
Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
  • Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check Stock

32 Pcs Upgrade Original Thread Checker Inch & Metric - Size Gauge Measuring Tool for Imperial and Metric Nuts ，32 Male/Female Gauges - 17 Inch & 15 Metric

  • Each size has a nut and bolt checker on the same gauge. 32 male/female gauges - 17 inch & 15 metric.The Thread Checker is especially well suited for distinguishing between similar inch and metric threads..
  • Thread sizes are permanently stamped onto each gauge (inch in Black, metric in white).The individual gauges rotate freely on the wire cable for fast thread verification..
  • We've added imperial and metric specifications to make it more complete than the models available on the market.These nut & bolt thread checkers are made of strong stainless steel，Inch gauges are clear zinc plated, metric gauges are black oxide..
  • Black Oxide for Metric Size:Includes 15 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75,M14x2.0,M16x1.5,M16x2.0..
  • Zinc Plated for Inch Size: Includes 17 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-18,5/8-11,5/8-11..
Check Stock

SAE and Metric Bolt Gauges Check-a-Thread Nut Fastener Size Tool

  • ✿America SAE type measuring range: 4 - 84, Metric & America SAE Type & British Metric: 0.25 - 6.0mm, Imperial: 4G - 62G US: 8, 10, 11, 14, 19, 28.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿Thread pitch gauge is used to check whether the dimensions of molds, machines and mechanical threads are correct. Center gauges are used for grinding and positioning threaded cutting tools on lathes.
  • ✿Including: 3 x Center Gauge + 1Pc America SAE Type Gauge + 1Pc Metric and Imperial Gauge.
  • ✿Use for check the thread size, can be used for measuring the metric, imperial and American SAE type screw thread.
Check Stock