Reviews Banding Clamping Tools

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

Cv Joint Ear Clamp Banding Tool Cv Boot Clamp Pliers Automotive Hose Axle Plier for  ATV UTV Most Cars Boot Clamps

  • Design:The CV joint boot clamps pilers are newly.With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • Funnction:This CV joint boot clamps pilers are key tools to fix the CV boots.They are used to bind, tenseion and sercure CV boot banding straps It helps you work morequickly.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • MATERIAL:CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish.It looks much more shinning and it is totally rust adn corrosion resistant. Safe and durable..
  • APPLICATIONS: Use with any banding up to 2/5-inch (10mm) in width and vacuum hoses,for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedess, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..
  • CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers ....
Check Stock

CV Joint Boot Clamp Pliers - 22Pcs CV Boot Clamps Kit Auto Repair Tool Automotive Hose Axle Plier CV Clamp Tool for Most Cars

  • CV BOOT CLAMP PLIERS – With 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 20PCS CV BOOT CLAMPS – 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It’s perfect for you to replace the car broken drive shaft CV boot clamp..
  • CV BOOT CLAMP TOOL KIT – We prepared 10Pcs small stainless steel cv boot clamps and 10Pcs large clamps for fixing cv boots. and 2pcs Auto Cv Joint Boot Clamps Pliers in this car banding tools kit, which is a perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • EAR CLAMP PLIERS – Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp pliers fits most of cars..
  • CV JOINT BOOT – The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
Check Stock

Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers,Stainless Steel Universal Adjustable AXLE CV Joint Boot Crimp Clamp Kit,Hose Axle Plier CV Clamp Tool CV Joint Banding Tools

  • ...igh-quality】CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • 【 2 Pcs CV Joint Boot Clamp Pliers 】 The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 【24 Pcs CV Boot Clamp】Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • 【Package Included】:1*CV Clamp Tool,1*CV Joint Boot Clamp Pliers,12*Small CV Boot Clamps,12*Large CV Boot Clamps.
  • 【CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers】 The CV joint boot clamps pilers are newly.AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers Fo....
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ...rap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you must use the CV Boot Joint Ear Clamp Banding Tool to do so.
  • ◇ Package Includes : Includes 2Pcs CV Joint Boot Clamp Pliers With 3 Pair Clamps.One piece plier with 4.25-inch (10.8cm) long plastic handle and 1-inch (2.5cm) long rubber grips on side levers for ultimate comfort..
Check Stock

Rockwell JawHorse Portable Material Support Station – RK9003, Black and green

  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools.
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method.
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot.
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects.
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would.
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push.
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force.
Check Stock

IDL Packaging - TSS.CW34.1830 3/4\ Heavy Duty Woven Cord Strapping Roll, 1640' Length, 1830 lb. Break Strength, 6\ x 3\ Core

  • RD Steel metal strapping perfect for a variety of applications: securing wide loads, bundling together various metals, roll end binding, pavers and bricks, bailing wire, securing packaged glass, paper, tools, etc., for shipping and handling.
  • 1/2" metal banding is excellent for indoor or outdoor use.
  • Steel strapping is strong and secure for heavy pallet strapping jobs.
  • Steel strapping material with break strength up to 1100 lbs. provides the strongest protection, more than poly strapping can provide.
  • Steel banding has rounded, smooth edges for safe application and to protects products but packaging gloves are still recommended while working with steel strapping.
  • The only difference between standard steel strapping coil and portable steel strapping coil is length and weight.
  • Make sure you use the correct tools with our steel strapping such as: A tensioner, sealer and strapping seals or a 3-in-1 sealless combination tools like MUL-16 or MUL-20 which can perform all operations.
Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Kreg KWS1000 Mobile Project Center

  • Premium Folding Workbench: This portable work table can be a sawhorse, assembly table, and clamping station.
  • Handy Woodworking Tools: The workshop table has a 350-lb capacity and a storage shelf with a 25-lb capacity.
  • Home Improvement Tools: The bench track holds clamp.
  • table gives clamping capabilities of a bench vise.
  • Secure Workshop Accessories: Bench dogs, drill holsters, and storage holes in mobile workbench secure supplies.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock

Binding Tool Kit for Strapping - Poly Strapping Tensioner Cutter & Sealer Manual Banding Tool Windlass Set for 1/2\- 3/4\ Width Polyester Polyproplyn Strap, with 200 Strapping Seals

  • RD Steel metal strapping perfect for a variety of applications: securing wide loads, bundling together various metals, roll end binding, pavers and bricks, bailing wire, securing packaged glass, paper, tools, etc., for shipping and handling.
  • 3/4" metal banding is excellent for indoor or outdoor use.
  • Steel strapping is strong and secure for heavy pallet strapping jobs.
  • Steel strapping material with break strength up to 1700 lbs. provides the strongest protection, more than poly strapping can provide.
  • Steel banding has rounded, smooth edges for safe application and to protects products but packaging gloves are still recommended while working with steel strapping.
  • The only difference between standard steel strapping coil and portable steel strapping coil is length and weight.
  • Make sure you use the correct tools with our steel strapping such as: A tensioner, sealer and strapping seals or a 3-in-1 sealless combination tools like MUL-16 or MUL-20 which can perform all operations.
Check Stock