Reviews Bar Diameter Measuring Gauge

VMV-1 Digital Vacuum Gauge,0-30000 Microns Range, 2% Accuracy, 7/16-20UNF Interface

  • 【Measuring Range】 The dual scale pointer pressure gauge uses three times the scale (PSI / Bar / KPa) to measure pressure, does not require batteries, and can meet your different needs. Measuring range: 0-300psi, 0-2000kpa, 0-20bar..
  • 【Accurate Measurement】 The dual-scale pointer pressure gauge can measure pressure without a battery. Good airtightness ensures accurate pressure measurement. The transparent dial cover and pointer display dial make reading more convenient..
  • 【Application】 The pressure gauge is an excellent pressure measuring tool with stable performance, which can be used to measure the pressure of water, oil, natural gas, and liquids. Stable performance, high reliability, easy to use and practical..
  • 【Size】 The pressure gauge measures approximately 11.3 x 9 x 3.2 cm/4.4 x 3.5 x 1.3 inches and weighs approximately 188 grams/6.6 ounces. Small size and easy to carry..
  • 【Easy to Install】In order to maintain the normal performance of the overflow hole, please leave a space of at least 10mm behind the work surface. Do not modify or block the overflow hole..
Check Stock

Industrial Tools Dial Bore Gauge Set, 50-160MM Measuring Range Micrometer Cylinder Tool Kit, 0.01 Graduation Interval Measurement

  • All-Metal Device: All-metal clamping device, fastening the meter head, stable and accurate, durable. Insulated grip, comfortable to hold, effective heat insulation, safe and reliable..
  • High Quality Gauge Head: Sealed gauge head, aluminum housing, glass mirror cover, waterproof and dustproof, clear scale, intuitive data, sturdy and wear-resistant..
  • Accurate Measurement: The bore gauge is used to measure the internal dimensions of the workpiece by comparison method. This inside diameter measuring instrument is equipped with good guiding protection bridge, which can be accurately and reliably self-centered..
  • High Accuracy: The measuring range of this micrometer is 50-160 mm. The measuring head has a movable probe at one end and an interchangeable probe at the other end that changes depending on the diameter of the hole being measured. Easy to use, easy to measure, and high accuracy of 0.01..
  • Packing List: 1 x Gauge Rod, 1 x Gauge Head, 5 x Measuring Rod. We sincerely provide you with high quality products, if you have any questions, please contact customer service, we will provide you with satisfactory service..
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

DuroSTEEL Janus 8'x8' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

Pangda 10 Pack Tyre Gauge Tyre Tread Depth Gauge Tool, Color Coded

  • Smart color coded: 3 different colors of areas on the bar show you a clear result of your tyre condition, providing simplicity and convenient for you.
  • Range marked clearly: red range on bar: 0 - 3/ 32.
  • These clear and accurate markings allow for easy and fast reading.
  • Easy and convenient to use: this tire gauge is an efficient tool to monitor tire tread levels.
  • And you can use it in a cost-saving way without charging.
  • Portable depth measuring gauge: the tire gauge is approx. 3.35 x 1.06 inch in size.
  • It features a pocket clip for easy carrying, you can clip it on your pocket, good for quick and convenient application.
  • Quantity: you will get 10 pack tyre thread depth gauges in the package, enough for your spare and replacement in daily life.
  • You can also send some to your family and friends.
Check Stock

Pressure and Vacuum Hand Pump Calibrator Pressure and Vacuum Gauges Alongwith Pump for Calibration Labs and Field Calibrations Model AI-DP1-2200

  • Measuring Parameters: Pressure and Vacuum.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar) | Master Gauge ( Vacuum & Pressure) Range: -1 to 25 Bar.
  • Material Of Construction: Aluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
  • Supply Scope: 1 Unit of Calibrator, 1 Unit of Master Gauge (Range: -1 to 25 Bar), 3 Nos Reducers (1/4", 1/2", 3/4"), Instruction Manual and....
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

Accusize Industrial Tools 2-24'' by 0.001'' Resolution Inside Micrometer Set, 3011-5051

  • The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting..
  • Carbide measuring faces. Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61".
  • Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum. Measuring length (mm) [Inch]. Resolution: 0.0001".
  • Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers..
Check Stock