Reviews Barb Fitting Adapters

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Kitchen Sink Side Sprayer with Quick Side Connector Compatible with Moen Faucet Head Replacement, Kitchen Sink Faucet Sprayer Attachment with Water Hose/Holder, Brushed Nickel Finish

  • 3 Adapters Included – Quick Connect Side adapter compatible with Moen + 1/4″ Barb + 3/8″ Barb connector..
  • Ideal Kitchen Faucet Kit – Kitchen faucet spray replacement involves all the parts needed: connector + hose + holder..
  • 1/4” Female Thread – The connector size of hose fitting is standard 1/4” female thread (1/4-18NPSM)..
  • High Quality – The kitchen sprayer heads and holders are made of durable ABS plastic, protect the sprayer from scratch and stain, ensuring long lifetime use..
  • Easy Installation and Use – Comes with hose, washer and side spray holder for convenient installation. One touch trigger action make it easy to use..
Check Stock

Beduan Stainless Steel 1/2\ Hose Barb, 3 Way Tee T Shape Barbed Co2 Splitter Fitting

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/2”Barb x 1/2”Barb x 1/2”Barb – 12mm Barb x 12mm Barb x 12mm Barb..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Barbed Co2 Splitter Fitting Pack of 2

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/4”Barb x 1/4”Barb x 1/4”Barb – 6mm Barb x 6mm Barb x 6mm Barb..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Camco TastePURE RV Water Filter with Flexible Hose Protector (40043)

  • This Accessory hose kit includes all the hoses required for use with a standard fresh water tank..
  • (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters..
  • (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump.
  • Fits standard tanks with 1.25" water fill port and 3/8" NPT connections..
Check Stock

Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)

  • Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
  • Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
  • hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
  • Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
  • Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
  • Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.
Check Stock

DERPIPE Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Union Barbed Splitter Fitting （pack of 2

  • Size: 1/4"Barb x 1/4"Barb x 1/4"Barb (6mm)..
  • Material: 304 stainless steel cast pipe fitting ,heavy duty,last for long lifetime,resistant to corrosion,low magnetic permeability..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, etc..
Check Stock

Bonsicoky 5Pcs Plastic Hose Barb Reducer Fitting 1/2 to 1/4 Hose Barb Union Adapter Connector Pipe Hose Fitting

  • WHAT CAN YOU GET - 5 x Plastic Hose Barb Reducer Fittings. It can be connected with 1/2" Hose ID & 1/4" Hose ID..
  • DURABLE MATERIAL - The hose barb reducer fitting is made of durable plastic which is no crack and longer lasting service. The hose barb reducer has a smooth surface and inner wall, which is lightweight and durable..
  • NICE PERFORMANCE - The barbed edge of the hose barb connector adopts exquisite craftsmanship, which makes it more tightly connected with the hose, stronger sealing, safe and reliable. The deep and smooth barb edge design of the hose barb connector makes work easier and more effective..
  • WIDE RANGE OF USE - The hose barb reducer fitting can connect hoses quickly and easily. It is suitable for applications in pharmaceutical, food, laboratory, chemical processing and handing, printing, labeling and others..
  • 90 DAYS MONEY BACK GUARANTEE - We believe that Bonsicoky wins your trust with quality and service. If you are not satisfied with the product, please contact us and we will refund the full amount. Now click ‘Add to Cart’ , this will be your most reliable choice and bring you a 100% worry-free shopping experience!.
Check Stock

SUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter with Sealant Brass Pipe Fittings Male Threaded with 12 Pcs Hose Clamp

  • 【Upgraded Hose Barb Kit】 : 12 air hose adapters with sealant and 12 hose clamps.
  • 【Improved Threaded End】 : Coated the male end with select sealant to a snug fit for creating an air tight environment. You can be relieved from the preparation of the sealing tape..
  • 【 High-quality Hose Clamps】 : Stainless products can be rustproof. With the hose end applied a clamp, it can help bite and lock the pipe more tightly. They wont break easily and the flexible long belt can be adjusted to your pipe's size..
  • 【 Sturdy Material】 : Brass made, an abrasion resistant material for use in prevention and protection of fittings against corrosion,scratches,dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand up to 100 °C (212 °F) and long period of wear and tear..
  • 【Versitile Applications】 : Impotable water, gas, oil, fuel and air tools are preferable and they also work well in various pipes.
Check Stock