Reviews Ballast For Lamp

[Must Bypass Ballast to Avoid Flick Smoke Burn] 6pcs E-Simpo 4Pin Conductive Gx24q to E26/E27 Lamp Base Adapter Short G24q to Medium Edison Light Socket Converter Replace CFL PL GX24Q Holder

  • This is 4P Short 15.5mm GX24Q Base, NOT FOR 2P.
  • NOT FOR DIY!!! NEED REWIRING/BYPASS/ REMOVE the ballast,the Ballast has a black and white wire on the....
  • THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT....
  • All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to....
  • There are LED bulbs with Driver compatible with the ballast,which you may find work without bypass ballast. BUT no LED Driver can be compatible with....
Check Stock

Phantom PHB2010 II 1000W Digital Ballast Black

  • EFFICIENT: Even with 1000 watts this grow light ballast is completely silent, energy-efficient, reliable, and lightweight for your indoor grow light....
  • MICROPROCESSOR: 32 MHz fully integrated microprocessor keeps your setup running smoothly.
  • PROTECTION: Hot-restrike programming to protect the lamp and ballast in the event of the ballast turning off unexpectedly.
  • BRIGHTNESS: 4 brightness settings: 60 percent, 75 percent, 100 percent, and Super Boost.
  • LIGHT SETTINGS: Light can be dimmed to save energy and also features end of life lamp protection and LED indication.
Check Stock

Ultra Sun Metal Halide (MH) Conversion Grow Lamp, 600-Watt - Runs On HPS Ballast

  • The Ultra Sun Mh Conversion Lamp Is Designed For Those Who Have An Existing Hps Ballast That Want To Also Be Able To Run Metal Halide Lamp Without Purchasing A Separate Metal Halide Ballast.
  • With A 6500°K Temperature, This Lamp Is Excellent For The Vegetative Cycle Of Plants And Full Term Growing.
  • This Lamp Has Been Specifically Engineered For Horticulture Applications.
Check Stock

GE UltraStart Proline Electronic Ballast 120/277 Volt Program/Rapid Start Ballast Normal Ballast Factor Ballast for Fluorescent Light 1 or 2 Lamp T12

  • REPLACeMENT FOR MAGNETIC ELECTRONIC BALLASTS: These high-performance ballasts are designed for replacement of magnetic T12 ballasts during maintenance....
  • BALLASTS FOR ENERGY SAVINGS AND EFFICIENCY: GE MVP T12 ballasts have the same wiring and mounting requirements as standard magnetic ballasts and....
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps, as well as two-lamp or one-lamp orientation..
  • MULTIVOLT ELECTRONIC BALLAST: This T12 ballast handles voltage from 120 to 277 Volts..
  • LIGHTWEIGHT AND LOW-PROFILE BALLAST: Low-profile and lightweight housing simplifies installation, increases portability, and reduces transportation....
Check Stock

315w CMH Grow Light Kit- LEC Ceramic Metal Halide High Performance Package - 120 and 240 Volt Power Cables, 315 Watt Ballast 120/240v Volt, 3100K Lamp/Bulb, Mogul Socket Adapter

  • Bundle of 5 items: Mastercolor CDM-TP Elite 315W CMH Agro Lamp T12 - 3100ºK, Prism 315w 120/240v ballast, base socket adapter, and 2 Power Cords (120 & 240 Volt).
  • Elite Agro 315W T12 Lamp provides a compact and efficient metal halide solution for the horticulture market.
  • This lamp, combined with the efficient ballast, provides outstanding growth light performance over the life of the product..
  • Superior color quality. Crisp white light. Incredibly high 1.95 PPF (photosynthetic photon flux) per watt per second light source..
  • Comes with a socket adapter accommodating the lamp and a power cable that fits into the Prism ballast.
Check Stock

4pcs E-Simpo® 4-Pin GX24Q to E26/E27 Light Socket Adapter Need Bypass Ballast CFL G24Q 4P Lamp Base to Standard LED E26 e27 Lamp Base Holder Converter PBT Housing Rohs

  • Need BYPASS OR REMOVE the ballast, all phenom like smell smoke flicker burnt are caused by ballast which is not required....
  • THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT....
  • All pin-based CFL, like G24d Gx24d GX24Q GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must....
  • Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube.
Check Stock

GE Magnetic Ballast HID Ballast for 1 400-Watt Metal Halide Lamp Multi-5 Ballast 120 208 240 277 or 480 Volt 1-Pack Multi-Volt High Intensity Discharge Magnetic Ballast

  • MAGNETIC BALLASTS: GE magnetic ballast construction is ideal for a variety of applications..
  • EASY TO INSTALL BALLASTS: This HID ballast comes with a mounting bracket for easy installation options..
  • MULTIVOLT BALLAST: This HID ballast handles voltage of 120, 208, 240, 277, and 480-Volts..
  • HID BALLAST FOR METAL HALIDE LAMPS: This HID ballast will accept up to (1) 400-Watt metal halide lamp..
  • MAGNETIC HID BALLAST MOUNTING DIMENSIONS: This ballast has mounting dimensions of 4.4-Inch length by 3.9-Inch width. The mounting slot is set 0.2-Inch....
Check Stock

Luxrite 12-Pack 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC

  • ...h t8 LED light tube has an adjustable color switch attached which can be used to change between 3 cct color temperatures. Enjoy your lights at 3500K natural white, 4000K cool white, or 5000K bright white. Feel free to adjust your lights further by taking advantage of the dimming feature when using a dimming capable ballast..
  • PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
  • BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
  • CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the next 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted....
Check Stock

LUXRITE 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC (4 Pack)

  • ...h t8 LED light tube has an adjustable color switch attached which can be used to change between 3 cct color temperatures. Enjoy your lights at 3500K natural white, 4000K cool white, or 5000K bright white. Feel free to adjust your lights further by taking advantage of the dimming feature when using a dimming capable ballast..
  • PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
  • BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
  • CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the next 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted....
Check Stock

Advance IMH-39-G-BLS-1 Electronic Metal Halide Ballast 39W MH M130 120/277V

  • Ballast Output will shut down after 17 minutes if lamp does not ignite.
Check Stock